With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.
uboot environment config is used by fw_printenv fw_setenv tools.
Signed-off-by: Luka Perkov <open...@lukaperkov.net>
---
Index: target/linux/lantiq/base-files/etc/uci-defaults/uboot_environment
===================================================================
--- target/linux/lantiq/base-files/etc/uci-defaults/uboot_environment
(revision 0)
+++ target/linux/lantiq/base-files/etc/uci-defaults/uboot_environment
(working copy)
@@ -0,0 +1,32 @@
+#!/bin/sh
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+
+uboot_environment_configuration() {
+ local dev=$1
+ local offset=$2
+ local envsize=$3
+ local secsize=$4
+ local numsec=$5
+ echo "$dev $offset $envsize $secsize $numsec" > /etc/fw_env.config
+}
+
+[ -e /etc/config/fw_env.config ] && exit 0
+
+. /lib/lantiq.sh
+
+board=$(lantiq_board_name)
+
+case "$board" in
+GIGASX76X)
+ uboot_environment_configuration "/dev/mtd1" "0x0" "0x10000" "0x10000"
"1"
+ ;;
+
+*)
+ # custom foo goes here
+ true
+ ;;
+esac
+
+exit 0
Property changes on:
target/linux/lantiq/base-files/etc/uci-defaults/uboot_environment
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
