2013/10/21 Marcin Jurkowski <marci...@gmail.com>: > This adds kernel support support for Sagemcom F@st 2704 wireless ADSL > router. > It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+ > modem equipped with 64 MiB RAM and 8 MiB flash. > > Signed-off-by: Marcin Jurkowski <marci...@gmail.com> > --- > .../brcm63xx/patches-3.10/803-board_fast2704.patch | 133 > +++++++++++++++++++++ > 1 file changed, 133 insertions(+) > create mode 100644 > target/linux/brcm63xx/patches-3.10/803-board_fast2704.patch > > diff --git a/target/linux/brcm63xx/patches-3.10/803-board_fast2704.patch > b/target/linux/brcm63xx/patches-3.10/803-board_fast2704.patch > new file mode 100644 > index 0000000..69a024f > --- /dev/null > +++ b/target/linux/brcm63xx/patches-3.10/803-board_fast2704.patch > @@ -0,0 +1,133 @@ > +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c > ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c > +@@ -1501,6 +1501,122 @@ static struct board_info __initdata boar > + }, > + }; > + > ++static struct board_info __initdata board_FAST2704V2 = { > ++ .name = "F@ST2704V2", > ++ .expected_cpu_id = 0x6328, > ++ > ++ .has_uart0 = 1, > ++ .has_pci = 1, > ++ .has_ohci0 = 1, > ++ .has_ehci0 = 1, > ++ .has_usbd = 1, > ++ > ++ .has_enetsw = 1, > ++ > ++ .enetsw = { > ++ .used_ports = { > ++ [0] = { > ++ .used = 1, > ++ .phy_id = 1, > ++ .name = "Port 1", > ++ }, > ++ [1] = { > ++ .used = 1, > ++ .phy_id = 2, > ++ .name = "Port 2", > ++ }, > ++ [2] = { > ++ .used = 1, > ++ .phy_id = 3, > ++ .name = "Port 3", > ++ }, > ++ [3] = { > ++ .used = 1, > ++ .phy_id = 4, > ++ .name = "Port 4", > ++ }, > ++ }, > ++ }, > ++ > ++ .leds = { > ++ // Front LEDs
Please use C99 style comments: /* Front LEDs */ other than that, this looks good to me. -- Florian _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel