Hi Jonas
Thanks for reply. attachment is the dmesg log. this kernel build at 'Jun 8
16:44:01 CST 2012'
base on svn://svn.openwrt.org/openwrt/trunk@32117, works just fine under Ben
Nanonote(QI_LB60).
Xiangfu
On 06/08/2012 08:20 PM, Jonas Gorski wrote:
What can I do for remove the 'broken' on xburst target?
Well, what you already did; test it ;) And since it works for you, it
looks like the broken mark can be removed. Could you perhaps provide a
bootlog for verification?
Jonas
[ 0.000000] Linux version 3.3.8 (xiangfu@macbook) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 PREEMPT Fri Jun 8 16:44:01 CST 2012
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0ad0024f (Ingenic JZRISC)
[ 0.000000] SDRAM preconfigured: bus:1 bank:2 rows:13 cols:9
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 8044b4d0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 8128
[ 0.000000] Kernel command line: mem=32M console=tty0 console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] Memory: 27708k/32768k available (3292k kernel code, 5060k reserved, 1042k data, 232k init, 0k highmem)
[ 0.000000] NR_IRQS:190
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.010000] Calibrating delay loop... 334.23 BogoMIPS (lpj=1671168)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.090000] Mount-cache hash table entries: 512
[ 0.110000] NET: Registered protocol family 16
[ 0.130000] gpiochip_add: registered GPIOs 0 to 31 on device: Bank A
[ 0.140000] gpiochip_add: registered GPIOs 32 to 63 on device: Bank B
[ 0.150000] gpiochip_add: registered GPIOs 64 to 94 on device: Bank C
[ 0.160000] gpiochip_add: registered GPIOs 96 to 127 on device: Bank D
[ 0.170000] JZ4740 GPIO initialized
[ 0.180000] Qi Hardware JZ4740 QI LB60 setup
[ 0.280000] bio: create slab <bio-0> at 0
[ 0.310000] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.320000] Switching to clocksource jz4740-timer
[ 0.440000] NET: Registered protocol family 2
[ 0.450000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.460000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.470000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.480000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.490000] TCP reno registered
[ 0.490000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.510000] NET: Registered protocol family 1
[ 0.530000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.540000] msgmni has been set to 54
[ 0.550000] io scheduler noop registered
[ 0.560000] io scheduler deadline registered (default)
[ 0.590000] Console: switching to colour frame buffer device 53x21
[ 0.610000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.620000] serial8250.0: ttyS0 at MMIO 0x10030000 (irq = 17) is a 16550
[ 0.630000] console [ttyS0] enabled, bootconsole disabled
[ 0.640000] serial8250.0: ttyS1 at MMIO 0x10031000 (irq = 16) is a 16550
[ 0.660000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)
[ 0.670000] jz4740-nand jz4740-nand.0: Found chip 0 on bank 1
[ 0.680000] Scanning device for bad blocks
[ 0.960000] Creating 4 MTD partitions on "jz4740-nand":
[ 0.970000] 0x000000000000-0x000000400000 : "NAND BOOT partition"
[ 0.980000] 0x000000400000-0x000000800000 : "NAND KERNEL partition"
[ 0.990000] 0x000000800000-0x000020800000 : "NAND ROOTFS partition"
[ 1.000000] 0x000020800000-0x000080000000 : "NAND DATA partition"
[ 1.010000] jz4740-nand jz4740-nand.0: Successfully registered JZ4740 NAND driver
[ 1.020000] UBI: attaching mtd2 to ubi0
[ 1.030000] UBI: physical eraseblock size: 524288 bytes (512 KiB)
[ 1.040000] UBI: logical eraseblock size: 516096 bytes
[ 1.050000] UBI: smallest flash I/O unit: 4096
[ 1.060000] UBI: VID header offset: 4096 (aligned 4096)
[ 1.070000] UBI: data offset: 8192
[ 1.440000] UBI: max. sequence number: 17
[ 1.480000] UBI: attached mtd2 to ubi0
[ 1.490000] UBI: MTD device name: "NAND ROOTFS partition"
[ 1.500000] UBI: MTD device size: 512 MiB
[ 1.510000] UBI: number of good PEBs: 1024
[ 1.520000] UBI: number of bad PEBs: 0
[ 1.530000] UBI: number of corrupted PEBs: 0
[ 1.540000] UBI: max. allowed volumes: 128
[ 1.550000] UBI: wear-leveling threshold: 4096
[ 1.560000] UBI: number of internal volumes: 1
[ 1.570000] UBI: number of user volumes: 1
[ 1.580000] UBI: available PEBs: 0
[ 1.590000] UBI: total number of reserved PEBs: 1024
[ 1.600000] UBI: number of PEBs reserved for bad PEB handling: 10
[ 1.610000] UBI: max/mean erase counter: 2/1
[ 1.620000] UBI: image sequence number: 7583887
[ 1.630000] UBI: background thread "ubi_bgt0d" started, PID 262
[ 1.670000] g_ether gadget: using random self ethernet address
[ 1.680000] g_ether gadget: using random host ethernet address
[ 1.690000] usb0: MAC 46:f9:e1:a5:59:a1
[ 1.700000] usb0: HOST MAC 82:45:2c:b4:91:bc
[ 1.710000] g_ether gadget: controller 'jz4740-udc' not recognized; trying CDC Ethernet (ECM)
[ 1.720000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 1.730000] g_ether gadget: g_ether ready
[ 1.740000] mousedev: PS/2 mouse device common for all mice
[ 1.750000] input: matrix-keypad as /devices/platform/matrix-keypad/input/input0
[ 1.770000] input: pwm-beeper as /devices/platform/pwm-beeper/input/input1
[ 1.790000] jz4740-rtc jz4740-rtc: rtc core: registered jz4740-rtc as rtc0
[ 1.820000] jz4740-mmc jz4740-mmc.0: JZ SD/MMC card driver registered
[ 1.880000] asoc: jz4740-hifi <-> jz4740-i2s mapping ok
[ 1.900000] ALSA device list:
[ 1.910000] #0: QI LB60
[ 1.910000] TCP westwood registered
[ 1.920000] NET: Registered protocol family 17
[ 1.940000] input: gpio-keys as /devices/platform/gpio-keys/input/input2
[ 1.950000] jz4740-rtc jz4740-rtc: setting system clock to 1970-01-01 00:00:00 UTC (0)
[ 2.100000] g_ether gadget: high-speed config #1: CDC Ethernet (ECM)
[ 2.270000] UBIFS: recovery needed
[ 2.920000] UBIFS: recovery completed
[ 2.920000] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.930000] UBIFS: file system size: 516096000 bytes (504000 KiB, 492 MiB, 1000 LEBs)
[ 2.940000] UBIFS: journal size: 10452992 bytes (10208 KiB, 9 MiB, 21 LEBs)
[ 2.950000] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 2.960000] UBIFS: default compressor: lzo
[ 2.970000] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.980000] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.990000] Freeing unused kernel memory: 232k freed
[ 9.590000] NET: Registered protocol family 36
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel