On Mon, 19 May 2008, Steve Brown wrote: > Dirk Nehring wrote: >> [...] >> make[5]: Leaving directory >> `/home/technik/dnehring/openwrt/build_dir/linux-brcm47xx/linux-2.6.25.1' >> make[5]: Entering directory >> `/home/technik/dnehring/openwrt/build_dir/linux-brcm47xx/linux-2.6.25.1' >> CHK include/linux/version.h >> CHK include/linux/utsrelease.h >> CALL scripts/checksyscalls.sh >> CHK include/linux/compile.h >> CC drivers/ssb/driver_pcicore.o >> drivers/ssb/driver_pcicore.c: In function 'ssb_pcicore_fixup_pcibridge': >> drivers/ssb/driver_pcicore.c:314: error: implicit declaration of function >> 'pcibios_enable_device' >> make[7]: *** [drivers/ssb/driver_pcicore.o] Error 1 >> make[6]: *** [drivers/ssb] Error 2 >> make[5]: *** [drivers] Error 2 >> make[5]: Leaving directory >> `/home/technik/dnehring/openwrt/build_dir/linux-brcm47xx/linux-2.6.25.1' >> make[4]: *** >> [/home/technik/dnehring/openwrt/build_dir/linux-brcm47xx/linux-2.6.25.1/.image] >> Error 2 >> make[4]: Leaving directory >> `/home/technik/dnehring/openwrt/target/linux/brcm47xx' >> >> And, iproute2 must be updated (works with iproute2-2.6.25.tar.bz2).
Yes. I have a patch waiting to go in, but I'm waiting for confirmation (or time to test it) that it works under older kernels as well. >> > I added the following to config-2.6.25. > > CONFIG_PCI=y > CONFIG_SYS_HAS_EARLY_PRINTK=y > CONFIG_EARLY_PRINTK=y > # CONFIG_MEMSTICK is not set > # CONFIG_SGI_IP28 is not set > # CONFIG_THERMAL is not set > > The config_pci is to get the declaration for pcibios_enable_device to be > included. A better solution would be to add the missing ifdef around > that code. Not really. The platform has PCI, so that config setting should be set. Possibly there are some config dependencies that should go in so that you don't get a compilation failure. > I was pretty surprised at having to add the commented lines. If they > aren't there, you get questions from the 'make oldconfig' during the > kernel build. Sorry. If I understood exactly where to set things to get the right resultant .config, it would work more often. > The early printk stuff was to try to figure why it would boot on a > Buffalo whr-hp-54g, but not an Asus wl520gu. I still don't know why. CONFIG_BCM47XX sets CONFIG_SYS_HAS_EARLY_PRINTK, so you shouldn't need to set that. I can't work out where CONFIG_EARLY_PRINTK is set in my config, maybe by hand? That should probably go in. -- Peter Denison _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
