On Tue, May 05, 2009 at 09:27:26PM +0300, Linkodas wrote: > Hi list/community, > > we would like to introduce new router supporting OpenWRT. > It is only in development stage and we are looking for community opinion > regarding its features and possibilities. There still currently a chance > to change something and take into community response. > This board is referenced to low-cost and low-power solutions. > Any comments and opinions are very welcome! > > Below are preliminary specifications: > > PCB form factor: Pico-ITX (10cm x 7.2cm, fanless) > > Onboard CPU: Cortina Systems CS3516 (300Mhz ARM9 Core) > Onboard DDR SDRAM: 128Mb 333Mhz 32bit > Onboard NAND FLASH: 128Mb (or more) > Onboard LAN: 2x 10/100Mbps Ethernet > Onboard SATA: 2x SATA > > Onboard connectors: 2x SATA, 2x mini-PCI slots, 1x mini-PCI Express > (with USB 2.0 interface), 1x UART, 1x Pico-ITX power, 1x JTAG, GPIO ports > > Back panel connectors: 2x RJ-45 LAN, 2x USB 2.0, 3x antenna (GSM, 3G, > Wifi, Wimax, other), 1x RS232 > > Management: Watch Dog Timer, Brown-out Reset, RTC with battery > > Operating system: OpenWRT with newest 2.6 Linux Kernel. > Bootloader: U-boot
Sounds great. My wishlist: * SIM card slot for mini-PCI express would be great! * Gigabit ethernet instead of FE. * SDHC-slot or CF-Slot Dirk _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
