This patch adds support for the D-link DIR 632 router (hardware version A1)
Signed-off-by: Andrew McDonnell <b...@andrewmcdonnell.net> --- Notes: This patch is 420kb. Maybe I am doing something wrong :-| Given the entirety is to add support for a single device I am not sure how to logically split it - perhaps separate the ag7240 from the rest? Anyway, iaw. the patch submission guidelines I have uploaded it to github for the time being instead of inline here: https://raw.github.com/andymc73/openwrt-dir632/master/patch-dir632.txt This router has 8mb flash, 32m RAM, 8-port switch, WLAN, USB2 This should be considered 'beta'. I have the following bugs I havent managed to solve yet, now would be a great time for other sets of eyes: 0. To get any network at all I had to port the ag7240 device driver from DD-WRT. This brings over more than a dozen files. I think this is needed because switchs dont seem to connect properly when using the ar71xx_ag7240 driver already present in OpenWRT. I converted it to a platform device so the MAC addresses could be passed through from the init function. 1. The switch isn't "switching" - computers plugged into the switch can talk to the router but not each other. Hopefully just a boot configuration issue. 2. Wifi needs to be turned on as follows before it will work: uci set wireless.radio0.disabled=0 ; wifi up 3. Kernel - the wlan LED doesnt work yet 4. Kernel - the Power/Status LED only works in Orange (should be able to be Green as well) 5. Kernel - the WAN LED only works in Green (should be able to be in Orange as well) 6. Kernel - I was getting a 'warn_slowpath_common' stacktrace once in the kernel when the first packet is processed in the router, but it doesnt seem to affect performance 7. MAC addresses - I am not sure what the policy should be - the factory sets them all to the stickered MAC address, but DD-WRT reads a different MAC address from the ART partition. Currently I set the stickered MAC as the default for the WLAN, and use the ART for default eth0, and the ART 6th octet+1 for default eth1. 8. The LEDS dont seem to be doing the right thing in user space - at one point I had power/status flashing at boot but it doesn't currently Finally, could someone kindly please let me know how to make git diff put the line of ===== in between each file? :-) target/linux/ar71xx/base-files/etc/diag.sh | 3 + .../ar71xx/base-files/etc/uci-defaults/01_leds | 6 + .../ar71xx/base-files/etc/uci-defaults/02_network | 8 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + .../ar71xx/base-files/lib/upgrade/platform.sh | 1 + target/linux/ar71xx/config-3.8 | 26 +- .../ar71xx/files/arch/mips/ath79/mach-dir-632-a1.c | 403 +++ .../mips/include/asm/mach-ath79/ag71xx_platform.h | 6 + .../drivers/net/ethernet/atheros/ag7240/Kconfig | 124 + .../drivers/net/ethernet/atheros/ag7240/Makefile | 14 + .../drivers/net/ethernet/atheros/ag7240/ag7240.c | 2584 ++++++++++++++++++++ .../drivers/net/ethernet/atheros/ag7240/ag7240.h | 706 ++++++ .../net/ethernet/atheros/ag7240/ag7240_phy.h | 169 ++ .../net/ethernet/atheros/ag7240/ag7240_trc.h | 99 + .../drivers/net/ethernet/atheros/ag7240/ar7240.h | 984 ++++++++ .../net/ethernet/atheros/ag7240/ar7240_s26_phy.c | 1431 +++++++++++ .../ethernet/atheros/ag7240/ar7240_s26_phy.c.new | 1386 +++++++++++ .../net/ethernet/atheros/ag7240/ar7240_s26_phy.h | 224 ++ .../drivers/net/ethernet/atheros/ag7240/ar8216.c | 843 +++++++ .../drivers/net/ethernet/atheros/ag7240/ar8216.h | 187 ++ .../net/ethernet/atheros/ag7240/athrf1_phy.c | 385 +++ .../net/ethernet/atheros/ag7240/athrf1_phy.h | 26 + .../net/ethernet/atheros/ag7240/athrs16_phy.c | 896 +++++++ .../net/ethernet/atheros/ag7240/athrs16_phy.h | 245 ++ .../net/ethernet/atheros/ag7240/athrs_ioctl.h | 135 + .../net/ethernet/atheros/ag7240/athrs_qos.c | 196 ++ .../net/ethernet/atheros/ag7240/athrs_qos.h | 289 +++ .../drivers/net/ethernet/atheros/ag7240/eth_diag.h | 65 + .../net/ethernet/atheros/ag7240/python_vlan_igmp.c | 686 ++++++ .../net/ethernet/atheros/ag7240/rtl8309g_phy.c | 245 ++ .../net/ethernet/atheros/ag7240/rtl8309g_phy.h | 35 + .../net/ethernet/atheros/ag7240/tools/Makefile | 47 + .../net/ethernet/atheros/ag7240/tools/Makefile.inc | 84 + .../net/ethernet/atheros/ag7240/tools/ethreg.c | 141 ++ target/linux/ar71xx/generic/profiles/d-link.mk | 11 + target/linux/ar71xx/image/Makefile | 12 + .../617-MIPS-ath79-add-DIR-632-A1-support.patch | 39 + .../620-net-add-ag7240-driver-for-DIR-632-A1.patch | 19 + 38 files changed, 12760 insertions(+), 3 deletions(-) Applies against git clone SHA 5feba677c1d207c9a25ae47ea728bb9c795b2797 "feeds: fix syntax error" https://raw.github.com/andymc73/openwrt-dir632/master/patch-dir632.txt _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
