Hi, as I've already written on the OpenWrt ML, I'm currently porting OpenWrt to the TP-LINK TL-WR941ND v6, which uses a TP9343 SoC (which is confusingly part of the QCA956x series). The WMAC identifies as QCA9561 (0x600 rev 0).
I'm unable to get the WLAN working at all. The TX seems to work fine (at least I can see the beacons when I put the card into AP mode), but RX is completely dead (iw scan is empty, etc...). As I'm not familar with ath9k, I need some help debugging this. I'm using the OpenWrt trunk, which contains a recent version of mac80211 based on wireless-testing, it already contains the patches "ath9k_hw: fix device ID check for AR956x" and "ath9k: Fix register definitions for QCA956x". I've attached a dump of all debugfs information ath9k provides while the WLAN is configured in IBSS mode in a cell that should be quite active. Thanks in advance, Matthias
phy0.tar
Description: Unix tar archive
signature.asc
Description: OpenPGP digital signature
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel