The DHT11 is a temperature and humidity sensor supported by linux since 3.14.
This patch has been tested on recent mxs with kernel 3.14.18. Signed-off-by: Harald Geyer <har...@ccbib.org> --- package/kernel/linux/modules/other.mk | 20 ++++++++++++++++++++ 1 files changed, 20 insertions(+), 0 deletions(-) diff --git a/package/kernel/linux/modules/other.mk b/package/kernel/linux/modules/other.mk index d56bb50..bef24eb 100644 --- a/package/kernel/linux/modules/other.mk +++ b/package/kernel/linux/modules/other.mk @@ -258,6 +258,26 @@ endef $(eval $(call KernelPackage,iio-ad799x)) + +define KernelPackage/iio-dht11 + SUBMENU:=$(OTHER_MENU) + DEPENDS:=kmod-iio-core @GPIO_SUPPORT + TITLE:=DHT11 (and compatible) humidity and temperature sensors + KCONFIG:= \ + CONFIG_DHT11 + FILES:=$(LINUX_DIR)/drivers/iio/humidity/dht11.ko + AUTOLOAD:=$(call AutoLoad,56,dht11) +endef + +define KernelPackage/iio-dht11/description + support for DHT11 and DHT22 digitial humidity and temperature sensors + attached at GPIO lines. You will need a custom device tree file to + specify the GPIO line to use. +endef + +$(eval $(call KernelPackage,iio-dht11)) + + define KernelPackage/lp SUBMENU:=$(OTHER_MENU) TITLE:=Parallel port and line printer support -- 1.7.2.5 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel