On Tue, Jun 25, 2013 at 8:25 AM, Conor O'Gorman <i...@conorogorman.net> wrote:
> On Tue, 2013-06-25 at 00:20 -0400, jonsm...@gmail.com wrote:
>> Can this be made to work on Ralink? When I have the adhoc0 interface
>> up bringing up ap0 says interface busy.....
>>
>
> Ralink is not good for supporting this type of setup. I had tried AP and
> client mode, and after some hacking it sort-of worked.
Maybe I asked the wrong question....
I want to run a mesh like batman. The examples on the batman site
should it being run in adhoc mode. Can I instead run it in mesh mode?
root@OpenWrt:/etc/config# iw list
Wiphy phy0
......
valid interface combinations:
* #{ AP, mesh point } <= 8,
total <= 8, #channels <= 1
--
Jon Smirl
jonsm...@gmail.com
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
