Hi, I´m having massive problems accessing my DLINK DIR-300 after flashing with the new OpenWrt Backfire 10.03 RC3.
If I use my normal tool to flash the device, I can´t ping the device and can´t access it over telnet/ssh/webinterface. I tried accessing on wan and lan ports on the IP 192.168.1.1 and I am in the same subnet. I used this tool http://x-alina.freifunk-potsdam.de/downloads/dir300-flash/ to flash and there was nothing abnormal during the flashprocess. I tried it several times. Flashing and accessing OpenWrt 8.09.02 works fine so I flashed OpenWrt 8.09.02 on the device. Then I reebooted and connected again over ssh and the ip I got with dhcp and flashed an openwrt backfire rc3 combined squashfs with sysupgrade. Then I connected the device over the wan port an could ping it. Nmap shows it as well. But I can´t acces the webiterface, ssh or telnet because I get an connection refused. I did the same procedure with sysupgrade -n (to not save my config files) and I got complete failure again. I have no serial cable here to look what´s going on in the device so I can´t provide you with more data. Please make OpenWrt Backfire usabale on DIR-300 again because it is heavily used in several freifunk networks. Thanks Clemens
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel