Hi, thanks for your patch. There are some issues with it though:
* The subject should contain [PATCH] and the subsystem it targets. * There is no Signed-off-by line, please add one. * The patch is sent as quoted-printable; please send the next revision as plain text. * Please don't add a patch fixing a previous patch, but rather fix it directly in 508-board_hw553.patch. See http://wiki.openwrt.org/doc/devel/patches on how to edit existing patches. Generally, please read https://dev.openwrt.org/wiki/SubmittingPatches on how to properly send patches. Regards Jonas On 8 October 2012 13:01, dani <dgcb...@gmail.com> wrote: > - Added the buttons for this bcm6358 board. > - The internal phy is unused in this board, deleted. > > Index: target/linux/brcm63xx/patches-3.3/board_HW553_buttons_net.patch > =================================================================== > --- target/linux/brcm63xx/patches-3.3/board_HW553_buttons_net.patch > (revisión: > 0) > +++ target/linux/brcm63xx/patches-3.3/board_HW553_buttons_net.patch (copia > de trabajo) > @@ -0,0 +1,43 @@ > +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c > ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c > +@@ -2500,15 +2500,9 @@ > + > + .has_uart0 = 1, > + > +- .has_enet0 = 1, > + .has_enet1 = 1, > + .has_pci = 1, > + > +- .enet0 = { > +- .has_phy = 1, > +- .use_internal_phy = 1, > +- }, > +- > + .enet1 = { > + .force_speed_100 = 1, > + .force_duplex_full = 1, > +@@ -2566,6 +2560,24 @@ > + .active_low = 1, > + }, > + }, > ++ .buttons = { > ++ { > ++ .desc = "reset", > ++ .gpio = 37, > ++ .type = EV_KEY, > ++ .code = KEY_RESTART, > ++ .active_low = 1, > ++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL, > ++ }, > ++ { > ++ .desc = "wps", > ++ .gpio = 9, > ++ .type = EV_KEY, > ++ .code = KEY_WPS_BUTTON, > ++ .active_low = 1, > ++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL, > ++ }, > ++ }, > + }; > + > + /* T-Home Speedport W 303V Typ B */ > Index: target/linux/brcm63xx/base-files/lib/brcm63xx.sh > =================================================================== > --- target/linux/brcm63xx/base-files/lib/brcm63xx.sh (revisión: 33652) > +++ target/linux/brcm63xx/base-files/lib/brcm63xx.sh (copia de trabajo) > @@ -82,6 +82,11 @@ > brcm63xx_has_reset_button="true" > ifname=eth0 > ;; > + HW553) > + status_led="HW553:red:power" > + brcm63xx_has_reset_button="true" > + ifname=eth0 > + ;; > NB6) > brcm63xx_has_reset_button="true" > ifname=eth0 > Index: target/linux/brcm63xx/base-files/etc/uci-defaults/network > =================================================================== > --- target/linux/brcm63xx/base-files/etc/uci-defaults/network (revisión: > 33652) > +++ target/linux/brcm63xx/base-files/etc/uci-defaults/network (copia de > trabajo) > @@ -19,6 +19,7 @@ > 96348A-122 |\ > 96358-502V |\ > CT6373-1 |\ > +HW553 |\ > AW4339U |\ > CPVA642 |\ > CT536_CT5621 |\ > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
