yes, 3.14 is baseline for CC
On 05/12/2014 09:45, Claudio Thomas wrote: > Hi, do I understand it correctly. For CC is 3.14 planed? Thanks, > Claudio > > -- Reviewing OpenWrt BB for Xmodus Systems XM1710E GSM/UMTS Router > <http://www.xmodus-systems.de/en/terminals/routers.html> > > On 05.12.2014 09:07, John Crispin wrote: >> i intentionally don't set a date. i have done so in the past and >> got ranted at for not being on time. this happened with AA and BB >> so CC is illusive and will be ready when ready. all i will say is >> that i am already working on it, but you noticed that yourself >> :) >> >> >> On 05/12/2014 02:20, Karl P wrote: >>> That's the second[2] email I've seen that hints at some sort >>> of formal date being known for CC, or some plan, or some >>> detail. >>> >>> It would be appreciated if this magical special knowledge was >>> shared a little wider. I haven't seen _any_ emails or irc >>> conversations about _any_ dates or guidelines for any upcoming >>> release. I can't see any release branches. I don't know >>> where else I should be looking. >>> >>> Is there some release guidelines that I should know about? >>> Have there been decisions taken by anyone? I'm not asking to >>> be involved in the decision making process, but I would very >>> much like to know when decisions have been made. >>> >>> Sincerely, Karl P >>> >>> >>> >>> [2]http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg27746.html >>> >>> >>> >>> >>> >>> On 12/04/2014 10:53 PM, John Crispin wrote: >>>> great, oxnas will now be part of CC :) >>>> >>>> On 04/12/2014 23:51, Daniel Golle wrote: >>>>> This reverts commit >>>>> c81ddddde5fd193802d511b42eb7b108aac17136 on >>>>> https://gitorious.org/openwrt-oxnas/openwrt-oxnas.git >>>>> which removed patches and config for 3.14. >>>>> >>>>> [arm_introduce-dma-fiq-irq-broadcast patch was renamed to >>>>> match 3.18] >>>>> >>>>> Signed-off-by: Daniel Golle <dan...@makrotopia.org> --- >>>>> target/linux/oxnas/config-3.14 | 349 >>>>> +++++++++++++++++++++ >>>>> .../010-arm_introduce-dma-fiq-irq-broadcast.patch | 62 >>>>> ++++ ...-obtain-reset-controller-from-device-tree.patch | >>>>> 99 ++++++ .../250-add-plxtech-vendor-prefix.patch >>>>> | 12 + .../300-introduce-oxnas-platform.patch >>>>> | 79 +++++ >>>>> .../oxnas/patches-3.14/310-oxnas-clocksource.patch | 24 ++ >>>>> .../oxnas/patches-3.14/320-oxnas-irqchip.patch | 40 >>>>> +++ .../oxnas/patches-3.14/330-oxnas-pinctrl.patch | >>>>> 32 ++ .../linux/oxnas/patches-3.14/340-oxnas-pcie.patch | >>>>> 23 ++ .../linux/oxnas/patches-3.14/350-oxnas-reset.patch | >>>>> 20 ++ .../linux/oxnas/patches-3.14/400-oxnas-nand.patch | >>>>> 28 ++ .../linux/oxnas/patches-3.14/500-oxnas-sata.patch | >>>>> 30 ++ .../linux/oxnas/patches-3.14/800-oxnas-ehci.patch | >>>>> 30 ++ .../linux/oxnas/patches-3.14/900-more-boards.patch | >>>>> 16 + 14 files changed, 844 insertions(+) create mode 100644 >>>>> target/linux/oxnas/config-3.14 create mode 100644 >>>>> target/linux/oxnas/patches-3.14/010-arm_introduce-dma-fiq-irq-broadcast.patch >>>>> >>>>> >>>>> >> >>>>> create mode 100644 >>>> target/linux/oxnas/patches-3.14/100-obtain-reset-controller-from-device-tree.patch >>>> >> >>>> create mode 100644 >>>>> target/linux/oxnas/patches-3.14/250-add-plxtech-vendor-prefix.patch >>>>> >>>>> >> >>>>> create mode 100644 >>>> target/linux/oxnas/patches-3.14/300-introduce-oxnas-platform.patch >> >>>> create mode 100644 >>>>> target/linux/oxnas/patches-3.14/310-oxnas-clocksource.patch >>>>> >>>>> create mode 100644 >>>>> target/linux/oxnas/patches-3.14/320-oxnas-irqchip.patch >>>>> create mode 100644 >>>>> target/linux/oxnas/patches-3.14/330-oxnas-pinctrl.patch >>>>> create mode 100644 >>>>> target/linux/oxnas/patches-3.14/340-oxnas-pcie.patch >>>>> create mode 100644 >>>>> target/linux/oxnas/patches-3.14/350-oxnas-reset.patch >>>>> create mode 100644 >>>>> target/linux/oxnas/patches-3.14/400-oxnas-nand.patch >>>>> create mode 100644 >>>>> target/linux/oxnas/patches-3.14/500-oxnas-sata.patch >>>>> create mode 100644 >>>>> target/linux/oxnas/patches-3.14/800-oxnas-ehci.patch create >>>>> mode 100644 >>>>> target/linux/oxnas/patches-3.14/900-more-boards.patch >>>>> >>>>> diff --git a/target/linux/oxnas/config-3.14 >>>>> b/target/linux/oxnas/config-3.14 new file mode 100644 index >>>>> 0000000..727d81e --- /dev/null +++ >>>>> b/target/linux/oxnas/config-3.14 @@ -0,0 +1,349 @@ >>>>> +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_APM_EMULATION is not set >>>>> +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y >>>>> +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y >>>>> +CONFIG_ARCH_HAS_RESET_CONTROLLER=y >>>>> +CONFIG_ARCH_HAS_TICK_BROADCAST=y >>>>> +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y >>>>> +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +# >>>>> CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set >>>>> +CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_OXNAS=y >>>>> +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# >>>>> CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# >>>>> CONFIG_ARCH_SPARSEMEM_DEFAULT is not set >>>>> +CONFIG_ARCH_SUSPEND_POSSIBLE=y >>>>> +CONFIG_ARCH_USE_BUILTIN_BSWAP=y >>>>> +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y >>>>> +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y >>>>> +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARM=y +# >>>>> CONFIG_ARM_CPU_SUSPEND is not set +CONFIG_ARM_GIC=y >>>>> +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_NR_BANKS=8 >>>>> +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_THUMB=y >>>>> +CONFIG_ARM_UNWIND=y +CONFIG_ATA=y +CONFIG_AUTO_ZRELADDR=y >>>>> +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_SD=y >>>>> +CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y >>>>> +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1 >>>>> +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y >>>>> +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 +# >>>>> CONFIG_CACHE_L2X0 is not set +CONFIG_CLKDEV_LOOKUP=y >>>>> +CONFIG_CLKSRC_MMIO=y +CONFIG_CLKSRC_OF=y >>>>> +CONFIG_CLKSRC_RPS_TIMER=y +CONFIG_CLONE_BACKWARDS=y >>>>> +CONFIG_CMDLINE="console=ttyS0,115200n8 >>>>> earlyprintk=serial" +CONFIG_COMMON_CLK=y >>>>> +CONFIG_COMPACTION=y +CONFIG_CONSOLE_POLL=y >>>>> +CONFIG_COREDUMP=y +CONFIG_CPU_32v6=y +CONFIG_CPU_32v6K=y >>>>> +CONFIG_CPU_ABRT_EV6=y +# CONFIG_CPU_BPREDICT_DISABLE is >>>>> not set +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y >>>>> +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y >>>>> +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_HAS_ASID=y +# >>>>> CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_IDLE=y >>>>> +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y >>>>> +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_PM=y +CONFIG_CPU_RMAP=y >>>>> +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_V6K=y +CONFIG_CRC16=y >>>>> +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_DEFLATE=y >>>>> +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y >>>>> +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_XZ=y >>>>> +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_LL=y >>>>> +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +# >>>>> CONFIG_DEBUG_LL_UART_8250 is not set >>>>> +CONFIG_DEBUG_LL_UART_NONE=y +# CONFIG_DEBUG_LL_UART_PL01X >>>>> is not set +# CONFIG_DEBUG_UART_8250 is not set +# >>>>> CONFIG_DEBUG_UART_PL01X is not set +# CONFIG_DEBUG_USER is >>>>> not set +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=8 >>>>> +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DIRECT_IO=y >>>>> +CONFIG_DMADEVICES=y +CONFIG_DMA_CACHE_FIQ_BROADCAST=y +# >>>>> CONFIG_DMA_CACHE_RWFO is not set +CONFIG_DMA_OF=y >>>>> +CONFIG_DNOTIFY=y +CONFIG_DTC=y +# CONFIG_DW_DMAC_CORE is >>>>> not set +# CONFIG_DW_DMAC_PCI is not set >>>>> +CONFIG_EARLY_PRINTK=y +CONFIG_EXT4_FS=y >>>>> +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y >>>>> +CONFIG_FIQ=y +CONFIG_FS_MBCACHE=y +CONFIG_FS_POSIX_ACL=y >>>>> +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y >>>>> +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y >>>>> +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y >>>>> +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IO=y >>>>> +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_NET_UTILS=y >>>>> +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PINCONF=y >>>>> +CONFIG_GENERIC_SCHED_CLOCK=y >>>>> +CONFIG_GENERIC_SMP_IDLE_THREAD=y >>>>> +CONFIG_GENERIC_STRNCPY_FROM_USER=y >>>>> +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GPIOLIB=y >>>>> +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_GENERIC=y >>>>> +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_SYSFS=y >>>>> +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y >>>>> +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# >>>>> CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set >>>>> +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y >>>>> +CONFIG_HAVE_ARCH_PFN_VALID=y >>>>> +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y >>>>> +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ARM_SCU=y >>>>> +CONFIG_HAVE_ARM_TWD=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is >>>>> not set +CONFIG_HAVE_BPF_JIT=y >>>>> +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y >>>>> +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y >>>>> +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y >>>>> +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y >>>>> +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y >>>>> +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y >>>>> +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y >>>>> +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y >>>>> +CONFIG_HAVE_FUNCTION_TRACER=y >>>>> +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y >>>>> +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y >>>>> +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZ4=y >>>>> +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y >>>>> +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_MEMBLOCK=y >>>>> +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y >>>>> +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y >>>>> +CONFIG_HAVE_PERF_REGS=y >>>>> +CONFIG_HAVE_PERF_USER_STACK_DUMP=y >>>>> +CONFIG_HAVE_PROC_CPU=y >>>>> +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y >>>>> +CONFIG_HAVE_SMP=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y >>>>> +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y >>>>> +CONFIG_HOTPLUG_CPU=y +CONFIG_HZ_FIXED=0 +CONFIG_I2C=y >>>>> +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_BOARDINFO=y >>>>> +CONFIG_ICPLUS_PHY=y +CONFIG_INET_DIAG=y +CONFIG_INET_LRO=y >>>>> +CONFIG_INET_TCP_DIAG=y +CONFIG_INET_UDP_DIAG=y >>>>> +CONFIG_INPUT=y +# CONFIG_INPUT_MISC is not set >>>>> +CONFIG_IOMMU_HELPER=y +CONFIG_IOMMU_SUPPORT=y +# >>>>> CONFIG_IP_ADVANCED_ROUTER is not set +# CONFIG_IP_MULTICAST >>>>> is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_BOOTP is not >>>>> set +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_RARP is not set >>>>> +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y >>>>> +CONFIG_IRQ_FORCED_THREADING=y >>>>> +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_IRQ_WORK=y +# >>>>> CONFIG_ISDN is not set +CONFIG_JBD2=y +# CONFIG_JFFS2_FS is >>>>> not set +CONFIG_JUMP_LABEL=y +CONFIG_KALLSYMS=y >>>>> +CONFIG_KALLSYMS_ALL=y +CONFIG_KGDB=y +# CONFIG_KGDB_KDB is >>>>> not set +CONFIG_KGDB_SERIAL_CONSOLE=y +# CONFIG_KGDB_TESTS >>>>> is not set +CONFIG_KTIME_SCALAR=y +# CONFIG_LDM_DEBUG is >>>>> not set +CONFIG_LDM_PARTITION=y +# CONFIG_LEDS_PWM is not >>>>> set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# >>>>> CONFIG_LEDS_TRIGGER_NETDEV is not set +# >>>>> CONFIG_LEDS_TRIGGER_TIMER is not set >>>>> +CONFIG_LOCKUP_DETECTOR=y +CONFIG_LZO_COMPRESS=y >>>>> +CONFIG_LZO_DECOMPRESS=y +CONFIG_MACH_OX820=y >>>>> +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAILBOX=y >>>>> +CONFIG_MDIO_BOARDINFO=y +CONFIG_MIGHT_HAVE_PCI=y >>>>> +CONFIG_MIGRATION=y +# CONFIG_MLX5_CORE is not set >>>>> +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MODULE_STRIPPED is >>>>> not set +# CONFIG_MTD_CFI is not set +# >>>>> CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_NAND=y >>>>> +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_OXNAS=y >>>>> +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_SM_COMMON is not >>>>> set +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_UBI=y >>>>> +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +# >>>>> CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI >>>>> is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 >>>>> +CONFIG_MTD_UIMAGE_SPLIT=y +CONFIG_MULTI_IRQ_HANDLER=y >>>>> +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NEED_DMA_MAP_STATE=y >>>>> +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_RX_BUSY_POLL=y >>>>> +CONFIG_NLS=y +CONFIG_NLS_UTF8=y +CONFIG_NO_BOOTMEM=y >>>>> +CONFIG_NO_HZ_COMMON=y +CONFIG_NO_HZ_IDLE=y >>>>> +CONFIG_NR_CPUS=2 +CONFIG_OF=y +CONFIG_OF_ADDRESS=y >>>>> +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y >>>>> +CONFIG_OF_GPIO=y +CONFIG_OF_IOMMU=y +CONFIG_OF_IRQ=y >>>>> +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y >>>>> +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y >>>>> +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y >>>>> +CONFIG_PACKET_DIAG=y +CONFIG_PAGEFLAGS_EXTENDED=y >>>>> +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PCI=y >>>>> +CONFIG_PCIEAER=y +CONFIG_PCIEASPM=y +# >>>>> CONFIG_PCIEASPM_DEBUG is not set +CONFIG_PCIEASPM_DEFAULT=y >>>>> +# CONFIG_PCIEASPM_PERFORMANCE is not set +# >>>>> CONFIG_PCIEASPM_POWERSAVE is not set +CONFIG_PCIEPORTBUS=y >>>>> +CONFIG_PCIE_PME=y +CONFIG_PCI_OXNAS=y >>>>> +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y >>>>> +CONFIG_PINCTRL=y +CONFIG_PINCTRL_OXNAS=y >>>>> +CONFIG_PLXTECH_RPS=y +CONFIG_PM=y +CONFIG_PM_CLK=y +# >>>>> CONFIG_PM_DEBUG is not set +CONFIG_PM_RUNTIME=y >>>>> +CONFIG_PPS=y +# CONFIG_PREEMPT_RCU is not set >>>>> +CONFIG_PRINTK_TIME=y +CONFIG_PROC_DEVICETREE=y >>>>> +CONFIG_PTP_1588_CLOCK=y +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y >>>>> +CONFIG_RCU_CPU_STALL_TIMEOUT=21 >>>>> +CONFIG_RCU_STALL_COMMON=y +CONFIG_REALTEK_PHY=y >>>>> +CONFIG_RELAY=y +CONFIG_RESET_CONTROLLER=y >>>>> +CONFIG_RESET_CONTROLLER_OXNAS=y +CONFIG_RFS_ACCEL=y >>>>> +CONFIG_RPS=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_DRV_CMOS is >>>>> not set +CONFIG_SATA_OXNAS=y +CONFIG_SCHED_HRTICK=y >>>>> +CONFIG_SCSI=y +CONFIG_SERIAL_8250_NR_UARTS=1 >>>>> +CONFIG_SERIAL_8250_PCI=y >>>>> +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# >>>>> CONFIG_SERIAL_KGDB_NMI is not set >>>>> +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SMP=y >>>>> +CONFIG_SMP_ON_UP=y +CONFIG_SOCK_DIAG=y +CONFIG_STMMAC_DA=y >>>>> +CONFIG_STMMAC_DEBUG_FS=y +CONFIG_STMMAC_ETH=y +# >>>>> CONFIG_STMMAC_PCI is not set +CONFIG_STMMAC_PLATFORM=y >>>>> +CONFIG_STOP_MACHINE=y +# CONFIG_STRIP_ASM_SYMS is not set >>>>> +CONFIG_SWIOTLB=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y >>>>> +CONFIG_TREE_RCU=y +CONFIG_UBIFS_FS=y +# >>>>> CONFIG_UBIFS_FS_ADVANCED_COMPR is not set >>>>> +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_XZ=y >>>>> +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UID16=y >>>>> +CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h" >>>>> +CONFIG_USB=y +CONFIG_USB_COMMON=y +# CONFIG_USB_EHCI_HCD >>>>> is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is >>>>> not set +CONFIG_USE_OF=y +CONFIG_VECTORS_BASE=0xffff0000 >>>>> +CONFIG_VEXPRESS_CONFIG=y +# CONFIG_VFP is not set >>>>> +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_WATCHDOG_CORE=y >>>>> +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_XPS=y >>>>> +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_BCJ=y >>>>> +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_ZBOOT_ROM_TEXT=0 +# >>>>> CONFIG_ZBUD is not set +CONFIG_ZLIB_DEFLATE=y >>>>> +CONFIG_ZLIB_INFLATE=y +CONFIG_ZONE_DMA_FLAG=0 diff --git >>>>> a/target/linux/oxnas/patches-3.14/010-arm_introduce-dma-fiq-irq-broadcast.patch >>>>> >>>>> >>>>> >> >>>>> b/target/linux/oxnas/patches-3.14/010-arm_introduce-dma-fiq-irq-broadcast.patch >>>>> >>>>> >>>> new file mode 100644 >>>>> index 0000000..ed01fe1 --- /dev/null +++ >>>>> b/target/linux/oxnas/patches-3.14/010-arm_introduce-dma-fiq-irq-broadcast.patch >>>>> >>>>> >>>>> >> >>>>> @@ -0,0 +1,62 @@ >>>>> +Index: linux-3.14.18/arch/arm/include/asm/glue-cache.h >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/arch/arm/include/asm/glue-cache.h >>>>> ++++ linux-3.14.18/arch/arm/include/asm/glue-cache.h +@@ >>>>> -156,11 +156,19 @@ extern inline void nop_dma_unmap_area(co >>>>> + #define __cpuc_flush_user_range >>>>> __glue(_CACHE,_flush_user_cache_range) + #define >>>>> __cpuc_coherent_kern_range >>>>> __glue(_CACHE,_coherent_kern_range) + #define >>>>> __cpuc_coherent_user_range >>>>> __glue(_CACHE,_coherent_user_range) ++#ifndef >>>>> CONFIG_DMA_CACHE_FIQ_BROADCAST + #define >>>>> __cpuc_flush_dcache_area >>>>> __glue(_CACHE,_flush_kern_dcache_area) + + #define >>>>> dmac_map_area __glue(_CACHE,_dma_map_area) + >>>>> #define dmac_unmap_area __glue(_CACHE,_dma_unmap_area) + >>>>> #define dmac_flush_range __glue(_CACHE,_dma_flush_range) >>>>> ++#else ++#define __cpuc_flush_dcache_area >>>>> __glue(fiq,_flush_kern_dcache_area) ++ ++#define >>>>> dmac_map_area __glue(fiq,_dma_map_area) >>>>> ++#define dmac_unmap_area __glue(fiq,_dma_unmap_area) >>>>> ++#define dmac_flush_range __glue(fiq,_dma_flush_range) >>>>> ++#endif /* CONFIG_DMA_CACHE_FIQ_BROADCAST */ + #endif + + >>>>> #endif +Index: linux-3.14.18/arch/arm/mm/Kconfig >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/arch/arm/mm/Kconfig >>>>> ++++ linux-3.14.18/arch/arm/mm/Kconfig +@@ -843,6 +843,17 >>>>> @@ config DMA_CACHE_RWFO + in hardware, other >>>>> workarounds are needed (e.g. cache + maintenance >>>>> broadcasting in software via FIQ). + ++config >>>>> DMA_CACHE_FIQ_BROADCAST ++ bool "Enable fiq broadcast DMA >>>>> cache maintenance" ++ depends on CPU_V6K && SMP ++ >>>>> select FIQ ++ help ++ The Snoop Control Unit on >>>>> ARM11MPCore does not detect the ++ cache maintenance >>>>> operations and the dma_{map,unmap}_area() ++ functions may >>>>> leave stale cache entries on other CPUs. By ++ enabling >>>>> this option, fiq broadcast in the ARMv6 ++ DMA cache >>>>> maintenance functions is performed. ++ + config OUTER_CACHE >>>>> + bool + +Index: linux-3.14.18/arch/arm/mm/flush.c >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/arch/arm/mm/flush.c >>>>> ++++ linux-3.14.18/arch/arm/mm/flush.c +@@ -291,7 +291,11 >>>>> @@ void flush_dcache_page(struct page *page + + mapping >>>>> = page_mapping(page); + ++#ifndef >>>>> CONFIG_DMA_CACHE_FIQ_BROADCAST + if >>>>> (!cache_ops_need_broadcast() && ++#else ++ if ( ++#endif >>>>> + mapping && !page_mapped(page)) + >>>>> clear_bit(PG_dcache_clean, &page->flags); + else { >>>>> diff --git >>>>> a/target/linux/oxnas/patches-3.14/100-obtain-reset-controller-from-device-tree.patch >>>>> >>>>> >>>>> >> >>>>> b/target/linux/oxnas/patches-3.14/100-obtain-reset-controller-from-device-tree.patch >>>>> >>>>> >>>> new file mode 100644 >>>>> index 0000000..3b3947c --- /dev/null +++ >>>>> b/target/linux/oxnas/patches-3.14/100-obtain-reset-controller-from-device-tree.patch >>>>> >>>>> >>>>> >> >>>>> @@ -0,0 +1,99 @@ >>>>> +Index: linux-3.13.7/drivers/reset/core.c >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.13.7.orig/drivers/reset/core.c >>>>> ++++ linux-3.13.7/drivers/reset/core.c +@@ -127,15 +127,16 >>>>> @@ int reset_control_deassert(struct reset_ + >>>>> EXPORT_SYMBOL_GPL(reset_control_deassert); + + /** +- * >>>>> reset_control_get - Lookup and obtain a reference to a >>>>> reset controller. +- * @dev: device to be reset by the >>>>> controller ++ * of_reset_control_get - Lookup and obtain a >>>>> reference to a reset controller. ++ * @node: device to be >>>>> reset by the controller + * @id: reset line name + * + * >>>>> Returns a struct reset_control or IS_ERR() condition >>>>> containing errno. + * + * Use of id names is optional. + >>>>> */ +-struct reset_control *reset_control_get(struct device >>>>> *dev, const char *id) ++struct reset_control >>>>> *of_reset_control_get(struct device_node *node, ++ >>>>> const char *id) + { + struct reset_control *rstc = >>>>> ERR_PTR(-EPROBE_DEFER); + struct reset_controller_dev >>>>> *r, *rcdev; +@@ -144,13 +145,10 @@ struct reset_control >>>>> *reset_control_get( + int rstc_id; + int ret; + +- >>>>> if (!dev) +- return ERR_PTR(-EINVAL); +- + if (id) >>>>> +- index = of_property_match_string(dev->of_node, ++ >>>>> index = of_property_match_string(node, + "reset-names", >>>>> id); +- ret = of_parse_phandle_with_args(dev->of_node, >>>>> "resets", "#reset-cells", ++ ret = >>>>> of_parse_phandle_with_args(node, "resets", "#reset-cells", >>>>> + index, &args); + if (ret) + >>>>> return ERR_PTR(ret); +@@ -185,12 +183,35 @@ struct >>>>> reset_control *reset_control_get( + return >>>>> ERR_PTR(-ENOMEM); + } + +- rstc->dev = dev; + >>>>> rstc->rcdev = rcdev; + rstc->id = rstc_id; + + return >>>>> rstc; + } ++EXPORT_SYMBOL_GPL(of_reset_control_get); ++ >>>>> ++/** ++ * reset_control_get - Lookup and obtain a >>>>> reference to a reset controller. ++ * @dev: device to be >>>>> reset by the controller ++ * @id: reset line name ++ * ++ * >>>>> Returns a struct reset_control or IS_ERR() condition >>>>> containing errno. ++ * ++ * Use of id names is optional. ++ >>>>> */ ++struct reset_control *reset_control_get(struct device >>>>> *dev, const char *id) ++{ ++ struct reset_control *rstc; ++ >>>>> ++ if (!dev) ++ return ERR_PTR(-EINVAL); ++ ++ >>>>> rstc = of_reset_control_get(dev->of_node, id); ++ if >>>>> (!IS_ERR(rstc)) ++ rstc->dev = dev; ++ ++ return rstc; >>>>> ++} + EXPORT_SYMBOL_GPL(reset_control_get); + + /** +Index: >>>>> linux-3.13.7/include/linux/reset.h >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.13.7.orig/include/linux/reset.h >>>>> ++++ linux-3.13.7/include/linux/reset.h +@@ -1,6 +1,8 @@ + >>>>> #ifndef _LINUX_RESET_H_ + #define _LINUX_RESET_H_ + >>>>> ++#include <linux/of.h> ++ + struct device; + struct >>>>> reset_control; + +@@ -8,6 +10,8 @@ int >>>>> reset_control_reset(struct reset_con + int >>>>> reset_control_assert(struct reset_control *rstc); + int >>>>> reset_control_deassert(struct reset_control *rstc); + >>>>> ++struct reset_control *of_reset_control_get(struct >>>>> device_node *node, ++ const char *id); + struct >>>>> reset_control *reset_control_get(struct device *dev, const >>>>> char *id); + void reset_control_put(struct reset_control >>>>> *rstc); + struct reset_control >>>>> *devm_reset_control_get(struct device *dev, const char >>>>> *id); diff --git >>>>> a/target/linux/oxnas/patches-3.14/250-add-plxtech-vendor-prefix.patch >>>>> >>>>> >> >>>>> b/target/linux/oxnas/patches-3.14/250-add-plxtech-vendor-prefix.patch >>>>> >>>> new file mode 100644 >>>>> index 0000000..c08754d --- /dev/null +++ >>>>> b/target/linux/oxnas/patches-3.14/250-add-plxtech-vendor-prefix.patch >>>>> >>>>> >> >>>>> @@ -0,0 +1,12 @@ >>>>> +Index: >>>>> linux-3.14.18/Documentation/devicetree/bindings/vendor-prefixes.txt >>>>> >>>>> >> >>>>> +=================================================================== >>>>> +--- >>>>> linux-3.14.18.orig/Documentation/devicetree/bindings/vendor-prefixes.txt >>>>> >>>>> >> >>>>> ++++ linux-3.14.18/Documentation/devicetree/bindings/vendor-prefixes.txt >>>>> +@@ -65,6 +65,7 @@ onnn ON Semiconductor Corp. + >>>>> panasonic Panasonic Corporation + phytec PHYTEC >>>>> Messtechnik GmbH + picochip Picochip Ltd ++plxtech PLX >>>>> Technology, Inc. + powervr PowerVR (deprecated, use img) >>>>> + qca Qualcomm Atheros, Inc. + qcom Qualcomm >>>>> Technologies, Inc diff --git >>>>> a/target/linux/oxnas/patches-3.14/300-introduce-oxnas-platform.patch >>>>> >>>>> >> >>>>> b/target/linux/oxnas/patches-3.14/300-introduce-oxnas-platform.patch >>>>> >>>> new file mode 100644 >>>>> index 0000000..b6e2efb --- /dev/null +++ >>>>> b/target/linux/oxnas/patches-3.14/300-introduce-oxnas-platform.patch >>>>> >>>>> >> >>>>> @@ -0,0 +1,79 @@ >>>>> +Index: linux-3.14.18/arch/arm/Kconfig >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/arch/arm/Kconfig >>>>> ++++ linux-3.14.18/arch/arm/Kconfig +@@ -367,6 +367,17 @@ >>>>> config ARCH_VERSATILE + help + This enables >>>>> support for ARM Ltd Versatile board. + ++config ARCH_OXNAS >>>>> ++ bool "Oxford Semiconductor 815/820/825 NAS SoC" ++ >>>>> select ARCH_REQUIRE_GPIOLIB ++ select CLKDEV_LOOKUP ++ >>>>> select GENERIC_CLOCKEVENTS ++ select COMMON_CLK ++ >>>>> select MIGHT_HAVE_PCI ++ select >>>>> ARCH_HAS_RESET_CONTROLLER ++ help ++ This enables >>>>> support for Oxsemi 815/820/825 NAS SoC ++ + config >>>>> ARCH_AT91 + bool "Atmel AT91" + select >>>>> ARCH_REQUIRE_GPIOLIB +@@ -999,6 +1010,8 @@ source >>>>> "arch/arm/mach-omap2/Kconfig" + + source >>>>> "arch/arm/mach-orion5x/Kconfig" + ++source >>>>> "arch/arm/mach-oxnas/Kconfig" ++ + source >>>>> "arch/arm/mach-picoxcell/Kconfig" + + source >>>>> "arch/arm/mach-pxa/Kconfig" +Index: >>>>> linux-3.14.18/arch/arm/Makefile >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/arch/arm/Makefile >>>>> ++++ linux-3.14.18/arch/arm/Makefile +@@ -183,6 +183,7 @@ >>>>> machine-$(CONFIG_ARCH_NSPIRE) += nspire + >>>>> machine-$(CONFIG_ARCH_OMAP1) += omap1 + >>>>> machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 + >>>>> machine-$(CONFIG_ARCH_ORION5X) += orion5x >>>>> ++machine-$(CONFIG_ARCH_OXNAS) += oxnas + >>>>> machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell + >>>>> machine-$(CONFIG_ARCH_PXA) += pxa + >>>>> machine-$(CONFIG_ARCH_REALVIEW) += realview +Index: >>>>> linux-3.14.18/arch/arm/boot/dts/Makefile >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/arch/arm/boot/dts/Makefile >>>>> ++++ linux-3.14.18/arch/arm/boot/dts/Makefile +@@ -233,6 >>>>> +233,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420 + >>>>> am43x-epos-evm.dtb \ + dra7-evm.dtb + >>>>> dtb-$(CONFIG_ARCH_ORION5X) += >>>>> orion5x-lacie-ethernet-disk-mini-v2.dtb >>>>> ++dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb + >>>>> dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb + >>>>> dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ + >>>>> ste-hrefprev60-stuib.dtb \ +Index: >>>>> linux-3.14.18/arch/arm/tools/mach-types >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/arch/arm/tools/mach-types >>>>> ++++ linux-3.14.18/arch/arm/tools/mach-types +@@ -228,6 >>>>> +228,7 @@ edb9302a MACH_EDB9302A EDB9302A >>>>> 1127 + edb9307a MACH_EDB9307A EDB9307A 1128 >>>>> + omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138 + >>>>> vstms MACH_VSTMS VSTMS 1140 ++ox820 >>>>> MACH_OX820 OX820 1152 + micro9m >>>>> MACH_MICRO9M MICRO9M 1169 + bug >>>>> MACH_BUG BUG 1179 + at91sam9263ek >>>>> MACH_AT91SAM9263EK AT91SAM9263EK 1202 +Index: >>>>> linux-3.14.18/drivers/clk/Makefile >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/clk/Makefile >>>>> ++++ linux-3.14.18/drivers/clk/Makefile +@@ -19,6 +19,7 @@ >>>>> obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1 + >>>>> obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o + >>>>> obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o + >>>>> obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o >>>>> ++obj-$(CONFIG_ARCH_OXNAS) += clk-oxnas.o + >>>>> obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o + >>>>> obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o + >>>>> obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o >>>>> diff --git >>>>> a/target/linux/oxnas/patches-3.14/310-oxnas-clocksource.patch >>>>> >>>>> b/target/linux/oxnas/patches-3.14/310-oxnas-clocksource.patch >>>>> >>>>> new file mode 100644 index 0000000..1eb74de --- /dev/null +++ >>>>> b/target/linux/oxnas/patches-3.14/310-oxnas-clocksource.patch >>>>> >>>>> @@ -0,0 +1,24 @@ +Index: >>>>> linux-3.14.18/drivers/clocksource/Kconfig >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/clocksource/Kconfig >>>>> ++++ linux-3.14.18/drivers/clocksource/Kconfig +@@ -140,3 >>>>> +140,9 @@ config VF_PIT_TIMER + bool + help + >>>>> Support for Period Interrupt Timer on Freescale Vybrid >>>>> Family SoCs. ++ ++config CLKSRC_RPS_TIMER ++ def_bool y >>>>> if ARCH_OXNAS ++ select CLKSRC_MMIO ++ help ++ >>>>> This option enables support for the oxnas rps timers. >>>>> +Index: linux-3.14.18/drivers/clocksource/Makefile >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/clocksource/Makefile >>>>> ++++ linux-3.14.18/drivers/clocksource/Makefile +@@ -37,3 >>>>> +37,5 @@ obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arc + >>>>> obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o >>>>> + obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o >>>>> + obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o >>>>> ++ ++obj-$(CONFIG_CLKSRC_RPS_TIMER) += >>>>> oxnas_rps_timer.o diff --git >>>>> a/target/linux/oxnas/patches-3.14/320-oxnas-irqchip.patch >>>>> b/target/linux/oxnas/patches-3.14/320-oxnas-irqchip.patch >>>>> new file mode 100644 index 0000000..6406a3f --- /dev/null >>>>> +++ >>>>> b/target/linux/oxnas/patches-3.14/320-oxnas-irqchip.patch >>>>> @@ -0,0 +1,40 @@ +Index: >>>>> linux-3.14.18/drivers/irqchip/Kconfig >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/irqchip/Kconfig >>>>> ++++ linux-3.14.18/drivers/irqchip/Kconfig +@@ -10,6 +10,11 >>>>> @@ config ARM_GIC + config GIC_NON_BANKED + bool + >>>>> ++config PLXTECH_RPS ++ def_bool y if ARHC_OXNAS ++ >>>>> depends on ARCH_OXNAS ++ select IRQ_DOMAIN ++ + config >>>>> ARM_NVIC + bool + select IRQ_DOMAIN +Index: >>>>> linux-3.14.18/drivers/irqchip/Makefile >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/irqchip/Makefile >>>>> ++++ linux-3.14.18/drivers/irqchip/Makefile +@@ -20,6 +20,7 >>>>> @@ obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc. + >>>>> obj-$(CONFIG_SIRF_IRQ) += irq-sirfsoc.o + >>>>> obj-$(CONFIG_RENESAS_INTC_IRQPIN) += >>>>> irq-renesas-intc-irqpin.o + obj-$(CONFIG_RENESAS_IRQC) += >>>>> irq-renesas-irqc.o ++obj-$(CONFIG_PLXTECH_RPS) += >>>>> irq-rps.o + obj-$(CONFIG_VERSATILE_FPGA_IRQ) += >>>>> irq-versatile-fpga.o + obj-$(CONFIG_ARCH_NSPIRE) += >>>>> irq-zevio.o + obj-$(CONFIG_ARCH_VT8500) += >>>>> irq-vt8500.o +Index: >>>>> linux-3.14.18/drivers/irqchip/irq-gic.c >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/irqchip/irq-gic.c >>>>> ++++ linux-3.14.18/drivers/irqchip/irq-gic.c +@@ -1015,6 >>>>> +1015,7 @@ IRQCHIP_DECLARE(gic_400, "arm,gic-400", + >>>>> IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", >>>>> gic_of_init); + IRQCHIP_DECLARE(cortex_a9_gic, >>>>> "arm,cortex-a9-gic", gic_of_init); + >>>>> IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", >>>>> gic_of_init); ++IRQCHIP_DECLARE(arm11_mpcore_gic, >>>>> "arm,arm11mp-gic", gic_of_init); + >>>>> IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", >>>>> gic_of_init); + IRQCHIP_DECLARE(msm_qgic2, >>>>> "qcom,msm-qgic2", gic_of_init); + diff --git >>>>> a/target/linux/oxnas/patches-3.14/330-oxnas-pinctrl.patch >>>>> b/target/linux/oxnas/patches-3.14/330-oxnas-pinctrl.patch >>>>> new file mode 100644 index 0000000..60caca3 --- /dev/null >>>>> +++ >>>>> b/target/linux/oxnas/patches-3.14/330-oxnas-pinctrl.patch >>>>> @@ -0,0 +1,32 @@ +Index: >>>>> linux-3.14.18/drivers/pinctrl/Kconfig >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/pinctrl/Kconfig >>>>> ++++ linux-3.14.18/drivers/pinctrl/Kconfig +@@ -87,6 +87,15 >>>>> @@ config PINCTRL_AT91 + help + Say Y here to >>>>> enable the at91 pinctrl driver + ++config PINCTRL_OXNAS ++ >>>>> bool "OXNAS pinctrl driver" ++ depends on OF ++ >>>>> depends on ARCH_OXNAS ++ select PINMUX ++ select >>>>> PINCONF ++ help ++ Say Y here to enable the oxnas >>>>> pinctrl driver ++ + config PINCTRL_BAYTRAIL + bool >>>>> "Intel Baytrail GPIO pin control" + depends on GPIOLIB && >>>>> ACPI && X86 +Index: linux-3.14.18/drivers/pinctrl/Makefile >>>>> >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/pinctrl/Makefile >>>>> ++++ linux-3.14.18/drivers/pinctrl/Makefile +@@ -67,6 +67,7 >>>>> @@ obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl- + >>>>> obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o + >>>>> obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o + >>>>> obj-$(CONFIG_PINCTRL_VF610) += pinctrl-vf610.o >>>>> ++obj-$(CONFIG_PINCTRL_OXNAS) += pinctrl-oxnas.o + + >>>>> obj-$(CONFIG_PLAT_ORION) += mvebu/ + >>>>> obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/ diff --git >>>>> a/target/linux/oxnas/patches-3.14/340-oxnas-pcie.patch >>>>> b/target/linux/oxnas/patches-3.14/340-oxnas-pcie.patch new >>>>> file mode 100644 index 0000000..ca0ccb8 --- /dev/null +++ >>>>> b/target/linux/oxnas/patches-3.14/340-oxnas-pcie.patch @@ >>>>> -0,0 +1,23 @@ +Index: >>>>> linux-3.14.18/drivers/pci/host/Kconfig >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/pci/host/Kconfig >>>>> ++++ linux-3.14.18/drivers/pci/host/Kconfig +@@ -33,4 +33,9 >>>>> @@ config PCI_RCAR_GEN2 + There are 3 internal PCI >>>>> controllers available with a single + built-in >>>>> EHCI/OHCI host controller present on each one. + ++config >>>>> PCI_OXNAS ++ bool "PLX Oxnas PCIe controller" ++ depends >>>>> on ARCH_OXNAS ++ select PCIEPORTBUS ++ + endmenu +Index: >>>>> linux-3.14.18/drivers/pci/host/Makefile >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/pci/host/Makefile >>>>> ++++ linux-3.14.18/drivers/pci/host/Makefile +@@ -4,3 +4,4 >>>>> @@ obj-$(CONFIG_PCI_IMX6) += pci-imx6.o + >>>>> obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o + >>>>> obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o + >>>>> obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o >>>>> ++obj-$(CONFIG_PCI_OXNAS) += pcie-oxnas.o diff --git >>>>> a/target/linux/oxnas/patches-3.14/350-oxnas-reset.patch >>>>> b/target/linux/oxnas/patches-3.14/350-oxnas-reset.patch >>>>> new file mode 100644 index 0000000..820d70b --- /dev/null >>>>> +++ b/target/linux/oxnas/patches-3.14/350-oxnas-reset.patch >>>>> @@ -0,0 +1,20 @@ +Index: >>>>> linux-3.14.18/drivers/reset/Kconfig >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/reset/Kconfig >>>>> ++++ linux-3.14.18/drivers/reset/Kconfig +@@ -11,3 +11,7 @@ >>>>> menuconfig RESET_CONTROLLER + via GPIOs or >>>>> SoC-internal reset controller modules. + + If unsure, >>>>> say no. ++ ++config RESET_CONTROLLER_OXNAS ++ bool ++ >>>>> select RESET_CONTROLLER +Index: >>>>> linux-3.14.18/drivers/reset/Makefile >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/reset/Makefile >>>>> ++++ linux-3.14.18/drivers/reset/Makefile +@@ -1,2 +1,3 @@ >>>>> + obj-$(CONFIG_RESET_CONTROLLER) += core.o >>>>> ++obj-$(CONFIG_RESET_CONTROLLER_OXNAS) += reset-ox820.o + >>>>> obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o diff --git >>>>> a/target/linux/oxnas/patches-3.14/400-oxnas-nand.patch >>>>> b/target/linux/oxnas/patches-3.14/400-oxnas-nand.patch new >>>>> file mode 100644 index 0000000..a5a1b02 --- /dev/null +++ >>>>> b/target/linux/oxnas/patches-3.14/400-oxnas-nand.patch @@ >>>>> -0,0 +1,28 @@ +Index: >>>>> linux-3.14.18/drivers/mtd/nand/Kconfig >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/mtd/nand/Kconfig >>>>> ++++ linux-3.14.18/drivers/mtd/nand/Kconfig +@@ -510,4 >>>>> +510,12 @@ config MTD_NAND_XWAY + Enables support for >>>>> NAND Flash chips on Lantiq XWAY SoCs. NAND is attached + >>>>> to the External Bus Unit (EBU). + ++config MTD_NAND_OXNAS >>>>> ++ tristate "Support for NAND on Plxtech NAS782X SoC" ++ >>>>> depends on ARCH_OXNAS ++ select MTD_NAND_PLATFORM ++ >>>>> help ++ Enables support for NAND Flash chips on >>>>> Plxtech NAS782X SoCs. NAND is attached ++ to the >>>>> STATIC Unit. ++ + endif # MTD_NAND +Index: >>>>> linux-3.14.18/drivers/mtd/nand/Makefile >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/mtd/nand/Makefile >>>>> ++++ linux-3.14.18/drivers/mtd/nand/Makefile +@@ -49,5 >>>>> +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740 + >>>>> obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ + >>>>> obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o + >>>>> obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ >>>>> ++obj-$(CONFIG_MTD_NAND_OXNAS) += oxnas_nand.o + + >>>>> nand-objs := nand_base.o nand_bbt.o diff --git >>>>> a/target/linux/oxnas/patches-3.14/500-oxnas-sata.patch >>>>> b/target/linux/oxnas/patches-3.14/500-oxnas-sata.patch new >>>>> file mode 100644 index 0000000..d203734 --- /dev/null +++ >>>>> b/target/linux/oxnas/patches-3.14/500-oxnas-sata.patch @@ >>>>> -0,0 +1,30 @@ +Index: linux-3.14.18/drivers/ata/Kconfig >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/ata/Kconfig >>>>> ++++ linux-3.14.18/drivers/ata/Kconfig +@@ -330,6 +330,13 >>>>> @@ config SATA_VITESSE + + If unsure, say N. + >>>>> ++config SATA_OXNAS ++ tristate "PLXTECH NAS782X SATA >>>>> support" ++ help ++ This option enables support for >>>>> Nas782x Serial ATA controller. ++ ++ If unsure, say N. >>>>> ++ + comment "PATA SFF controllers with BMDMA" + + config >>>>> PATA_ALI +Index: linux-3.14.18/drivers/ata/Makefile >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/ata/Makefile >>>>> ++++ linux-3.14.18/drivers/ata/Makefile +@@ -31,6 +31,7 @@ >>>>> obj-$(CONFIG_SATA_SVW) += sata_svw.o + >>>>> obj-$(CONFIG_SATA_ULI) += sata_uli.o + >>>>> obj-$(CONFIG_SATA_VIA) += sata_via.o + >>>>> obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o >>>>> ++obj-$(CONFIG_SATA_OXNAS) += sata_oxnas.o + + # SFF PATA >>>>> w/ BMDMA + obj-$(CONFIG_PATA_ALI) += pata_ali.o diff --git >>>>> a/target/linux/oxnas/patches-3.14/800-oxnas-ehci.patch >>>>> b/target/linux/oxnas/patches-3.14/800-oxnas-ehci.patch new >>>>> file mode 100644 index 0000000..94e62a9 --- /dev/null +++ >>>>> b/target/linux/oxnas/patches-3.14/800-oxnas-ehci.patch @@ >>>>> -0,0 +1,30 @@ +Index: >>>>> linux-3.14.18/drivers/usb/host/Kconfig >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/usb/host/Kconfig >>>>> ++++ linux-3.14.18/drivers/usb/host/Kconfig +@@ -273,6 >>>>> +273,13 @@ config USB_OCTEON_EHCI + USB 2.0 device >>>>> support. All CN6XXX based chips with USB are + >>>>> supported. + ++config USB_EHCI_OXNAS ++ tristate "OXNAS >>>>> EHCI Module" ++ depends on USB_EHCI_HCD && ARCH_OXNAS ++ >>>>> select USB_EHCI_ROOT_HUB_TT ++ ---help--- ++ Enable >>>>> support for the OX820 SOC's on-chip EHCI controller. ++ + >>>>> endif # USB_EHCI_HCD + + config USB_OXU210HP_HCD +Index: >>>>> linux-3.14.18/drivers/usb/host/Makefile >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/drivers/usb/host/Makefile >>>>> ++++ linux-3.14.18/drivers/usb/host/Makefile +@@ -37,6 >>>>> +37,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci- + >>>>> obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o + >>>>> obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o + >>>>> obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o >>>>> ++obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o + + >>>>> obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o + >>>>> obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o diff >>>>> --git >>>>> a/target/linux/oxnas/patches-3.14/900-more-boards.patch >>>>> b/target/linux/oxnas/patches-3.14/900-more-boards.patch >>>>> new file mode 100644 index 0000000..04bbfaa --- /dev/null >>>>> +++ b/target/linux/oxnas/patches-3.14/900-more-boards.patch >>>>> @@ -0,0 +1,16 @@ +Index: >>>>> linux-3.14.18/arch/arm/boot/dts/Makefile >>>>> +=================================================================== >>>>> >>>>> >> >>>>> +--- linux-3.14.18.orig/arch/arm/boot/dts/Makefile >>>>> ++++ linux-3.14.18/arch/arm/boot/dts/Makefile +@@ -233,7 >>>>> +233,10 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420 + >>>>> am43x-epos-evm.dtb \ + dra7-evm.dtb + >>>>> dtb-$(CONFIG_ARCH_ORION5X) += >>>>> orion5x-lacie-ethernet-disk-mini-v2.dtb >>>>> +-dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb >>>>> ++dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb \ ++ >>>>> ox820-pogoplug-v3.dtb \ ++ ox820-stg212.dtb \ ++ >>>>> ox820-kd20.dtb + dtb-$(CONFIG_ARCH_PRIMA2) += >>>>> prima2-evb.dtb + dtb-$(CONFIG_ARCH_U8500) += >>>>> ste-snowball.dtb \ + ste-hrefprev60-stuib.dtb \ >>>>> >>>> _______________________________________________ >>>> openwrt-devel mailing list openwrt-devel@lists.openwrt.org >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>> >>> >>>> _______________________________________________ openwrt-devel >>> mailing list openwrt-devel@lists.openwrt.org >>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>> >> >>> _______________________________________________ >> openwrt-devel mailing list openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> > > > > _______________________________________________ openwrt-devel > mailing list openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
