From: Tom Deng <2579131...@qq.com>
Adding support for OYE-0001 Wireless Router. OYE-0001 is a wireless router made by oyewifi.com. Below is the details: MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN. Signed-off-by: Tom Deng <2579131...@qq.com> --- Index: target/linux/ramips/base-files/etc/diag.sh =================================================================== --- target/linux/ramips/base-files/etc/diag.sh (revision 43797) +++ target/linux/ramips/base-files/etc/diag.sh (working copy) @@ -185,6 +185,9 @@ f7c027) status_led="belkin:orange:status" ;; + oye-0001) + status_led="oye:green:wifi" + ;; na930) status_led="na930:blue:power" ;; Index: target/linux/ramips/base-files/etc/uci-defaults/01_leds =================================================================== --- target/linux/ramips/base-files/etc/uci-defaults/01_leds (revision 43797) +++ target/linux/ramips/base-files/etc/uci-defaults/01_leds (working copy) @@ -198,6 +198,10 @@ set_wifi_led "zbtlink:blue:air" set_usb_led "zbtlink:blue:usb" ;; + oye-0001) + ucidef_set_led_default "power" "power" "oye:green:power" "1" + set_wifi_led "oye:green:wifi" + ;; wr8305rt) ucidef_set_led_default "power" "power" "wr8305rt:sys" "1" set_usb_led "wr8305rt:usb" Index: target/linux/ramips/base-files/etc/uci-defaults/02_network =================================================================== --- target/linux/ramips/base-files/etc/uci-defaults/02_network (revision 43797) +++ target/linux/ramips/base-files/etc/uci-defaults/02_network (working copy) @@ -103,6 +103,7 @@ dir-615-h1 | \ hlk-rm04 | \ mzk-w300nh2 | \ + oye-0001 | \ mzk-750dhp) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" @@ -220,6 +221,11 @@ wan_mac=$(mtd_get_mac_binary devdata 7) ;; + oye-0001) + lan_mac=$(mtd_get_mac_binary factory 40) + wan_mac=$(mtd_get_mac_binary factory 46) + ;; + w306r-v20) lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(macaddr_add "$lan_mac" 5) Index: target/linux/ramips/base-files/lib/preinit/06_set_iface_mac =================================================================== --- target/linux/ramips/base-files/lib/preinit/06_set_iface_mac (revision 0) +++ target/linux/ramips/base-files/lib/preinit/06_set_iface_mac (revision 0) @@ -0,0 +1,113 @@ +# +# Copyright (C) 2011 OpenWrt.org +# + +preinit_set_mac_address() { + local mac + + . /lib/functions.sh + . /lib/ramips.sh + + case $(ramips_board_name) in + 3g-6200n |\ + 3g-6200nl |\ + 3g300m | \ + dir-620-d1 |\ + dir-300-b7 | \ + w150m | \ + mzk-w300nh2 |\ + wl-330n |\ + wl-330n3g |\ + wr8305rt) + mac=$(mtd_get_mac_binary factory 4) + ifconfig eth0 hw ether $mac 2>/dev/null + ;; + bc2 |\ + broadway |\ + d105 |\ + dir-620-a1 |\ + esr-9753 |\ + freestation5 |\ + hlk-rm04 | \ + mpr-a1 | \ + mpr-a2 | \ + dir-300-b7 | \ + dir-320-b1 | \ + psr-680w |\ + rt-n56u |\ + sl-r7205) + mac=$(mtd_get_mac_binary factory 4) + mac=$(macaddr_setbit_la "$mac") + ifconfig eth0 hw ether $mac 2>/dev/null + ;; + br-6475nd) + mac=$(mtd_get_mac_binary devdata 13) + ifconfig eth0 hw ether $mac 2>/dev/null + ;; + asl26555 |\ + dir-300-b1 |\ + dir-300-b2 |\ + dir-600-b1 |\ + dir-610-a1) + mac=$(mtd_get_mac_binary devdata 16388) + ifconfig eth0 hw ether $mac 2>/dev/null + ;; + cy-swr1100 |\ + dir-645) + mac=$(mtd_get_mac_ascii nvram lanmac) + mac=$(macaddr_setbit_la "$mac") + ifconfig eth0 hw ether $mac 2>/dev/null + ;; + dap-1350) + mac=$(mtd_get_mac_binary devdata 46) + ifconfig eth0 hw ether $mac 2>/dev/null + ;; + all0239-3g |\ + all0256n |\ + all5002 |\ + all5003 |\ + awm002-evb |\ + carambola |\ + dir-615-h1 |\ + fonera20n |\ + ip2202 |\ + rt-n13u |\ + hw550-3g |\ + nbg-419n |\ + omni-emb |\ + omni-emb-hpm |\ + px4885 |\ + tew-691gr |\ + tew-692gr |\ + w306r-v20 |\ + w502u |\ + wr6202 |\ + wnce2001 |\ + xdxrn502j) + mac=$(mtd_get_mac_binary factory 40) + ifconfig eth0 hw ether $mac 2>/dev/null + ;; + m3 |\ + m4 |\ + x5 |\ + x8) + mac=$(mtd_get_mac_binary factory 4) + mac=$(macaddr_add "$mac" -1) + ifconfig eth0 hw ether $mac 2>/dev/null + ;; + oye-0001) + mac=$(mtd_get_mac_binary factory 40) + ifconfig eth0 hw ether $mac 2>/dev/null + ;; + wl341v3) + mac=$(mtd_get_mac_binary board-nvram 65440) + ifconfig eth0 hw ether $mac 2>/dev/null + ;; + rt-n10-plus) + mac=$(mtd_get_mac_binary devconf 4) + ifconfig eth0 hw ether $mac 2>/dev/null + ;; + esac +} + +boot_hook_add preinit_main preinit_set_mac_address Index: target/linux/ramips/base-files/lib/ramips.sh =================================================================== --- target/linux/ramips/base-files/lib/ramips.sh (revision 43797) +++ target/linux/ramips/base-files/lib/ramips.sh (working copy) @@ -322,6 +322,9 @@ *"Zbtlink ZBT-WA05") name="zbt-wa05" ;; + *"OYE-0001") + name="oye-0001" + ;; *"ZBT WR8305RT") name="wr8305rt" ;; Index: target/linux/ramips/base-files/lib/upgrade/platform.sh =================================================================== --- target/linux/ramips/base-files/lib/upgrade/platform.sh (revision 43797) +++ target/linux/ramips/base-files/lib/upgrade/platform.sh (working copy) @@ -95,6 +95,7 @@ wmr300 |\ wr8305rt |\ wrtnode |\ + oye-0001 |\ x5 |\ x8 |\ zbt-wa05 |\ Index: target/linux/ramips/dts/OYE-0001.dts =================================================================== --- target/linux/ramips/dts/OYE-0001.dts (revision 0) +++ target/linux/ramips/dts/OYE-0001.dts (revision 0) @@ -0,0 +1,123 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "ralink,mt7620a-soc"; + model = "OYE-0001"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + gpio2: gpio@660 { + status = "okay"; + }; + + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q128"; + reg = <0 0>; + linux,modalias = "m25p80", "w25q128"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + + ralink,port-map = "llllw"; + }; + + gsw@10110000 { + ralink,port4 = "ephy"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + gpio-leds { + compatible = "gpio-leds"; + powerled { + label = "oye:green:power"; + gpios = <&gpio0 9 1>; + }; + wifiled { + label = "oye:green:wifi"; + gpios = <&gpio3 0 1>; + }; + }; + + sdhci@10130000 { + status = "okay"; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + pcie@10140000 { + status = "okay"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + s1 { + label = "reset"; + gpios = <&gpio0 1 1>; + linux,code = <0x198>; + }; + }; +}; Index: target/linux/ramips/image/Makefile =================================================================== --- target/linux/ramips/image/Makefile (revision 43797) +++ target/linux/ramips/image/Makefile (working copy) @@ -724,6 +724,7 @@ na930_mtd_size=20971520 Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size)) Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP) +Image/Build/Profile/OYE-0001=$(call BuildFirmware/Default16M/$(1),$(1),oye-0001,OYE-0001) Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1,Y1) Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1s,Y1S) @@ -740,6 +741,7 @@ $(call Image/Build/Profile/WHR1166D,$(1)) $(call Image/Build/Profile/MZK-750DHP,$(1)) $(call Image/Build/Profile/NA930,$(1)) + $(call Image/Build/Profile/OYE-0001,$(1)) $(call Image/Build/Profile/Y1,$(1)) $(call Image/Build/Profile/Y1S,$(1)) endef
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel