Hi, Could anyone Please guide me how i can create 2 separate default settings for 2.4GHz and 5GHz.
Thanks, On Sat, Aug 8, 2015 at 8:26 PM, John kerry <kerry9...@gmail.com> wrote: > Hi, > > I have to keep 2 default settings for wireless, i means to say i have to > configure default settings for 2.4GHz and 5GHz. > > How i can configure wireless files. mainly i will add switch button in the > GUI to switch over 2.4GHz and 5GHz. > > How i can control this in backend, how i can add file which handle this > and configure 2 separate default settings for 2.4GHz and 5GHz. > > Thanks, > > On Fri, Aug 7, 2015 at 1:50 PM, David Lang <da...@lang.hm> wrote: > >> You cannot use both radios on the same channel, or even the same band. >> >> One radio will only work on channels 1-11 and the other will only work on >> channels 36+ >> >> pick which band you are going to use to connect to the remote AP and >> which you are going to use to have your clients connect to it. >> >> David Lang >> >> >> On Fri, 7 Aug 2015, John kerry wrote: >> >> Hi, >>> >>> >>> I have one and i configured as below: >>> >>> config wifi-device 'wifi0' >>> option type 'qcawifi' >>> option channel 'auto' >>> option macaddr '00:26:75:bd:37:24' >>> option hwmode '11ng' >>> option txpower '16' >>> option htmode 'HT20' >>> >>> config wifi-iface >>> option device 'wifi0' >>> option network 'lan' >>> option mode 'ap' >>> option ssid 'Test_Ap' >>> option encryption 'psk2' >>> option key 'Test_AP' >>> >>> >>> We can configure one radio only to work like that. >>> Something like below: >>> >>> config wifi-device 'radio0' >>> >>>> option type 'mac80211' >>>>> option channel '11' >>>>> option hwmode '11g' >>>>> option path 'platform/ar933x_wmac' >>>>> option htmode 'HT20' >>>>> option country 'US' >>>>> option txpower '20' >>>>> >>>>> config wifi-iface 'ap1' >>>>> option device 'radio0' >>>>> option mode 'ap' >>>>> option wds '1' >>>>> option ssid 'my AP' >>>>> option network 'lan' >>>>> >>>>> config wifi-iface 'mesh1' >>>>> option device 'radio0' >>>>> option mode 'mesh' >>>>> option mesh_id 'my mesh' >>>>> option network 'lan' >>>>> >>>> >>> >>> >>> On Fri, Aug 7, 2015 at 11:31 AM, Weedy <weedy2...@gmail.com> wrote: >>> >>> On 6 Aug 2015 23:15, "John kerry" <kerry9...@gmail.com> wrote: >>>> >>>>> >>>>> Hi, >>>>> >>>>> >>>>> Could anyone please help me on this to configure the wireless in such a >>>>> >>>> way that when we connect to wireless WAN the LAN SSID should not change. >>>> >>>>> >>>>> >>>>> Thanks, >>>>> >>>> >>>> You need 2 physical radios. >>>> >>>> >>> >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel