Signed-off-by: Felix Kaechele <hef...@fedoraproject.org>
---
target/linux/ramips/base-files/etc/diag.sh | 3 +
.../ramips/base-files/etc/uci-defaults/02_network | 3 +-
.../ramips/base-files/lib/preinit/06_set_iface_mac | 3 +-
target/linux/ramips/base-files/lib/ramips.sh | 3 +
.../ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/M4-4M.dts | 99 ++++++++++++++++++++++
target/linux/ramips/dts/M4-8M.dts | 99 ++++++++++++++++++++++
target/linux/ramips/image/Makefile | 3 +
target/linux/ramips/rt305x/profiles/poray.mk | 10 +++
9 files changed, 222 insertions(+), 2 deletions(-)
create mode 100644 target/linux/ramips/dts/M4-4M.dts
create mode 100644 target/linux/ramips/dts/M4-8M.dts
diff --git a/target/linux/ramips/base-files/etc/diag.sh
b/target/linux/ramips/base-files/etc/diag.sh
index a68538b..57c8beb 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -55,6 +55,9 @@ get_status_led() {
m3)
status_led="m3:blue:status"
;;
+ m4)
+ status_led="m4:blue:status"
+ ;;
mofi3500-3gn)
status_led="mofi3500-3gn:green:status"
;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network
b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 307330b..133c2de 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -226,7 +226,8 @@ ramips_setup_macs()
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
- m3)
+ m3 |\
+ m4)
lan_mac=$(mtd_get_mac_binary factory 4)
lan_mac=$(macaddr_add "$lan_mac" -1)
;;
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 86c19b0..f9aabd5 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -75,7 +75,8 @@ preinit_set_mac_address() {
mac=$(mtd_get_mac_binary factory 40)
ifconfig eth0 hw ether $mac 2>/dev/null
;;
- m3)
+ m3 |\
+ m4)
mac=$(mtd_get_mac_binary factory 4)
mac=$(macaddr_add "$mac" -1)
ifconfig eth0 hw ether $mac 2>/dev/null
diff --git a/target/linux/ramips/base-files/lib/ramips.sh
b/target/linux/ramips/base-files/lib/ramips.sh
index 7afa707..e3776f1 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -151,6 +151,9 @@ ramips_board_detect() {
*"Poray M3")
name="m3"
;;
+ *"Poray M4")
+ name="m4"
+ ;;
*"PWH2004")
name="pwh2004"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 4ac86e9..5e1a7a5 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -45,6 +45,7 @@ platform_check_image() {
hw550-3g | \
hg255d | \
m3 | \
+ m4 | \
mofi3500-3gn | \
mpr-a1 | \
mpr-a2 | \
diff --git a/target/linux/ramips/dts/M4-4M.dts
b/target/linux/ramips/dts/M4-4M.dts
new file mode 100644
index 0000000..86bd832
--- /dev/null
+++ b/target/linux/ramips/dts/M4-4M.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+ compatible = "M4", "ralink,rt5350-soc";
+ model = "Poray M4";
+
+ palmbus@10000000 {
+ sysc@0 {
+ ralink,pinmux = "i2c", "spi", "uartlite", "jtag",
"mdio", "sdram", "rgmii";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <1>;
+ };
+
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "pm25lq032";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "pm25lq032";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ status = "okay";
+ };
+
+ esw@10110000 {
+ status = "okay";
+ ralink,portmap = <0x2f>;
+ ralink,led_polarity = <1>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ status {
+ label = "m4:blue:status";
+ gpios = <&gpio0 9 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ wmac@10180000 {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+};
diff --git a/target/linux/ramips/dts/M4-8M.dts
b/target/linux/ramips/dts/M4-8M.dts
new file mode 100644
index 0000000..d07eb49
--- /dev/null
+++ b/target/linux/ramips/dts/M4-8M.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+ compatible = "M4", "ralink,rt5350-soc";
+ model = "Poray M4";
+
+ palmbus@10000000 {
+ sysc@0 {
+ ralink,pinmux = "i2c", "spi", "uartlite", "jtag",
"mdio", "sdram", "rgmii";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <1>;
+ };
+
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "gd25q64";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "gd25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ status = "okay";
+ };
+
+ esw@10110000 {
+ status = "okay";
+ ralink,portmap = <0x2f>;
+ ralink,led_polarity = <1>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ status {
+ label = "m4:blue:status";
+ gpios = <&gpio0 9 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ wmac@10180000 {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+};
diff --git a/target/linux/ramips/image/Makefile
b/target/linux/ramips/image/Makefile
index a14e723..34a52c2 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -376,6 +376,8 @@ Image/Build/Profile/FREESTATION5=$(call
BuildFirmware/Default8M/$(1),$(1),freest
Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3)
+Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
+
Image/Build/Profile/MOFI3500-3GN=$(call
BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN)
# Kernel name should be "Linux Kernel Image" to make the OpenWrt image
installable from factory Web UI
@@ -511,6 +513,7 @@ define Image/Build/Profile/Default
# $(call Image/Build/Profile/HG255D,$(1))
$(call Image/Build/Profile/HW550-3G,$(1))
$(call Image/Build/Profile/M3,$(1))
+ $(call Image/Build/Profile/M4,$(1))
$(call Image/Build/Profile/MOFI3500-3GN,$(1))
$(call Image/Build/Profile/MPRA2,$(1))
$(call Image/Build/Profile/MZKW300NH2,$(1))
diff --git a/target/linux/ramips/rt305x/profiles/poray.mk
b/target/linux/ramips/rt305x/profiles/poray.mk
index 972d7fd..10cf37f 100644
--- a/target/linux/ramips/rt305x/profiles/poray.mk
+++ b/target/linux/ramips/rt305x/profiles/poray.mk
@@ -15,3 +15,13 @@ define Profile/M3/Description
endef
$(eval $(call Profile,M3))
+
+define Profile/M4
+ NAME:=Poray M4
+ PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-netdev kmod-ledtrig-timer
+endef
+define Profile/M4/Description
+ Package set for Poray M4 board
+endef
+
+$(eval $(call Profile,M4))
--
1.8.3.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
