On 22/03/12 17:48, Spyridon Tompros wrote: > Dear all, > > we have been using OpenWRT on Lantiq's evaluation board with the > following details. > Target Lantiq GPON/XWAY > Subtarget Danube > Target Profile (EASY50712) > > We have tested the following the following USB drivers provided with the > latest openwrt/trunk version (downloaded yesterday): > -Kmod-usb-core > -Kmod-usb2 > -Kmod-serial-to-usb > > In all cases we observe lost packets when sending files to a PC and > receiving them back. Some times the kernel crashes, while crashes happen > always when we try to physically connect a USB HUB or a media USB device. > > > As a workaround We've tried to implement another USB port by using an > external Vinculum VNC1L Chip. It works connected to a serial port. The > problem we encounter now is that the UART0 port of the Danube seems > dead.... We discovered that even if we write the respective register > (MCON), it remains incactive. Moreover we've tried to include the UART0 > as console from the make menuconfig util and the result was the same. > > Has anybody activated the second serial port of Danube?
Hi, It has worked in the past, but i have not tried it in a while, i have a twinpass baord with 2 serial ports and will add this on my todo list for tomorrow John _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
