On Sat, Jan 11, 2014 at 6:35 PM, Ernesto <forosylis...@ernet.com.ar> wrote:
> Hi all,
>
> I'm trying to add USB support to a broadcom 6328 based board, named
> 96328dg2x2. I used the definition of another board, 963281TAN, and added
> .has_ehci0 = 1 and ohci0 too, and configured gpio10 as a led. With this, I
> got to work usb-storage flawlessly.
>
> When I insert a ohci usb device, like pl2303 usb to serial converter, the
> system says:
>
> root@OpenWrt:/# dmesg | grep USB
> [    7.188000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [    7.320000] ehci-platform ehci-platform: new USB bus registered, assigned
> bus number 1
> [    7.348000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00,
> overcurrent ignored
> [    7.356000] hub 1-0:1.0: USB hub found
> [    7.380000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [    7.392000] ohci-platform ohci-platform: new USB bus registered, assigned
> bus number 2
> [    7.468000] hub 2-0:1.0: USB hub found
> [   10.676000] cdc_acm: USB Abstract Control Model driver for USB modems and
> ISDN adapters
> [   10.784000] usbhid: USB HID core driver
> [   10.812000] usbserial: USB Serial support registered for generic
> [   10.872000] usbserial: USB Serial support registered for ark3116
> [   11.160000] usbserial: USB Serial support registered for pl2303
> [  151.644000] usb 2-1: new full-speed USB device number 2 using
> ohci-platform
>
> The last message is the only indicator that a device has plugged, but it is
> not recognized by drivers. The previous are included as relevant context.

Try current trunk, I just committed a fix for that in r39274.


Jonas
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Reply via email to