Hi again, asterisk: set debug output on console console => notice,warning,error,debug
so, all software recognize correctly the correct port.... [Nov 11 15:08:06] DEBUG[894]: chan_lantiq.c:835 lantiq_dev_event_hook: on port 0 detected event off hook [Nov 11 15:08:10] DEBUG[894]: chan_lantiq.c:835 lantiq_dev_event_hook: on port 0 detected event on hook [Nov 11 15:08:24] DEBUG[894]: chan_lantiq.c:835 lantiq_dev_event_hook: on port 1 detected event off hook [Nov 11 15:08:26] DEBUG[894]: chan_lantiq.c:835 lantiq_dev_event_hook: on port 1 detected event on hook but both owsip and asterisk route call to TAPI/1 (and never TAPI/2) Regards Eddi On Mon, Nov 10, 2014 at 9:30 PM, Eddi De Pieri <[email protected]> wrote: > - tapidemo -d 1: (tapidemo-5.1.0.53) > > phone1 connected: > [...] > EASY80910: Detected event on channel 0: > ID: 0x20000005 (IFX_TAPI_EVENT_FXS_OFFHOOK) > [...] > > phone2 connected: > EASY80910: Detected event on channel 1: > ID: 0x20000005 (IFX_TAPI_EVENT_FXS_OFFHOOK) > Phone No 2: Event on DevIDX 0, PhoneCh 1, DataCh 1: > 0x20000005 (IFX_TAPI_EVENT_FXS_OFFHOOK) > Phone No 2: Off-Hook detected. > Phone No 2: FXS state: S_READY FXS event: IE_HOOKOFF > Phone No 2: Line mode changed to IFX_TAPI_LINE_FEED_ACTIVE > Phone No 2: DTMF detection started on EASY80910, DataCh 1, fd 5 > Phone No 2: LEC started on EASY80910, PhoneCh 1 > Phone No 2: Play Dialtone. > Phone No 2: Handling state executed, current FXS state: S_OUT_DIALTONE > EASY80910: Detected event on channel 1: > ID: 0x20000004 (IFX_TAPI_EVENT_FXS_ONHOOK) > Phone No 2: Event on DevIDX 0, PhoneCh 1, DataCh 1: > 0x20000004 (IFX_TAPI_EVENT_FXS_ONHOOK) > Phone No 2: On-Hook detected. > Phone No 2: FXS state: S_OUT_DIALTONE FXS event: IE_HOOKON > Phone No 2: TAPIDEMO_ClearPhone. > Phone No 2: DTMF detection stopped on EASY80910, data ch 1, fd 5 > Phone No 2: LEC stopped on EASY80910, phone ch 1 > Phone No 2: Line mode changed to IFX_TAPI_LINE_FEED_STANDBY > Phone No 2: Handling state executed, current FXS state: S_READY > EASY80910: Detected event on channel 1: > ID: 0x33000002 (IFX_TAPI_EVENT_TONE_GEN_END) > Phone No 2: Event on DevIDX 0, PhoneCh 1, DataCh 1: > 0x33000002 (IFX_TAPI_EVENT_TONE_GEN_END) > > - owsip + pjsip: > it start even if this device have >32mb ram > > no difference between phone1 and phone2 connected... > it works but but you have two connectors that seen just one fxs line > > - asterisk + chan_lantiq: > > no difference between phone1 and phone2 connected... > it works but but you have two connectors that seen just one fxs line > > Stay tuned... > > Let me know it this piece of log may help to understand how to patch owsip > and/or asterisk > > Regards > > On Tue, Oct 21, 2014 at 11:44 PM, Eddi De Pieri <[email protected]> wrote: > >> I've managed to get FXS working on my vgv7519 vr9 router using >> asterisk-chan-lantiq. >> >> busy/free tone ok >> chan-lantiq to sip ok >> sip to chan-lantiq to test. >> >> I need to do some other tests before start to release code for BB... >> >> Eddi >> > >
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
