On Sat, Dec 13, 2014 at 09:01:09AM +0100, John Crispin wrote: > Hi, > > On 10/12/2014 22:33, Chris Green wrote: > > On Wed, Dec 10, 2014 at 01:40:42PM -0700, Davey Hutchison wrote: > >> Fix pll_1000 value for eth0. Traffic would not flow from the eth0 > >> interface. > >> The new PLL enables delay, use ath79_setup_ar934x_eth_cfg to also enable > >> AR934X_ETH_CFG_RXD_DELAY. > >> > >> Signed-off-by: Davey Hutchison <dhutchi...@bluemesh.net> > >> > >> --- target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c > >> +++ target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c > >> @@ -199,6 +199,7 @@ > >> return; > >> > >> ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | > >> + AR934X_ETH_CFG_RXD_DELAY | > >> AR934X_ETH_CFG_SW_ONLY_MODE); > >> > >> ath79_register_mdio(0, 0x0); > >> @@ -209,6 +210,7 @@ > >> ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); > >> ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; > >> ath79_eth0_data.phy_mask = BIT(0); > >> + ath79_eth0_pll_data.pll_1000 = 0x3e000000; > >> > >> ath79_register_eth(0); > > > > This needs to be in mach-rb2011.c as well. > > > > > i will hopefully get round to looking at this today. first i could not > find my rs232 usb keyspan thingy, then i failed to find the poe injector .. > > do these board have uboot ? if so the easiest way would be to enter > uboot, start a tftp to make sure the network is configured and then use > the md command to display the relevant register. > I'm using the COM port on my PC (yes, it has a real one!) to do things to my rb-2011uias-2hnd. It took me w while to produce a correctly wired DB-9 to RJ-45 cable but I managed in the end.
By 'uboot' do you mean the ability to change boot source etc. by hitting a key on reboot? This is what I'm doing to load openwrite. Reboot the rb-2011uias-2hnd, hit a key on the serial port and then tell it to boot from ethernet using tftp. It's pretty straightforward. I can probably submit a patch for mach-rb2011.c parallelling the above one this week-end. -- Chris Green _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel