On Mon, 2015-01-19 at 11:51 +0000, Conor O'Gorman wrote: > On 19/01/15 10:46, Ben Mulvihill wrote: > > Hello, > > > > I am trying to build uboot-lantiq for the BT Home Hub 3A (lantiq > > ar9), and am wondering where to initialise the cgu, in the case > > of a ramboot image for uart booting. Normally the cgu is initialised > > in lowlevel_init, but that code is bypassed in ramboot images. The > > result is that the board boots with the wrong cgu settings, which > > sends the console haywire. So far I have tried two solutions: > > Another option is to try and not change anything. The console is already > configured and running. The ram does need config. > > I was used to seeing the ramboot version running at half clock speed, at > least on danube, previous to ar9. > > Conor
Hi Conor, Thanks for the reply. But with the latest uboot-lantiq, not changing anything means that I don't get a usable console. With an older version I do at least get a uboot console, but no linux console when I boot openwrt. Correcting the cgu settings solves both problems. Ben _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
