... and i assume this is already en-route to upstream ?
On 12/12/2014 17:07, Daniel Golle wrote:
> This adds a LED trigger for each SATA port if the kernel config
> option CONFIG_ATA_LEDS is set. In order not to cause any oldconfig
> confusion on targets, the option depends on
> CONFIG_ARCH_WANTS_LIBATA_LEDS, so target maintainers have to opt-in
> in order to use this (it could e.g. be useful on kirkwood, orion,
> ...)
>
> Signed-off-by: Daniel Golle <dan...@makrotopia.org>
>
> --- .../generic/patches-3.14/834-ledtrig-libata.patch | 147
> +++++++++++++++++++++
> .../generic/patches-3.18/834-ledtrig-libata.patch | 147
> +++++++++++++++++++++ 2 files changed, 294 insertions(+) create
> mode 100644
> target/linux/generic/patches-3.14/834-ledtrig-libata.patch create
> mode 100644
> target/linux/generic/patches-3.18/834-ledtrig-libata.patch
>
> diff --git
> a/target/linux/generic/patches-3.14/834-ledtrig-libata.patch
> b/target/linux/generic/patches-3.14/834-ledtrig-libata.patch new
> file mode 100644 index 0000000..a09cb0a --- /dev/null +++
> b/target/linux/generic/patches-3.14/834-ledtrig-libata.patch @@
> -0,0 +1,147 @@ +From c187610266765d05975a1d44cb3f6f0b81fee324 Mon
> Sep 17 00:00:00 2001 +From: Daniel Golle <dan...@makrotopia.org>
> +Date: Fri, 12 Dec 2014 13:38:33 +0100 +Subject: [PATCH] libata:
> add ledtrig support + +Signed-off-by: Daniel Golle
> <dan...@makrotopia.org> +--- + drivers/ata/Kconfig | 15
> +++++++++++++++ + drivers/ata/libata-core.c | 39
> +++++++++++++++++++++++++++++++++++++++ + include/linux/libata.h
> | 9 +++++++++ + 3 files changed, 63 insertions(+) + +diff --git
> a/drivers/ata/Kconfig b/drivers/ata/Kconfig +index cd4cccb..3a92107
> 100644 +--- a/drivers/ata/Kconfig ++++ b/drivers/ata/Kconfig +@@
> -46,6 +46,21 @@ config ATA_VERBOSE_ERROR + + If unsure, say Y. +
> ++config ARCH_WANT_LIBATA_LEDS ++ bool ++ ++config ATA_LEDS ++
> bool "support ATA port LED triggers" ++ depends on
> ARCH_WANT_LIBATA_LEDS ++ select NEW_LEDS ++ select LEDS_CLASS ++
> select LEDS_TRIGGERS ++ default y ++ help ++ This option adds a
> LED trigger for each registered ATA port. ++ It is used to drive
> disk activity leds connected via GPIO. ++ ++ + config ATA_ACPI +
> bool "ATA ACPI Support" + depends on ACPI && PCI +diff --git
> a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c +index
> c5ba15a..bf97099 100644 +--- a/drivers/ata/libata-core.c ++++
> b/drivers/ata/libata-core.c +@@ -725,6 +725,17 @@ u64
> ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
> + return block; + } + ++#ifdef CONFIG_ATA_LEDS ++#define
> LIBATA_BLINK_DELAY 20 /* ms */ ++static inline void
> ata_led_act(struct ata_port *ap) ++{ ++ unsigned long led_delay =
> LIBATA_BLINK_DELAY; ++ if (likely(!ap->ledtrig)) ++ return;
> ++
> led_trigger_blink_oneshot(ap->ledtrig, &led_delay, &led_delay, 0);
> ++} ++#endif ++ + /** + * ata_build_rw_tf - Build ATA taskfile for
> given read/write request + * @tf: Target ATA taskfile +@@ -4753,6
> +4764,9 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port
> *ap) + break; + } + } ++#ifdef
> CONFIG_ATA_LEDS ++
> ata_led_act(ap); ++#endif + + return qc; + } +@@ -5663,6 +5677,9
> @@ struct ata_port *ata_port_alloc(struct ata_host *host) +
> ap->stats.unhandled_irq = 1; + ap->stats.idle_irq = 1; + #endif
> ++#ifdef CONFIG_ATA_LEDS ++ ap->ledtrig = kzalloc(sizeof(struct
> led_trigger), GFP_KERNEL); ++#endif + ata_sff_port_init(ap); + +
> return ap; +@@ -5684,6 +5701,12 @@ static void
> ata_host_release(struct device *gendev, void *res) + +
> kfree(ap->pmp_link); + kfree(ap->slave_link); ++#ifdef
> CONFIG_ATA_LEDS ++ if (ap->ledtrig) { ++
> led_trigger_unregister(ap->ledtrig); ++
> kfree(ap->ledtrig); ++
> }; ++#endif + kfree(ap); + host->ports[i] = NULL;
> + } +@@
> -6130,7 +6153,23 @@ int ata_host_register(struct ata_host *host,
> struct scsi_host_template *sht) + host->ports[i]->print_id =
> atomic_inc_return(&ata_print_id); + host->ports[i]->local_port_no
> = i + 1; + } ++#ifdef CONFIG_ATA_LEDS ++ for (i = 0; i <
> host->n_ports; i++) { ++ if (unlikely(!host->ports[i]->ledtrig))
> ++ continue; ++ ++
> snprintf(host->ports[i]->ledtrig_name, ++
> sizeof(host->ports[i]->ledtrig_name), "ata%u", ++
> host->ports[i]->print_id); ++ ++ host->ports[i]->ledtrig->name =
> host->ports[i]->ledtrig_name; + ++ if
> (led_trigger_register(host->ports[i]->ledtrig)) { ++
> kfree(host->ports[i]->ledtrig); ++ host->ports[i]->ledtrig
> =
> NULL; ++ } ++ } ++#endif + /* Create associated sysfs
> transport
> objects */ + for (i = 0; i < host->n_ports; i++) { +
> rc =
> ata_tport_add(host->dev,host->ports[i]); +diff --git
> a/include/linux/libata.h b/include/linux/libata.h +index
> bd5fefe..9848876 100644 +--- a/include/linux/libata.h ++++
> b/include/linux/libata.h +@@ -38,6 +38,9 @@ + #include
> <linux/acpi.h> + #include <linux/cdrom.h> + #include
> <linux/sched.h> ++#ifdef CONFIG_ATA_LEDS ++#include <linux/leds.h>
> ++#endif + + /* + * Define if arch has non-standard setup. This
> is a _PCI_ standard +@@ -861,6 +864,12 @@ struct ata_port { +
> #ifdef CONFIG_ATA_ACPI + struct ata_acpi_gtm __acpi_init_gtm; /*
> use ata_acpi_init_gtm() */ + #endif ++ ++#ifdef CONFIG_ATA_LEDS ++
> struct led_trigger *ledtrig; ++ char
> ledtrig_name[8]; ++#endif
> ++ + /* owned by EH */ + u8
> sector_buf[ATA_SECT_SIZE]
> ____cacheline_aligned; + }; +-- +2.1.3 + diff --git
> a/target/linux/generic/patches-3.18/834-ledtrig-libata.patch
> b/target/linux/generic/patches-3.18/834-ledtrig-libata.patch new
> file mode 100644 index 0000000..a09cb0a --- /dev/null +++
> b/target/linux/generic/patches-3.18/834-ledtrig-libata.patch @@
> -0,0 +1,147 @@ +From c187610266765d05975a1d44cb3f6f0b81fee324 Mon
> Sep 17 00:00:00 2001 +From: Daniel Golle <dan...@makrotopia.org>
> +Date: Fri, 12 Dec 2014 13:38:33 +0100 +Subject: [PATCH] libata:
> add ledtrig support + +Signed-off-by: Daniel Golle
> <dan...@makrotopia.org> +--- + drivers/ata/Kconfig | 15
> +++++++++++++++ + drivers/ata/libata-core.c | 39
> +++++++++++++++++++++++++++++++++++++++ + include/linux/libata.h
> | 9 +++++++++ + 3 files changed, 63 insertions(+) + +diff --git
> a/drivers/ata/Kconfig b/drivers/ata/Kconfig +index cd4cccb..3a92107
> 100644 +--- a/drivers/ata/Kconfig ++++ b/drivers/ata/Kconfig +@@
> -46,6 +46,21 @@ config ATA_VERBOSE_ERROR + + If unsure, say Y. +
> ++config ARCH_WANT_LIBATA_LEDS ++ bool ++ ++config ATA_LEDS ++
> bool "support ATA port LED triggers" ++ depends on
> ARCH_WANT_LIBATA_LEDS ++ select NEW_LEDS ++ select LEDS_CLASS ++
> select LEDS_TRIGGERS ++ default y ++ help ++ This option adds a
