On Sat, 2014-07-26 at 10:48:35 +0800, Zhao, Gang wrote: > Tested on a tp-link wr703n, all seem okay. > Oh, it seems there are some problems about the phy, all network cards are unusable :-( Will investigate it later. At least this patch set made a bootable kernel...
> The last patch "fix spi ath79 fast read" should be backported to > 3.10(barrier breaker), it will be sent separately. > > The boot log: > root@OpenWrt:/# dmesg > [ 0.000000] Linux version 3.14.12 (zhao@hello.world) (gcc version 4.8.3 > (OpenWrt/Linaro GCC 4.8-2014.04 r41595) ) #1 Sat Jul 26 09:43:28 CST 2014 > [ 0.000000] MyLoader: sysp=388dd517, boardp=04505212, parts=7709ac36 > [ 0.000000] bootconsole [early0] enabled > [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) > [ 0.000000] SoC: Atheros AR9330 rev 1 > [ 0.000000] Determined physical RAM map: > [ 0.000000] memory: 02000000 @ 00000000 (usable) > [ 0.000000] Initrd not found or empty - disabling initrd > [ 0.000000] Zone ranges: > [ 0.000000] Normal [mem 0x00000000-0x01ffffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x00000000-0x01ffffff] > [ 0.000000] On node 0 totalpages: 8192 > [ 0.000000] free_area_init_node: node 0, pgdat 80334420, node_mem_map > 81000000 > [ 0.000000] Normal zone: 64 pages used for memmap > [ 0.000000] Normal zone: 0 pages reserved > [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 > [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. > [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize > 32 bytes > [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 > [ 0.000000] pcpu-alloc: [0] 0 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total > pages: 8128 > [ 0.000000] Kernel command line: board=TL-WR703N console=ttyATH0,115200 > rootfstype=squashfs,jffs2 noinitrd > [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) > [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) > [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) > [ 0.000000] Writing ErrCtl register=00000000 > [ 0.000000] Readback ErrCtl register=00000000 > [ 0.000000] Memory: 28652K/32768K available (2363K kernel code, 122K > rwdata, 496K rodata, 208K init, 187K bss, 4116K reserved) > [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > [ 0.000000] NR_IRQS:51 > [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, > Ref:25.000MHz > [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) > [ 0.080000] pid_max: default: 32768 minimum: 301 > [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 > bytes) > [ 0.100000] NET: Registered protocol family 16 > [ 0.100000] MIPS: machine is TP-LINK TL-WR703N v1 > [ 0.360000] bio: create slab <bio-0> at 0 > [ 0.370000] Switched to clocksource MIPS > [ 0.370000] NET: Registered protocol family 2 > [ 0.380000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.380000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.390000] TCP: Hash tables configured (established 1024 bind 1024) > [ 0.390000] TCP: reno registered > [ 0.400000] UDP hash table entries: 256 (order: 0, 4096 bytes) > [ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > [ 0.410000] NET: Registered protocol family 1 > [ 0.410000] PCI: CLS 0 bytes, default 32 > [ 0.420000] futex hash table entries: 256 (order: -1, 3072 bytes) > [ 0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher > [ 0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) > (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. > [ 0.460000] msgmni has been set to 55 > [ 0.460000] io scheduler noop registered > [ 0.460000] io scheduler deadline registered (default) > [ 0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled > [ 0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = > 1562500) is a AR933X UART > [ 0.480000] console [ttyATH0] enabled > [ 0.490000] bootconsole [early0] disabled > [ 0.500000] m25p80 spi0.0: found s25sl032p, expected m25p80 > [ 0.510000] m25p80 spi0.0: s25sl032p (4096 Kbytes) > [ 0.510000] 5 tp-link partitions found on MTD device spi0.0 > [ 0.520000] Creating 5 MTD partitions on "spi0.0": > [ 0.520000] 0x000000000000-0x000000020000 : "u-boot" > [ 0.530000] 0x000000020000-0x00000012aa2c : "kernel" > [ 0.530000] mtd: partition "kernel" must either start or end on erase > block boundary or be smaller than an erase block -- forcing read-only > [ 0.550000] 0x00000012aa2c-0x0000003f0000 : "rootfs" > [ 0.550000] mtd: partition "rootfs" must either start or end on erase > block boundary or be smaller than an erase block -- forcing read-only > [ 0.560000] mtd: device 2 (rootfs) set to be root filesystem > [ 0.570000] 1 squashfs-split partitions found on MTD device rootfs > [ 0.570000] 0x0000002f0000-0x0000003f0000 : "rootfs_data" > [ 0.580000] 0x0000003f0000-0x000000400000 : "art" > [ 0.590000] 0x000000020000-0x0000003f0000 : "firmware" > [ 0.610000] libphy: ag71xx_mdio: probed > [ 1.240000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 > [uid=004dd041, driver=Generic PHY] > [ 1.240000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII > [ 1.250000] TCP: cubic registered > [ 1.250000] NET: Registered protocol family 17 > [ 1.260000] 8021q: 802.1Q VLAN Support v1.8 > [ 1.270000] VFS: Mounted root (squashfs filesystem) readonly on device > 31:2. > [ 1.280000] Freeing unused kernel memory: 208K (8034c000 - 80380000) > [ 3.430000] random: mktemp urandom read with 44 bits of entropy available > [ 6.270000] eth0: link up (100Mbps/Full duplex) > [ 6.820000] jffs2: notice: (297) jffs2_build_xattr_subsystem: complete > building xattr subsystem, 17 of xdatum (0 unchecked, 16 orphan) and 28 of > xref (0 dead, 16 orphan) found. > [ 6.860000] eth0: link down > [ 16.830000] device eth0 entered promiscuous mode > [ 26.390000] random: nonblocking pool is initialized > > [...] _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel