SO GUYS, MERGE PLOX? On 9 Nov 2013 18:42, "Weedy" <weedy2...@gmail.com> wrote:
> On Sat, Nov 9, 2013 at 2:54 PM, David Lang <da...@lang.hm> wrote: > >> That doesn't slow down bitrot of the patches, that just works for one >> person's systems, for not. >> >> Is there something wrong with this series that is preventing it from >> being merged upstream? >> >> do you need people to report that they need it to get it review priority? >> >> do you need reports of it working for people? >> >> do you need someone to sponsor reviews of it? >> >> There are a lot of people out there who would like to run OpenWRT on >> their ADSL router (myself included), so I would think that there's interest >> in adding support for these sorts of devices. >> >> > ^ This. > Pretty much anyone getting upgraded to VDSL in Canada could want this. We > don't have a real bridge mode with the stock firmware and this is ass. > > > David Lang >> >> >> On Fri, 8 Nov 2013, Martijn Zilverschoon wrote: >> >> Well if you need this that badly, you can patch it yourself :) >>> >>> Checkout the git repository: >>> git clone git://git.openwrt.org/openwrt.git >>> >>> download the patches and apply them to the local git repo. >>> the command for that is: git apply 'example.patch' (make sure that you >>> are in the openwrt directory) >>> I think you have to apply 4 patches since this one is 1/4. >>> >>> Sorry for the earlier message that was incomplete. >>> >>> -Martijn >>> >>> 2013/11/8 Martijn Zilverschoon <thefriedzom...@gmail.com>: >>> >>>> Well if you need this that badly, you can patch it yourself :) >>>> >>>> git clone git://git.openwrt.org/openwrt.git >>>> >>>> >>>> 2013/11/8 Weedy <weedy2...@gmail.com>: >>>> >>>>> Can this pretty please not die to bitrot? >>>>> I need this merged so badly ;_; >>>>> >>>>> >>>>> On Thu, Oct 31, 2013 at 7:33 PM, Marcin Jurkowski <marci...@gmail.com> >>>>> wrote: >>>>> >>>>>> >>>>>> This adds kernel support support for Sagemcom F@st 2704 wireless ADSL >>>>>> router. >>>>>> It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+ >>>>>> modem equipped with 64 MiB RAM and 8 MiB flash. >>>>>> --- >>>>>> .../brcm63xx/patches-3.10/536-board_fast2704.patch | 133 >>>>>> +++++++++++++++++++++ >>>>>> 1 file changed, 133 insertions(+) >>>>>> create mode 100644 >>>>>> target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch >>>>>> >>>>>> diff --git a/target/linux/brcm63xx/patches-3.10/536-board_ >>>>>> fast2704.patch >>>>>> b/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch >>>>>> new file mode 100644 >>>>>> index 0000000..db34932 >>>>>> --- /dev/null >>>>>> +++ b/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch >>>>>> @@ -0,0 +1,133 @@ >>>>>> +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c >>>>>> ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c >>>>>> +@@ -1477,6 +1477,122 @@ static struct board_info __initdata boar >>>>>> + }, >>>>>> + }; >>>>>> + >>>>>> ++static struct board_info __initdata board_FAST2704V2 = { >>>>>> ++ .name = "F@ST2704V2", >>>>>> ++ .expected_cpu_id = 0x6328, >>>>>> ++ >>>>>> ++ .has_uart0 = 1, >>>>>> ++ .has_pci = 1, >>>>>> ++ .has_ohci0 = 1, >>>>>> ++ .has_ehci0 = 1, >>>>>> ++ .has_usbd = 1, >>>>>> ++ >>>>>> ++ .has_enetsw = 1, >>>>>> ++ >>>>>> ++ .enetsw = { >>>>>> ++ .used_ports = { >>>>>> ++ [0] = { >>>>>> ++ .used = 1, >>>>>> ++ .phy_id = 1, >>>>>> ++ .name = "Port 1", >>>>>> ++ }, >>>>>> ++ [1] = { >>>>>> ++ .used = 1, >>>>>> ++ .phy_id = 2, >>>>>> ++ .name = "Port 2", >>>>>> ++ }, >>>>>> ++ [2] = { >>>>>> ++ .used = 1, >>>>>> ++ .phy_id = 3, >>>>>> ++ .name = "Port 3", >>>>>> ++ }, >>>>>> ++ [3] = { >>>>>> ++ .used = 1, >>>>>> ++ .phy_id = 4, >>>>>> ++ .name = "Port 4", >>>>>> ++ }, >>>>>> ++ }, >>>>>> ++ }, >>>>>> ++ >>>>>> ++ .leds = { >>>>>> ++ /* front LEDs */ >>>>>> ++ { >>>>>> ++ .name = >>>>>> "F@ST2704V2:green:power", >>>>>> ++ .gpio = 4, >>>>>> ++ .active_low = 1, >>>>>> ++ .default_trigger = "default-on", >>>>>> ++ }, >>>>>> ++ { >>>>>> ++ .name = "F@ST2704V2 >>>>>> :red:power", >>>>>> ++ .gpio = 5, >>>>>> ++ .active_low = 1, >>>>>> ++ }, >>>>>> ++ { >>>>>> ++ .name = "F@ST2704V2 >>>>>> :red:inet", >>>>>> ++ .gpio = 2, >>>>>> ++ .active_low = 1, >>>>>> ++ }, >>>>>> ++ { >>>>>> ++ .name = "F@ST2704V2 >>>>>> :green:dsl", >>>>>> ++ .gpio = 3, >>>>>> ++ .active_low = 1, >>>>>> ++ }, >>>>>> ++ { >>>>>> ++ .name = "F@ST2704V2 >>>>>> :green:inet", >>>>>> ++ .gpio = 11, >>>>>> ++ .active_low = 1, >>>>>> ++ }, >>>>>> ++ { >>>>>> ++ .name = "F@ST2704V2 >>>>>> :green:usb", >>>>>> ++ .gpio = 1, >>>>>> ++ .active_low = 1, >>>>>> ++ }, >>>>>> ++ >>>>>> ++ /* side button LEDs */ >>>>>> ++ { >>>>>> ++ .name = "F@ST2704V2 >>>>>> :green:wps", >>>>>> ++ .gpio = 10, >>>>>> ++ .active_low = 1, >>>>>> ++ }, >>>>>> ++ >>>>>> ++ /* FIXME: can't control gpio0 line in "out" state, >>>>>> needs >>>>>> further investigation */ >>>>>> ++ /* >>>>>> ++ { >>>>>> ++ .name = >>>>>> "F@ST2704V2:green:rfkill", >>>>>> ++ .gpio = 0, >>>>>> ++ .active_low = 1, >>>>>> ++ }, >>>>>> ++ */ >>>>>> ++ >>>>>> ++ }, >>>>>> ++ .buttons = { >>>>>> ++ { >>>>>> ++ .desc = "reset", >>>>>> ++ .gpio = 23, >>>>>> ++ .active_low = 1, >>>>>> ++ .type = EV_KEY, >>>>>> ++ .code = KEY_RESTART, >>>>>> ++ .debounce_interval = >>>>>> BCM963XX_KEYS_DEBOUNCE_INTERVAL, >>>>>> ++ }, >>>>>> ++ { >>>>>> ++ .desc = "wps", >>>>>> ++ .gpio = 24, >>>>>> ++ .active_low = 1, >>>>>> ++ .type = EV_KEY, >>>>>> ++ .code = KEY_WPS_BUTTON, >>>>>> ++ .debounce_interval = >>>>>> BCM963XX_KEYS_DEBOUNCE_INTERVAL, >>>>>> ++ }, >>>>>> ++ { >>>>>> ++ .desc = "rfkill", >>>>>> ++ .gpio = 15, >>>>>> ++ .active_low = 1, >>>>>> ++ .type = EV_KEY, >>>>>> ++ .code = KEY_WLAN, >>>>>> ++ .debounce_interval = >>>>>> BCM963XX_KEYS_DEBOUNCE_INTERVAL, >>>>>> ++ }, >>>>>> ++ }, >>>>>> ++}; >>>>>> ++ >>>>>> + static struct board_info __initdata board_rta1025w_16 = { >>>>>> + .name = "RTA1025W_16", >>>>>> + .expected_cpu_id = 0x6348, >>>>>> +@@ -3810,6 +3926,7 @@ static const struct board_info __initcon >>>>>> + &board_963281TAN, >>>>>> + &board_963281T_TEF, >>>>>> + &board_dsl_274xb_f1, >>>>>> ++ &board_FAST2704V2, >>>>>> + #endif >>>>>> + #ifdef CONFIG_BCM63XX_CPU_6338 >>>>>> + &board_96338gw, >>>>>> -- >>>>>> 1.8.1.5 >>>>>> _______________________________________________ >>>>>> openwrt-devel mailing list >>>>>> openwrt-devel@lists.openwrt.org >>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> openwrt-devel mailing list >>>>> openwrt-devel@lists.openwrt.org >>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>>> >>>>> _______________________________________________ >>> openwrt-devel mailing list >>> openwrt-devel@lists.openwrt.org >>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>> >>> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> > >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel