On 10 July 2015 at 05:07, camden lindsay <camden.lindsay+open...@gmail.com> wrote: > I'm sorry, i said ath9k in the subject but the above seems more likely > to be ath10k. > > On Thu, Jul 9, 2015 at 7:03 PM, camden lindsay > <camden.lindsay+open...@gmail.com> wrote: >> Hello- >> >> Thought I should report this, since there was so much discussion and >> confusion on tracker https://dev.openwrt.org/ticket/11862 causing a >> lot of work for some folks here. >> >> ...snip... >> ... >> [2060235.460000] ath: phy1: Failed to stop TX DMA, queues=0x002! >> [2060265.460000] ath: phy1: Failed to stop TX DMA, queues=0x002! >> [2061047.180000] ath: phy1: Failed to stop TX DMA, queues=0x002! >> [2104015.840000] ath: phy1: Unable to reset channel, reset status -5 >> [2145012.920000] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, >> skipped old beacon >> [2145013.030000] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, >> skipped old beacon
It was fixed in trunk (by using newer firmware and driver). Regards, Roman _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
