On 02/09/2015 12:08, Daniel Dickinson wrote: > The following patch series adds support for three PowerCloud devices. > The patches have been reworked from the previous bunged up iteration > and have been tested on the actual devices which are currently in use. > > There is, however, one question on the CR3000 which I had to redo > from scratch (and it's been quite some time since I did board support > stuff) and that is whether to get gigibit speeds on the LAN switch > there is some setting that is needed (currently the switch detects as > gigabit however link speed only detects as 100Mbit, but I'm not sure > if the issue is hardware or board support definition). > > Regards, > > Daniel > > Daniel Dickinson (9): > ar71xx: PowerCloud CAP324 kernel support > ar71xx: PowerCloud CAP324 image generation > ar71xx: PowerCloud CAP324 OpenWrt configuration > ar71xx: PowerCloud CR3000 kernel support > ar71xx: PowerCloud CR3000 image generation > ar71xx: PowerCloud CR3000 OpenWrt configuration > ar71xx: PowerCloud CR5000 kernel support > ar71xx: PowerCloud CR5000 image generation > ar71xx: PowerCloud CR5000 openwrt configuration > > package/boot/uboot-envtools/files/ar71xx | 3 + > target/linux/ar71xx/base-files/etc/diag.sh | 9 + > .../ar71xx/base-files/etc/uci-defaults/01_leds | 20 ++ > .../ar71xx/base-files/etc/uci-defaults/02_network | 8 + > target/linux/ar71xx/base-files/lib/ar71xx.sh | 9 + > .../ar71xx/base-files/lib/upgrade/platform.sh | 5 +- > target/linux/ar71xx/config-4.1 | 3 + > target/linux/ar71xx/generic/profiles/pcs.mk | 118 +++++++++++ > target/linux/ar71xx/image/Makefile | 12 ++ > target/linux/ar71xx/mikrotik/config-default | 3 + > target/linux/ar71xx/nand/config-default | 3 + > ...-MIPS-ath79-add-powercloud-cap324-support.patch | 175 ++++++++++++++++ > ...-MIPS-ath79-add-powercloud-cr3000-support.patch | 201 +++++++++++++++++++ > ...-MIPS-ath79-add-powercloud-cr5000-support.patch | 219 > +++++++++++++++++++++ > 14 files changed, 787 insertions(+), 1 deletion(-) > create mode 100644 > target/linux/ar71xx/patches-4.1/815-MIPS-ath79-add-powercloud-cap324-support.patch > create mode 100644 > target/linux/ar71xx/patches-4.1/816-MIPS-ath79-add-powercloud-cr3000-support.patch > create mode 100644 > target/linux/ar71xx/patches-4.1/817-MIPS-ath79-add-powercloud-cr5000-support.patch > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >
Hi, patches dont apply anymore i am afraid. you wanted to resend anyhow with the new FW building pattern added. i marked them as "Changes requested" in patchwork. looking fwd to the next version John _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel