Signed-off-by: Rafał Miłecki <zaj...@gmail.com> --- .../generic/files/drivers/net/phy/b53/b53_regs.h | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h b/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h index 4899cc4..6d71493 100644 --- a/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h +++ b/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h @@ -50,6 +50,9 @@ /* Jumbo Frame Registers */ #define B53_JUMBO_PAGE 0x40 +/* CFP Configuration Registers Page */ +#define B53_CFP_PAGE 0xa1 + /************************************************************************* * Control Page registers *************************************************************************/ @@ -99,6 +102,20 @@ #define B53_MC_FLOOD_MASK 0x34 #define B53_IPMC_FLOOD_MASK 0x36 +/* On BCM5301X we can override ports 0-5 and 7 as well */ +/* For port 8 still use B53_PORT_OVERRIDE_CTRL */ +#define B53_GMII_PORT_OVERRIDE_CTRL(i) (0x58 + i) +#define GMII_PORT_OVERRIDE_LINK BIT(0) +#define GMII_PORT_OVERRIDE_FULL_DUPLEX BIT(1) /* 0 = Half Duplex */ +#define GMII_PORT_OVERRIDE_SPEED_S 2 +#define GMII_PORT_OVERRIDE_SPEED_10M (0 << PORT_OVERRIDE_SPEED_S) +#define GMII_PORT_OVERRIDE_SPEED_100M (1 << PORT_OVERRIDE_SPEED_S) +#define GMII_PORT_OVERRIDE_SPEED_1000M (2 << PORT_OVERRIDE_SPEED_S) +#define GMII_PORT_OVERRIDE_RX_FLOW BIT(4) +#define GMII_PORT_OVERRIDE_TX_FLOW BIT(5) +#define GMII_PORT_OVERRIDE_EN BIT(6) /* Use the register contents */ +#define GMII_PORT_OVERRIDE_SPEED_2000M BIT(7) /* Requires setting 1000M */ + /* Software reset register (8 bit) */ #define B53_SOFTRESET 0x79 @@ -156,6 +173,9 @@ #define GC_FRM_MGMT_PORT_04 0x00 #define GC_FRM_MGMT_PORT_MII 0x80 +#define B53_BRCM_HDR 0x03 +#define BRCM_HDR_EN BIT(0) + /* Device ID register (8 or 32 bit) */ #define B53_DEVICE_ID 0x30 @@ -310,4 +330,10 @@ #define JMS_MIN_SIZE 1518 #define JMS_MAX_SIZE 9724 +/************************************************************************* + * CFP Configuration Page Registers + *************************************************************************/ + +#define B53_CFP_CTRL 0x00 + #endif /* !__B53_REGS_H */ -- 1.8.4.5 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel