Karthik,
Thanks very much! Best Regards, Gary _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Karthik Venkateswaran Sent: Tuesday, August 05, 2008 12:04 PM To: OpenWrt Development List Subject: Re: [OpenWrt-Devel] how to briding lan and wan Gary, After analyzing the config.sh from /lib/network (for Kamikaze 7.09: * The bridge is only supported as interface type. option type {bridge} option proto {static, dhcp} * If you are interested in bridging your lan and wan interface you could have more success adding it as a type in both interfaces. * I also had to tweak with the firewall settings for bridging to work. Good day, Karthik Venkateswaran "Gary Li" <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 08/05/2008 06:58 AM Please respond to OpenWrt Development List <openwrt-devel@lists.openwrt.org> To "'OpenWrt Development List'" <openwrt-devel@lists.openwrt.org> cc Subject Re: [OpenWrt-Devel] how to briding lan and wan Hi Karthik, I just try to change lan option proto. The conf is as below: config interface loopback option ifname lo option proto static option ipaddr 127.0.0.1 option netmask 255.0.0.0 config interface lan option ifname eth0 option proto bridge option ipaddr '192.168.8.180' option netmask 255.255.255.0 config interface wan option ifname eth1 option proto dhcp the result of ifconfig command: eth0 Link encap:Ethernet HWaddr 00:01:C1:00:42:80 inet addr:192.168.8.188 Bcast:192.168.8.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:112374 errors:0 dropped:0 overruns:0 frame:0 TX packets:892 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9910188 (9.4 MiB) TX bytes:154740 (151.1 KiB) eth1 Link encap:Ethernet HWaddr 00:01:C1:00:42:81 inet addr:192.168.7.188 Bcast:192.168.7.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:197 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:63040 (61.5 KiB) fp Link encap:Ethernet HWaddr 00:00:00:00:00:00 UP RUNNING MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:178 errors:0 dropped:0 overruns:0 frame:0 TX packets:178 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:27024 (26.3 KiB) TX bytes:27024 (26.3 KiB) Thanks, Best Regards, Gary _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Karthik Venkateswaran Sent: Monday, August 04, 2008 8:18 PM To: OpenWrt Development List Subject: Re: [OpenWrt-Devel] how to briding lan and wan Can you cut and paste your /etc/config/network and ifconfig to give more clarity. Cheers, Karthik Venkateswaran "Gary Li" <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 08/04/2008 05:11 PM Please respond to OpenWrt Development List <openwrt-devel@lists.openwrt.org> To <openwrt-devel@lists.openwrt.org> cc Subject [OpenWrt-Devel] how to briding lan and wan Hi all, When I try to modify configuration to support brige in the etc/config/netwok. And execute network restart. I got a error: Interface type bridge not supported. Anyone know how to do that? Thanks, Best regards, Gary ____________________________________________________________________________ _________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ______________________________________________________________________ ____________________________________________________________________________ _________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ______________________________________________________________________
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
