On Mon, Dec 08, 2014 at 11:13:07AM -0700, David Hutchison wrote:
>
> root@OpenWrt:/dev# ifconfig eth0
> eth0 Link encap:Ethernet HWaddr 4C:5E:0C:6D:24:43
> inet addr:10.128.41.249 Bcast:10.128.41.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:144 errors:0 dropped:0 overruns:0 frame:0
> TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:8996 (8.7 KiB) TX bytes:1292 (1.2 KiB)
> Interrupt:4
>
If it's of any use/interest my rb-2011uias-2hnd gives the following
MAC addresses:-
br-lan Link encap:Ethernet HWaddr 4C:5E:0C:73:87:3E
eth0 Link encap:Ethernet HWaddr 4C:5E:0C:73:87:3E
eth0.1 Link encap:Ethernet HWaddr 4C:5E:0C:73:87:3E
eth0.2 Link encap:Ethernet HWaddr 4C:5E:0C:73:87:3E
eth0.3 Link encap:Ethernet HWaddr 4C:5E:0C:73:87:3E
eth1 Link encap:Ethernet HWaddr 4C:5E:0C:73:87:43
Oddly it's eth1, the 10/100 fast ethernet switch built into the
processor that works and eth0 the Gigabit switch that doesn't work.
Running an ARP scan from another computer on the LAN shows the
mikrotik (192.168.1.40) as follows:-
192.168.1.40 mikrotik 4C:5E:0C:73:87:3E (Unknown)
--
Chris Green
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
