Previous patch set backported the recently posted NAND flash driver to 3.18 and 4.1 kernel. This patch now enables it in the kernel config.
There is no change to the partition layout and init yet. But the NAND flash can be seen in the mtd list on an AP148: root@OpenWrt:/# cat /proc/mtd dev: size erasesize name mtd0: 10000000 00020000 "qcom-nandc" ... Signed-off-by: Mathieu Olivari <math...@codeaurora.org> --- target/linux/ipq806x/Makefile | 2 +- target/linux/ipq806x/config-3.18 | 21 ++++++++++++++++++++- target/linux/ipq806x/config-4.1 | 19 ++++++++++++++++++- 3 files changed, 39 insertions(+), 3 deletions(-) diff --git a/target/linux/ipq806x/Makefile b/target/linux/ipq806x/Makefile index b6ddfe2..45f83dd 100644 --- a/target/linux/ipq806x/Makefile +++ b/target/linux/ipq806x/Makefile @@ -5,7 +5,7 @@ include $(TOPDIR)/rules.mk ARCH:=arm BOARD:=ipq806x BOARDNAME:=Qualcomm Atheros IPQ806X -FEATURES:=squashfs +FEATURES:=squashfs nand ubifs CPU_TYPE:=cortex-a7 MAINTAINER:=John Crispin <blo...@openwrt.org> diff --git a/target/linux/ipq806x/config-3.18 b/target/linux/ipq806x/config-3.18 index feedfd9..2a837f5 100644 --- a/target/linux/ipq806x/config-3.18 +++ b/target/linux/ipq806x/config-3.18 @@ -104,6 +104,8 @@ CONFIG_CRC16=y # CONFIG_CRC32_SARWATE is not set CONFIG_CRC32_SLICEBY8=y CONFIG_CROSS_MEMORY_ATTACH=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_SHA1_ARM_NEON is not set # CONFIG_CRYPTO_SHA512_ARM_NEON is not set CONFIG_CRYPTO_XZ=y @@ -251,10 +253,21 @@ CONFIG_MSM_IOMMU=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_IMPA7 is not set +CONFIG_MTD_JEDECPROBE=y CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_QCOM=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPLIT_FIRMWARE=y CONFIG_MTD_SPLIT_FIT_FW=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +# CONFIG_MTD_UBI_BLOCK is not set +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MULTI_IRQ_HANDLER=y CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_NEED_DMA_MAP_STATE=y @@ -327,7 +340,7 @@ CONFIG_PREEMPT_RCU=y CONFIG_PRINTK_TIME=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_PTP_1588_CLOCK=y -# CONFIG_QCOM_ADM is not set +CONFIG_QCOM_ADM=y CONFIG_QCOM_BAM_DMA=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_HFPLL=y @@ -395,6 +408,11 @@ CONFIG_THERMAL_OF=y CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TIMER_STATS=y CONFIG_TREE_PREEMPT_RCU=y +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_XZ=y +CONFIG_UBIFS_FS_ZLIB=y CONFIG_UEVENT_HELPER_PATH="" CONFIG_UID16=y CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" @@ -416,5 +434,6 @@ CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_BCJ=y CONFIG_ZBOOT_ROM_BSS=0 CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_INFLATE=y CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ipq806x/config-4.1 b/target/linux/ipq806x/config-4.1 index 0262e7a..f711dd5 100644 --- a/target/linux/ipq806x/config-4.1 +++ b/target/linux/ipq806x/config-4.1 @@ -111,6 +111,8 @@ CONFIG_CRC16=y # CONFIG_CRC32_SARWATE is not set CONFIG_CRC32_SLICEBY8=y CONFIG_CROSS_MEMORY_ATTACH=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y CONFIG_CRYPTO_XZ=y CONFIG_DCACHE_WORD_ACCESS=y CONFIG_DEBUG_BUGVERBOSE=y @@ -263,9 +265,18 @@ CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_QCOM=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPLIT_FIRMWARE=y CONFIG_MTD_SPLIT_FIT_FW=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +# CONFIG_MTD_UBI_BLOCK is not set +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MULTI_IRQ_HANDLER=y CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_NEED_DMA_MAP_STATE=y @@ -341,7 +352,7 @@ CONFIG_PREEMPT_RCU=y CONFIG_PRINTK_TIME=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_PTP_1588_CLOCK=y -# CONFIG_QCOM_ADM is not set +CONFIG_QCOM_ADM=y CONFIG_QCOM_BAM_DMA=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_HFPLL=y @@ -406,6 +417,11 @@ CONFIG_THERMAL_OF=y # CONFIG_THUMB2_KERNEL is not set CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TIMER_STATS=y +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_XZ=y +CONFIG_UBIFS_FS_ZLIB=y CONFIG_UEVENT_HELPER_PATH="" CONFIG_UID16=y CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" @@ -427,5 +443,6 @@ CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_BCJ=y CONFIG_ZBOOT_ROM_BSS=0 CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_INFLATE=y CONFIG_ZONE_DMA_FLAG=0 -- 2.1.4 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
