On Wed, 2012-05-23 at 18:25 +0100, Conor O'Gorman wrote: > On Tue, 2012-05-22 at 14:01 +0200, John Crispin wrote: > > On 21/05/12 22:14, Spyridon Tompros wrote: > > > On 21/05/2012 18:16, John Crispin wrote: > > >> On 21/05/12 17:48, Spyridon Tompros wrote: > > >>> Hi all, > > >>> > > >>> currently we test our last left-for-testing xDSL interface. The Danube > > >>> tries to synchronise but without result. Might be a SW problem of the > > >>> OpenWRT trunk version we use. Our HW is totally identical to that of > > >>> Lantiq's RDK. We've also used the add-on front-end of Lantiq's RDK in > > >>> the place of ours with the same results. > > >> So you mean that you plug a cable into the AFE and you get no link > > >> resulting in no showtime ? Did you try the same image on a easy50712 ? > > > Exactly (periodically reports "leaving showtime"). We've checked it on > > > an easy RDK. It works but marginally. (Takes too much time to get > > > connected) while Danube gets very hot. > > >> > > > > Ok, so it works but the experience is "its slow". > > > > Hmm, I've tried it here on a custom board. A backfire based old image > gets to showtime. Recent trunk build does not. >
The firmware reports identical: DSL_CPE#>vig nReturn=0 DSL_DriverVersionApi=3.24.4.4 DSL_ChipSetFWVersion=2.4.4.0.0.1 DSL_ChipSetHWVersion=1.5 DSL_ChipSetType=Ifx-Danube DSL_DriverVersionMeiBsp=5.0.0 nReturn=0 DSL_DriverVersionApi=3.24.4.4 DSL_ChipSetFWVersion=2.4.4.0.0.1 DSL_ChipSetHWVersion=1.5 DSL_ChipSetType=Ifx-Danube DSL_DriverVersionMeiBsp=5.0.0 The control app behaves rather differently, spawning a number of processes on backfire, but only one on trunk. Plus the changes to the params. Backfire 1021 root 1204 S /sbin/dsl_cpe_control -i -f /lib/firmware/ModemHWE.bi 1027 root 1204 S /sbin/dsl_cpe_control -i -f /lib/firmware/ModemHWE.bi 1028 root 1204 S /sbin/dsl_cpe_control -i -f /lib/firmware/ModemHWE.bi 1029 root 1204 S /sbin/dsl_cpe_control -i -f /lib/firmware/ModemHWE.bi 1030 root 1204 S /sbin/dsl_cpe_control -i -f /lib/firmware/ModemHWE.bi Trunk 1304 root 7408 S /sbin/dsl_cpe_control -i00_00_00_00_00_01_00_00 -n / Apologies if this is just noise. _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
