Martin-
Yes, it does. The LOCO images are only in the trunk, not in 14.07 - only
the nanostation xw images are currently in 14.07.
Is there any chance we could get the LOCO xw images (which, I suspect,
would also be the Bullet/Pico xw images) built for the "final" 14.07?
-Bill
On 09/24/2014 10:02 AM, heini66 wrote:
you're using 14.07 images?
ubiquity releaed new a new hardwaregesign on the m5 that will only
work with trunk or 14.07 ...
http://wiki.openwrt.org/toh/ubiquiti/nanostationm5
hope this helps.
martin
2014-09-24 18:21 GMT+02:00 Bill <bmoff...@ayrstone.com
<mailto:bmoff...@ayrstone.com>>:
I just got 5 LOCO M5 units that won't run OpenWRT. They are
datestamped 1422K; when I try to flash them, they give me:
received ERROR <code=2, msg=Firmware check failed>
I am using the Bullet M image
(openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory.bin),
flashing with tftp in binary mode.
I have one other LOCO M5 with datestamp 1340K that works fine -
flashes fine every time. But the new units won't take the firmware
at all.
I assume UBNT did something in the bootloader that is disabling
OpenWRT.
Any help will be welcome. I can open one up and attach a serial
cable, but I'm not sure what I'd look for or what I'd do about it...
Thanks,
Bill
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
<mailto:openwrt-devel@lists.openwrt.org>
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
--
Bill Moffitt
Ayrstone Productivity
http://ayrstone.com
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
