Looking at the printk my patch adds, the vendor EC (IIRC Samsung) should match, but I see '0' and '0' for major and minor chars.
I think it's likely that the more specific patch will work, I'm looking in to setting up a test now. On Sat, May 8, 2010 at 10:26 AM, Michael Evans <mjevans1...@gmail.com> wrote: > I can try it later tonight; ah I see, that's for a different arch. > This is a generic issue why wasn't that shared with all arches? > > It may fix //my// issue, but shouldn't the right thing to do be to > accept any chip claiming basic CFI compliance? > > On Sat, May 8, 2010 at 5:13 AM, <j...@phrozen.org> wrote: >> could you try if >> trunk/target/linux/etrax/patches-2.6.32/200-samsung_flash.patch >> fixes your issues ? >> >> Quoting "Michael J. Evans" <mjevans1...@gmail.com>: >> >>> At LEAST >>> 8MB flash: K8D6316UBM-PI07 Samsung Electronics 64M Bit >>> (8M x8/4M x16) Dual Bank NOR Flash Memory >>> memory falls in to the else statement. However it otherwise functions. >>> >>> if (extp->MajorVersion != '1' || >>> (extp->MinorVersion < '0' || extp->MinorVersion > '4')) { >>> if (cfi->mfr == MANUFACTURER_SAMSUNG && >>> (extp->MajorVersion == '3' && extp->MinorVersion == '3')) { >>> printk(KERN_NOTICE " Newer Samsung flash detected, " >>> "should be compatibile with Amd/Fujitsu.\n"); >>> } >>> else { >>> ... >>> } >>> } >>> >>> Note that it does so, and continue using the chip to //prevent// this >>> result: >>> >>> physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank >>> Amd/Fujitsu Extended Query Table at 0x0040 >>> Unknown Amd/Fujitsu Extended Query version 0.0. >>> gen_probe: No supported Vendor Command Set found >>> physmap-flash physmap-flash.0: map_probe failed >>> VFS: Cannot open root device "<NULL>" or unknown-block(0,0) >>> Please append a correct "root=" boot option; here are the available >>> partitions: >>> Kernel panic - not syncing: VFS: Unable to mount root fs on >>> unknown-block(0,0) >>> >>> Signed-off-by: Michael J. Evans <mjevans1...@gmail.com> >>> >>> --- a/drivers/mtd/chips/cfi_cmdset_0002.c >>> +++ b/drivers/mtd/chips/cfi_cmdset_0002.c >>> @@ -83,7 +83,7 @@ static struct mtd_chip_driver cfi_amdstd_chipdrv = { >>> }; >>> >>> >>> -/* #define DEBUG_CFI_FEATURES */ >>> +#define DEBUG_CFI_FEATURES >>> >>> >>> #ifdef DEBUG_CFI_FEATURES >>> @@ -368,6 +368,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info >>> *map, int primary) >>> >>> extp = (struct cfi_pri_amdstd*)cfi_read_pri(map, adr, >>> sizeof(*extp), "Amd/Fujitsu"); >>> if (!extp) { >>> + printk(KERN_INFO >>> + "Flash chip doesn't appear to use the >>> Amd/Fujitsu command set.\n"); >>> kfree(mtd); >>> return NULL; >>> } >>> @@ -382,12 +384,10 @@ struct mtd_info *cfi_cmdset_0002(struct map_info >>> *map, int primary) >>> "should be compatibile with >>> Amd/Fujitsu.\n"); >>> } >>> else { >>> - printk(KERN_ERR " Unknown Amd/Fujitsu >>> Extended Query " >>> - "version %c.%c.\n", >>> extp->MajorVersion, >>> + printk(KERN_ERR " WARNING: Unknown >>> Amd/Fujitsu Extended Query " >>> + "vendor: %4x version %c.%c. If defaults >>> fail look up the chip.\n", >>> + (int) cfi->mfr, extp->MajorVersion, >>> extp->MinorVersion); >>> - kfree(extp); >>> - kfree(mtd); >>> - return NULL; >>> } >>> } >>> >>> >>> --- a/drivers/mtd/chips/cfi_probe.c >>> +++ b/drivers/mtd/chips/cfi_probe.c >>> @@ -18,7 +18,7 @@ >>> #include <linux/mtd/cfi.h> >>> #include <linux/mtd/gen_probe.h> >>> >>> -//#define DEBUG_CFI >>> +#define DEBUG_CFI >>> >>> #ifdef DEBUG_CFI >>> static void print_cfi_ident(struct cfi_ident *); >>> _______________________________________________ >>> openwrt-devel mailing list >>> openwrt-devel@lists.openwrt.org >>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >>> >> >> >> >> -- >> John Crispin >> hacking, coding, etc >> blogic on irc >> >> _______ ________ __ >> | |.-----.-----.-----.| | | |.----.| |_ >> | - || _ | -__| || | | || _|| _| >> |_______|| __|_____|__|__||________||__| |____| >> |__| W I R E L E S S F R E E D O M >> KAMIKAZE (bleeding edge) ----------------------- >> * 10 oz Vodka Shake well with ice and strain >> * 10 oz Triple sec mixture into 10 shot glasses. >> * 10 oz lime juice Salute! >> --------------------------------------------------- >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel