On 10 September 2015 at 22:03, Matti Laakso <malaa...@elisanet.fi> wrote: > Use the new --ip-family option to start both IPv4 and IPv6 sessions > by default. Autoconnect can't be used when starting two sessions, > so revert back to using the client IDs and packet data handles for > handling the network connection. > > Some modem firmwares do not implement a RA server, therefore by > default use outband IP configuration and static addressing. Some > other firmwares report bogus IP configuration with the WDS get > current settings command. In this case inband configuration with > DHCP/RA can be optionally enabled by setting option dhcp to 1. > > Per 3GPP standard a /64 prefix is served to all clients, which is > extended to LAN as specified in RFC 7278. > > v2: Restrict the IPv6 gateway route source address > Signed-off-by: Matti Laakso <malaa...@elisanet.fi>
Hi Matti. I built openwrt with uqmi built into the squashfs with your patch applied and for some reason the qmi.sh does not get execute bit when installed: root@OpenWrt:~# ls -l /lib/netifd/proto/ -rwxr-xr-x 1 root root 2430 Sep 16 20:30 3g.sh -rwxr-xr-x 1 root root 2165 Sep 16 20:30 dhcp.sh -rwxr-xr-x 1 root root 3508 Sep 16 20:30 dhcpv6.sh -rwxr-xr-x 1 root root 3393 Sep 16 20:30 openconnect.sh -rwxr-xr-x 1 root root 6945 Sep 16 20:30 ppp.sh -rw-r--r-- 1 root root 6557 Sep 16 20:30 qmi.sh -rwxr-xr-x 1 root root 3325 Sep 16 20:30 wwan.sh Apparently the protocol won't then load properly. Any idea why this is? Applying chmod +x to the file makes the protocol work. The other thing I was wondering is the tests for the new boolean variables with -z. E.g if there now is an explicit config directive to set dhcp off ("option dhcp 0") then dhcp would still be enabled. I think the recommended design is to use something along the lines of: if [ "${boolean_variable:-0}" -gt 0 ]; then whatever; fi It looks like this should maybe apply to both dhcp and ipv6 variables? Br, -Antti _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel