On Wed, Nov 19, 2014 at 01:50:39PM -0500, Soren Harward wrote: > On Tue, Nov 18, 2014 at 6:50 AM, Chris Green <c...@isbd.net> wrote: > > I still have non-working gigabit ports on my Mikrotik 2011UiAS-2HnD. Soren > > Harward kindly had a look at various diagnostics but hasn't seen > > anything obvious wrong yet. > ... > > Looking at statistics for the Gigabit switch there's loads of data > > sent but nothing at all received. > > Not true on both counts: machines connected to the network are getting > IPv6 addresses from your router through SLAAC and DHCPv6, but IPv4 > isn't working. I haven't had time to dig through the information > you've sent me, and probably won't until next week. In the meantime, > start looking for problems above the hardware layer. > OK, sorry for the noise I've been making meanwhile, I'll be more patient. :-)
> Also, the USB port on the RB2011 is weirdly not hot-pluggable. You > have to connect the device first, then load the appropriate USB kernel > modules. > OK, I'll try that and see if I get anywhere. Thanks! :-) -- Chris Green _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel