That would be correct, and if done with quilt, as ive now completed testing
the patches from the list if we can get one solid diff
submitted to patchwork i can help walk it up the commit tree with those
powers that be.
On Fri, Jun 13, 2014 at 10:29 PM, and...@polkaspots.com <
and...@polkaspots.com> wrote:
> As you have more experience than me, I need to turn to you, adding this
> chip in, is actually a generic patch, as other may have it as well?
> I can see that generic patches are apply as well when ar711 is called.
>
>
>
> On 13/06/14 13:14, Outback Dingo wrote:
>
> duh.... it reversed the nics, i plugged into the poe and 192.168.1.1 is
> reachable.... i was plugged into the secondary port
>
> im in its live
>
>
> On Fri, Jun 13, 2014 at 10:09 PM, and...@polkaspots.com <
> and...@polkaspots.com> wrote:
>
>> Do you have a serial console?
>> Plug the main directly in to your network and do an arp scan for the mac.
>>
>>
>> On 13/06/14 13:06, Outback Dingo wrote:
>>
>> Shoot..... its not coming up....... after the tftp it was flashing white
>> blue white blue white blue for a bit then stopped.....
>>
>> doesnt seem to be doing much....... cant ping 192.168.1.1 from my
>> host........ hrmmmmm.... should i unplug plug it back in
>>
>>
>> On Fri, Jun 13, 2014 at 10:05 PM, and...@polkaspots.com <
>> and...@polkaspots.com> wrote:
>>
>>> Great!
>>> I was confused about the Tx-Power: 18 dBm but that makes sense, as it
>>> has 2 x 5dBi passive gain antennas. So the total will actually be 28.
>>> Powerful little one.
>>>
>>>
>>> On 13/06/14 12:53, Outback Dingo wrote:
>>>
>>> tftp> put
>>> openwrt-ar71xx-generic-ubnt-unifi-outdoor-plus-squashfs-factory.bin
>>> Sent 6881628 bytes in 4.0 seconds
>>>
>>>
>>> FINALLY.....
>>>
>>>
>>> On Fri, Jun 13, 2014 at 9:49 PM, Outback Dingo <outbackdi...@gmail.com>
>>> wrote:
>>>
>>>> yeah i just noticed that you dropped that from the initial patch,
>>>> caught it fixed it and now i have an image.
>>>>
>>>> its been too long, need more coffee.......... but Thanks.......
>>>> always something simple
>>>>
>>>>
>>>> On Fri, Jun 13, 2014 at 9:46 PM, and...@polkaspots.com <
>>>> and...@polkaspots.com> wrote:
>>>>
>>>>> Oh, sorry I think is actually my bad, I didn’t paste everything, grrr
>>>>>
>>>>>
>>>>> target/linux/ar71xx/image/Makefile:
>>>>>
>>>>>
>>>>> $(eval $(call
>>>>> SingleProfile,UAPPRO,64k,UAPPRO,ubnt-uap-pro,UAP-PRO,ttyS0,115200,BZ,BZ,ar934x))+$(eval
>>>>> $(call
>>>>> SingleProfile,UAPPRO,64k,UBNTUNIFIOUTDOORPLUS,ubnt-unifi-outdoor-plus,UBNT-U20,ttyS0,115200,BZ,BZ,ar7240))
>>>>>
>>>>>
>>>>> On 13/06/14 12:42, Outback Dingo wrote:
>>>>>
>>>>> seriously..... i did it even exactly as you stated and still no
>>>>> joy..........
>>>>>
>>>>> and ive been using/developing on WRT for 6+ years.... Grrrrrrr what
>>>>> did i miss
>>>>> -rw-r--r-- 1 dingo dingo 5636096 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-root.squashfs
>>>>> -rw-r--r-- 1 dingo dingo 5308420 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-root.squashfs-64k
>>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-airrouter-squashfs-factory.bin
>>>>> -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-airrouter-squashfs-sysupgrade.bin
>>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory.bin
>>>>> -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-sysupgrade.bin
>>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-ls-sr71-squashfs-factory.bin
>>>>> -rw-r--r-- 1 dingo dingo 6488064 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-ls-sr71-squashfs-sysupgrade.bin
>>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-nano-m-squashfs-factory.bin
>>>>> -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-nano-m-squashfs-sysupgrade.bin
>>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-rocket-m-squashfs-factory.bin
>>>>> -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-rocket-m-squashfs-sysupgrade.bin
>>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-rspro-squashfs-factory.bin
>>>>> -rw-r--r-- 1 dingo dingo 6488064 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-rspro-squashfs-sysupgrade.bin
>>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-rs-squashfs-factory.bin
>>>>> -rw-r--r-- 1 dingo dingo 6488064 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-rs-squashfs-sysupgrade.bin
>>>>> -rw-r--r-- 1 dingo dingo 6881628 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-uap-pro-squashfs-factory.bin
>>>>> -rw-r--r-- 1 dingo dingo 6881284 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-uap-pro-squashfs-sysupgrade.bin
>>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-factory.bin
>>>>> -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-sysupgrade.bin
>>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-unifi-squashfs-factory.bin
>>>>> -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-ubnt-unifi-squashfs-sysupgrade.bin
>>>>> -rw-r--r-- 1 dingo dingo 1425844 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-uImage-gzip.bin
>>>>> -rw-r--r-- 1 dingo dingo 1034289 Jun 13 21:37
>>>>> openwrt-ar71xx-generic-uImage-lzma.bin
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Fri, Jun 13, 2014 at 8:48 PM, and...@polkaspots.com <
>>>>> and...@polkaspots.com> wrote:
>>>>>
>>>>>> Ubiquiti all, The outdoor+ profile is not defined, so it will call
>>>>>> the normal Outdoor if you select that one.