> LED trigger for each registered ATA port. ++ It is used to drive
> disk activity leds connected via GPIO. ++ ++ + config ATA_ACPI +
> bool "ATA ACPI Support" + depends on ACPI && PCI +diff --git
> a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c +index
> c5ba15a..bf97099 100644 +--- a/drivers/ata/libata-core.c ++++
> b/drivers/ata/libata-core.c +@@ -725,6 +725,17 @@ u64
> ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
> + return block; + } + ++#ifdef CONFIG_ATA_LEDS ++#define
> LIBATA_BLINK_DELAY 20 /* ms */ ++static inline void
> ata_led_act(struct ata_port *ap) ++{ ++ unsigned long led_delay =
> LIBATA_BLINK_DELAY; ++ if (likely(!ap->ledtrig)) ++ return;
> ++
> led_trigger_blink_oneshot(ap->ledtrig, &led_delay, &led_delay, 0);
> ++} ++#endif ++ + /** + * ata_build_rw_tf - Build ATA taskfile for
> given read/write request + * @tf: Target ATA taskfile +@@ -4753,6
> +4764,9 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port
> *ap) + break; + } + } ++#ifdef
> CONFIG_ATA_LEDS ++
> ata_led_act(ap); ++#endif + + return qc; + } +@@ -5663,6 +5677,9
> @@ struct ata_port *ata_port_alloc(struct ata_host *host) +
> ap->stats.unhandled_irq = 1; + ap->stats.idle_irq = 1; + #endif
> ++#ifdef CONFIG_ATA_LEDS ++ ap->ledtrig = kzalloc(sizeof(struct
> led_trigger), GFP_KERNEL); ++#endif + ata_sff_port_init(ap); + +
> return ap; +@@ -5684,6 +5701,12 @@ static void
> ata_host_release(struct device *gendev, void *res) + +
> kfree(ap->pmp_link); + kfree(ap->slave_link); ++#ifdef
> CONFIG_ATA_LEDS ++ if (ap->ledtrig) { ++
> led_trigger_unregister(ap->ledtrig); ++
> kfree(ap->ledtrig); ++
> }; ++#endif + kfree(ap); + host->ports[i] = NULL;
> + } +@@
> -6130,7 +6153,23 @@ int ata_host_register(struct ata_host *host,
> struct scsi_host_template *sht) + host->ports[i]->print_id =
> atomic_inc_return(&ata_print_id); + host->ports[i]->local_port_no
> = i + 1; + } ++#ifdef CONFIG_ATA_LEDS ++ for (i = 0; i <
> host->n_ports; i++) { ++ if (unlikely(!host->ports[i]->ledtrig))
> ++ continue; ++ ++
> snprintf(host->ports[i]->ledtrig_name, ++
> sizeof(host->ports[i]->ledtrig_name), "ata%u", ++
> host->ports[i]->print_id); ++ ++ host->ports[i]->ledtrig->name =
> host->ports[i]->ledtrig_name; + ++ if
> (led_trigger_register(host->ports[i]->ledtrig)) { ++
> kfree(host->ports[i]->ledtrig); ++ host->ports[i]->ledtrig
> =
> NULL; ++ } ++ } ++#endif + /* Create associated sysfs
> transport
> objects */ + for (i = 0; i < host->n_ports; i++) { +
> rc =
> ata_tport_add(host->dev,host->ports[i]); +diff --git
> a/include/linux/libata.h b/include/linux/libata.h +index
> bd5fefe..9848876 100644 +--- a/include/linux/libata.h ++++
> b/include/linux/libata.h +@@ -38,6 +38,9 @@ + #include
> <linux/acpi.h> + #include <linux/cdrom.h> + #include
> <linux/sched.h> ++#ifdef CONFIG_ATA_LEDS ++#include <linux/leds.h>
> ++#endif + + /* + * Define if arch has non-standard setup. This
> is a _PCI_ standard +@@ -861,6 +864,12 @@ struct ata_port { +
> #ifdef CONFIG_ATA_ACPI + struct ata_acpi_gtm __acpi_init_gtm; /*
> use ata_acpi_init_gtm() */ + #endif ++ ++#ifdef CONFIG_ATA_LEDS ++
> struct led_trigger *ledtrig; ++ char
> ledtrig_name[8]; ++#endif
> ++ + /* owned by EH */ + u8
> sector_buf[ATA_SECT_SIZE]
> ____cacheline_aligned; + }; +-- +2.1.3 +
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
