From: Marek Lindner <ma...@open-mesh.com>
Signed-off-by: Marek Lindner <ma...@open-mesh.com>
[s...@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <s...@open-mesh.com>
---
target/linux/ar71xx/base-files/etc/diag.sh | 1 +
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +++
target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh | 1 +
4 files changed, 6 insertions(+)
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
b/target/linux/ar71xx/base-files/etc/diag.sh
index 7647039..616c8cc 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -98,6 +98,7 @@ get_status_led() {
status_led="nbg6716:white:power"
;;
om2p | \
+ om2pv2 | \
om2p-hs | \
om2p-lc)
status_led="om2p:blue:power"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index db60cee..aac13c4 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -151,6 +151,7 @@ nbg6716)
;;
om2p | \
+om2pv2 | \
om2p-hs | \
om2p-lc)
ucidef_set_led_netdev "port1" "port1" "om2p:blue:wan" "eth0"
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 02c46f9..fa11413 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -358,6 +358,9 @@ ar71xx_board_detect() {
*OM2P)
name="om2p"
;;
+ *OM2Pv2)
+ name="om2pv2"
+ ;;
*"OM2P HS")
name="om2p-hs"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
b/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
index fb8ef19..9eac5ef 100644
--- a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
@@ -59,6 +59,7 @@ platform_check_image_openmesh()
case "$img_board_target" in
OM2P)
[ "$board" = "om2p" ] && break
+ [ "$board" = "om2pv2" ] && break
[ "$board" = "om2p-lc" ] && break
[ "$board" = "om2p-hs" ] && break
echo "Invalid image board target ($img_board_target)
for this platform: $board. Use the correct image for this platform"
--
2.0.0.rc4
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