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 13/06/14 11:47, Outback Dingo wrote:
>>>>>>
>>>>>> Your building target for Ubiquiti all ? or UniFi OutDoor ?
>>>>>>
>>>>>>
>>>>>> On Fri, Jun 13, 2014 at 8:35 PM, and...@polkaspots.com <
>>>>>> and...@polkaspots.com> wrote:
>>>>>>
>>>>>>> Then it hasent been generated.
>>>>>>>
>>>>>>> Try :
>>>>>>>
>>>>>>> Do a make dirclean
>>>>>>>
>>>>>>> Change this :
>>>>>>>
>>>>>>> Modify target/linux/ar71xx/image/Makefile:
>>>>>>>
>>>>>>> +$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO
>>>>>>> UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTUNIFI
>>>>>>> UBNTUNIFIOUTDOOR UBNTUNIFIOUTDOORPLUS UAPPRO))
>>>>>>> $(eval $(call MultiProfile,WNDR3700,WNDR3700V1 WNDR3700V2 WNDR3800
>>>>>>> WNDRMAC WNDRMACV2))
>>>>>>> $(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
>>>>>>> $(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
>>>>>>>
>>>>>>> do a make kernel_menuconfig
>>>>>>> exit without doing anything
>>>>>>> cd build_dir
>>>>>>> find | grep m25p80.c
>>>>>>> should show up something in drivers/mtd/devices/
>>>>>>> add the patch in
>>>>>>> +++ m25p80.c 2014-04-05 00:27:58.000000000 +0000
>>>>>>> @@ -677,6 +677,8 @@
>>>>>>> { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
>>>>>>> { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
>>>>>>> { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
>>>>>>> + { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) },
>>>>>>>
>>>>>>> /* Everspin */
>>>>>>> { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2) },
>>>>>>>
>>>>>>> and then do a make again.
>>>>>>> It should generate it fine.
>>>>>>>
>>>>>>>
>>>>>>> On 13/06/14 11:31, Outback Dingo wrote:
>>>>>>>
>>>>>>> ive applied the patches but its not building that specific image
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Jun 13, 2014 at 8:30 PM, and...@polkaspots.com <
>>>>>>> and...@polkaspots.com> wrote:
>>>>>>>
>>>>>>>> Ah that’s wrong, you need to have one called
>>>>>>>> openwrt-ar71xx-generic-ubnt-unifi-outdoor-plus-squashfs-factory.bin not
>>>>>>>> openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-factory.bin, the
>>>>>>>> firmware check is different.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On 13/06/14 11:29, Outback Dingo wrote:
>>>>>>>>
>>>>>>>> somethings odd here.... would you have an image i can test ??
>>>>>>>>
>>>>>>>> tftp> bin
>>>>>>>> tftp> timeout 120
>>>>>>>> tftp> put
>>>>>>>> openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-factory.bin
>>>>>>>> Error code 2: Firmware check failed
>>>>>>>> Sent 6356992 bytes in 9.7 seconds
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, Jun 13, 2014 at 8:27 PM, and...@polkaspots.com <
>>>>>>>> and...@polkaspots.com> wrote:
>>>>>>>>
>>>>>>>>> Hi there,
>>>>>>>>>
>>>>>>>>> I have one as well and managed to put the firmware on using his
>>>>>>>>> patch.
>>>>>>>>> Now i'm just trying to wrap my head around how quilt works.
>>>>>>>>>
>>>>>>>>> Will update you as soon as I have something.
>>>>>>>>> By the way, is this the correct way to reply to this patchworks
>>>>>>>>> digest?
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>>
>
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
