Hello everybody, I use an at91rm9200-based board, and can see below, but cannot mount it. any hints?
mmc0: host does not support reading read-only switch. assuming write-enable. mmc0: new SD card at address 566d mmcblk0: mmc0:566d S032B 29.6 MiB mmcblk0:<7>mmc0: starting CMD18 arg 00000000 flags 000000b5 Tian _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel