This mail thread seem to have gone dark since december with seemingly no conclusion.
I have tried to collect the experiences reported on the wiki page: wiki.openwrt.org/toh/mikrotik/rb2011uias As you can see from the table, for me it only works with 0x6f. Chris, for whom both 0x3e and 0x6f work has a rev 2 AR9344. I have a rev 3. AR8327 is rev. 4 on both our routerboards. No info what rev Matt has, he is the other one reporting that only 0x6f works. I am also observing some amount of increases in switch 0 port 0 RxBadByte (aka: from CPU to AR8327). It seems to happen for all type of traffic sent from CPU to switch, eg: whether i inject it from WiFi or from a 100 Mbps port, and whether i send it out on an untagged port (lan) or tagged one (from CPU, Wan). I have not really identified any noticeable performance impact from this effect through. Would be nice to hear some logic why 0x6f is the right value. >From the discussion it looks a bit like trial and error. Cheers Toerless _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel