Date: Sun, 01 Mar 2015 00:09:59 +0100
From: dani <dgcb...@gmail.com>
To: openwrt-devel@lists.openwrt.org, j...@openwrt.org
Subject: Re: [OpenWrt-Devel] [PATCH][bcm63xx]: Add DGND3700 v1 / DGND3800B
support
Ok, patch updated with latest changes in trunk, and suggestions.
About SPROM fixups, I misundertsood its purpouse. Deleted since it's not
required.
Signed-off-by: Daniel Gonzalez <dgcb...@gmail.com>
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
index 854b3b2..69d797e 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
@@ -14,6 +14,14 @@ case "$board_name" in
96328dg2x2)
ucidef_set_led_usbdev "usb" "USB" "A4001N:green:usb" "1-1"
;;
+DGND3700v1_3800B)
+ ucidef_set_led_netdev "lan" "LAN" "DGND3700v1_3800B:green:lan" "eth0.1"
+ ucidef_set_led_netdev "wan" "WAN" "DGND3700v1_3800B:green:inet" "eth0.2"
+ ucidef_set_led_netdev "wlan0" "WIFI2G" "DGND3700v1_3800B:green:wifi2g"
"wlan0"
+ ucidef_set_led_netdev "wlan1" "WIFI5G" "DGND3700v1_3800B:blue:wifi5g"
"wlan1"
+ ucidef_set_led_usbdev "usb1" "USB1" "DGND3700v1_3800B:green:usb-back"
"1-1"
+ ucidef_set_led_usbdev "usb2" "USB2" "DGND3700v1_3800B:green:usb-front"
"1-2"
+ ;;
'F@ST2704V2')
ucidef_set_led_usbdev "usb" "USB" "F@ST2704V2:green:usb" "1-1"
;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index 709a1c8..6b9736a 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -108,6 +108,13 @@ P870HW-51a_v2)
ucidef_add_switch_vlan "eth0" "2" "4 5t"
;;
+DGND3700v1_3800B)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "eth0" "1" "1"
+ ucidef_add_switch_vlan "eth0" "1" "1 2 3 4 8t"
+ ucidef_add_switch_vlan "eth0" "2" "0 8t"
+ ;;
+
NB6)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 58ce71e..53dd759 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -111,6 +111,13 @@ brcm63xx_detect() {
brcm63xx_has_reset_button="true"
ifname=eth0
;;
+
+ DGND3700v1_3800B)
+ status_led="DGND3700v1_3800B:green:power"
+ brcm63xx_has_reset_button="true"
+ ifname="eth0"
+ ;;
+
"F@ST2504n")
status_led="fast2504n:green:ok"
brcm63xx_has_reset_button="true"
diff --git a/target/linux/brcm63xx/image/Makefile
b/target/linux/brcm63xx/image/Makefile
index dd16355..3fb9b1c 100755
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -111,6 +111,12 @@ define Image/Build/HCSDTB
--output_file=$(BIN_DIR)/openwrt-$(2)-$(1).bin
endef
+define Image/Build/ChkDTB
+ # Generate Netgear factory image
+ $(STAGING_DIR_HOST)/bin/mkchkimg -o
$(BIN_DIR)/openwrt-$(2)-$(1)-factory.chk \
+ -k $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin -b $(5) -r $(6)
+endef
+
define Build/Clean
$(MAKE) -C lzma-loader clean
endef
@@ -303,6 +309,12 @@ $(eval $(call
ImageDTB,RedBootDTB,Livebox,livebox,livebox-blue-5g))
$(eval $(call ImageDTB,HCSDTB,CVG834G,,cvg834g,a020,0001,0022,vmlinux-cvg834g))
# Netgear DG834GT/PN
$(eval $(call ImageDTB,CFEDTB,DG834GTPN,DG834GT_PN,dg834gtpn,96348GW-10,6348))
+# Netgear DGND3700 v1 / DGND3800B
+$(eval $(call
ImageDTB,CFEDTB,DGND3700v1_3800B,DGND3700v1_3800B,dgnd3700v1,96368MVWG,6368,--image-offset
0x20000 --block-size 0x20000))
+#Netgear DGND3700 v1 factory firmware
+$(eval $(call
ImageDTB,ChkDTB,DGND3700v1_3800B,DGND3700v1,,DGND3700v1_3800B,U12L144T01_NETGEAR_NEWLED,1))
+#Netgear DGND3800B factory firmware
+$(eval $(call
ImageDTB,ChkDTB,DGND3700v1_3800B,DGND3800B,,DGND3700v1_3800B,U12L144T11_NETGEAR_NEWLED,1))
# Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
$(eval $(call ImageDTB,CFEDTB,AGPF_S0,AGV2+W,agpf-s0,AGPF-S0,6358,--block-size
0x20000 --image-offset 0x20000 --signature2 IMAGE --tag-version 8))
# Pirelli A226G
diff --git a/target/linux/brcm63xx/profiles/netgear.mk
b/target/linux/brcm63xx/profiles/netgear.mk
index 75ddab5..20224a2 100644
--- a/target/linux/brcm63xx/profiles/netgear.mk
+++ b/target/linux/brcm63xx/profiles/netgear.mk
@@ -12,7 +12,6 @@ endef
define Profile/CVG834G/Description
Package set optimized for CVG834G.
endef
-
$(eval $(call Profile,CVG834G))
define Profile/DG834GTPN
@@ -23,3 +22,13 @@ define Profile/DG834GTPN/Description
Package set optimized for DG834GT/PN.
endef
$(eval $(call Profile,DG834GTPN))
+
+define Profile/DGND3700v1_3800B
+ NAME:=Netgear DGND3700 v1 / DGND3800B
+ PACKAGES:=kmod-b43 wpad-mini \
+ kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev
+endef
+define Profile/DGND3700v1_3800B/Description
+ Package set optimized for DGND3700 v1 / DGND3800B.
+endef
+$(eval $(call Profile,DGND3700v1_3800B))
diff --git a/target/linux/brcm63xx/dts/dgnd3700v1.dts
b/target/linux/brcm63xx/dts/dgnd3700v1.dts
new file mode 100644
index 0000000..65fae44
--- /dev/null
+++ b/target/linux/brcm63xx/dts/dgnd3700v1.dts
@@ -0,0 +1,110 @@
+/dts-v1/;
+
+/include/ "bcm6368.dtsi"
+
+/ {
+ model = "Netgear DGND3700v1/DGND3800B";
+ compatible = "netgear,dgnd3700v1", "brcm,bcm6368";
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ debounce-interval = <60>;
+
+ wlan {
+ label = "wlan";
+ gpios = <&gpio0 10 1>;
+ linux,code = <0xee>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio0 12 1>;
+ linux,code = <0x198>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio1 3 1>;
+ linux,code = <0x211>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ dsl_green {
+ label = "DGND3700v1_3800B:green:dsl";
+ gpios = <&gpio0 2 1>;
+ };
+ inet_red {
+ label = "DGND3700v1_3800B:red:inet";
+ gpios = <&gpio0 4 1>;
+ };
+ inet_green {
+ label = "DGND3700v1_3800B:green:inet";
+ gpios = <&gpio0 5 1>;
+ };
+ wps_green {
+ label = "DGND3700v1_3800B:green:wps";
+ gpios = <&gpio0 11 1>;
+ };
+ usbfront_green {
+ label = "DGND3700v1_3800B:green:usb-front";
+ gpios = <&gpio0 13 1>;
+ };
+ usbback_green {
+ label = "DGND3700v1_3800B:green:usb-back";
+ gpios = <&gpio0 14 1>;
+ };
+ power_red {
+ label = "DGND3700v1_3800B:red:power";
+ gpios = <&gpio0 22 1>;
+ };
+ lan_green {
+ label = "DGND3700v1_3800B:green:lan";
+ gpios = <&gpio0 23 1>;
+ };
+ power_green {
+ label = "DGND3700v1_3800B:green:power";
+ gpios = <&gpio0 24 1>;
+ default-state = "on";
+ };
+ wifi2g_green {
+ label = "DGND3700v1_3800B:green:wifi2g";
+ gpios = <&gpio0 26 1>;
+ };
+ wifi5g_blue {
+ label = "DGND3700v1_3800B:blue:wifi5g";
+ gpios = <&gpio0 27 1>;
+ };
+ };
+};
+
+&pflash {
+ status = "ok";
+
+ linux,part-probe = "bcm63xxpart";
+
+ cfe@0 {
+ label = "CFE";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ linux@20000 {
+ label = "linux";
+ reg = <0x020000 0x1e20000>;
+ };
+
+ board_data@1e40000 {
+ label = "board_data";
+ reg = <0x1e40000 0x1a0000>;
+ read-only;
+ };
+
+ nvram@1fe0000 {
+ label = "nvram";
+ reg = <0x1fe0000 0x20000>;
+ };
+};
diff --git
a/target/linux/brcm63xx/patches-3.14/568-board_DGND3700v1_3800B.patch
b/target/linux/brcm63xx/patches-3.14/568-board_DGND3700v1_3800B.patch
new file mode 100644
index 0000000..b4013bb
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/568-board_DGND3700v1_3800B.patch
@@ -0,0 +1,67 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2132,6 +2132,48 @@
+ .has_ehci0 = 1,
+ };
+
++static struct b53_platform_data DGND3700v1_3800B_b53_pdata = {
++ .alias = "eth0",
++};
++
++static struct spi_board_info DGND3700v1_3800B_spi_devices[] = {
++ {
++ .modalias = "b53-switch",
++ .max_speed_hz = 781000,
++ .bus_num = 0,
++ .chip_select = 1,
++ .platform_data = &DGND3700v1_3800B_b53_pdata,
++ }
++};
++
++static struct board_info __initdata board_DGND3700v1_3800B = {
++ .name = "DGND3700v1_3800B",
++ .expected_cpu_id = 0x6368,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [5] = {
++ .used = 1,
++ .phy_id = 0xff,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .name = "RGMII",
++ },
++ },
++ },
++
++ .spis = DGND3700v1_3800B_spi_devices,
++ .num_spis = ARRAY_SIZE(DGND3700v1_3800B_spi_devices),
++};
++
+ static struct sprom_fixup __initdata vr3025u_fixups[] = {
+ { .offset = 97, .value = 0xfeb3 },
+ { .offset = 98, .value = 0x1618 },
+@@ -2723,6 +2765,7 @@
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ &board_96368mvwg,
+ &board_96368mvngr,
++ &board_DGND3700v1_3800B,
+ &board_P870HW51A_V2,
+ &board_VR3025u,
+ &board_VR3025un,
+@@ -2813,6 +2856,7 @@
+ { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+ { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+ { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
++ { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B,
},
+ { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
diff --git
a/target/linux/brcm63xx/patches-3.18/568-board_DGND3700v1_3800B.patch
b/target/linux/brcm63xx/patches-3.18/568-board_DGND3700v1_3800B.patch
new file mode 100644
index 0000000..b4013bb
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/568-board_DGND3700v1_3800B.patch
@@ -0,0 +1,67 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2132,6 +2132,48 @@
+ .has_ehci0 = 1,
+ };
+
++static struct b53_platform_data DGND3700v1_3800B_b53_pdata = {
++ .alias = "eth0",
++};
++
++static struct spi_board_info DGND3700v1_3800B_spi_devices[] = {
++ {
++ .modalias = "b53-switch",
++ .max_speed_hz = 781000,
++ .bus_num = 0,
++ .chip_select = 1,
++ .platform_data = &DGND3700v1_3800B_b53_pdata,
++ }
++};
++
++static struct board_info __initdata board_DGND3700v1_3800B = {
++ .name = "DGND3700v1_3800B",
++ .expected_cpu_id = 0x6368,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [5] = {
++ .used = 1,
++ .phy_id = 0xff,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .name = "RGMII",
++ },
++ },
++ },
++
++ .spis = DGND3700v1_3800B_spi_devices,
++ .num_spis = ARRAY_SIZE(DGND3700v1_3800B_spi_devices),
++};
++
+ static struct sprom_fixup __initdata vr3025u_fixups[] = {
+ { .offset = 97, .value = 0xfeb3 },
+ { .offset = 98, .value = 0x1618 },
+@@ -2723,6 +2765,7 @@
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ &board_96368mvwg,
+ &board_96368mvngr,
++ &board_DGND3700v1_3800B,
+ &board_P870HW51A_V2,
+ &board_VR3025u,
+ &board_VR3025un,
+@@ -2813,6 +2856,7 @@
+ { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+ { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+ { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
++ { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B,
},
+ { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
