Enable GPIO 20. This hands off control of the blue planet led to the
integrated switch. Consequently, remove the led configuration for the
blue planet led.
Remove also the configuration for the orange planet led as both share
the same look-out.
Signed-off-by: Sebastian Kemper <sebastian...@gmx.net>
---
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c
index 21d4271..60d1e0e 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c
@@ -36,6 +36,8 @@
#define DIR825C1_GPIO_LED_BLUE_PLANET 18
#define DIR825C1_GPIO_LED_WIFI_BGN 13
+#define DIR825C1_GPIO_WAN_LED_ENABLE 20
+
#define DIR825C1_GPIO_BTN_RESET 17
#define DIR825C1_GPIO_BTN_WPS 16
@@ -69,15 +71,6 @@ static struct gpio_led dir825c1_leds_gpio[] __initdata = {
.active_low = 1,
},
{
- .name = "d-link:orange:planet",
- .gpio = DIR825C1_GPIO_LED_ORANGE_PLANET,
- .active_low = 1,
- },
- {
- .name = "d-link:blue:planet",
- .gpio = DIR825C1_GPIO_LED_BLUE_PLANET,
- .active_low = 1,
- }, {
.name = "d-link:blue:wifi_bgn",
.gpio = DIR825C1_GPIO_LED_WIFI_BGN,
.active_low = 1,
@@ -213,6 +206,9 @@ static void __init dir825c1_setup(void)
ath79_gpio_output_select(DIR825C1_GPIO_LED_BLUE_USB,
AR934X_GPIO_OUT_GPIO);
+ gpio_request_one(DIR825C1_GPIO_WAN_LED_ENABLE,
+ GPIOF_OUT_INIT_LOW, "WAN LED enable");
+
ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825c1_leds_gpio),
dir825c1_leds_gpio);
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
