On 17.09.2015 21:22, Tara Lorenz wrote: > > Hello everybody, > > the old uboot-omap package fails to compile when using gcc 5.x. > Therefore i made a patch using a more recent version of u-boot. > I decided to choose 15.07, the same version as currently used for the > sunxi based boards. > > So far i only tested that the package can now be compiled using > gcc 5.x. I can test functionality for beagle-board, beagle-bone > and panda-board during the weekend, if that's needed. > > I hope it's helpful somehow. > > Cheers, Tara >
u-boot 2015.07 does not boot at my end. Hardware: BeagleBoard C4 ("ebvbeagle") I was doing some development locally and wanted to update u-boot but the MLO seems to be broken. 2015.04 works (all earlier versions work too) 2015.07 does not work (holding USR button, pressing RESET does not work) 2015.10-rc3 does not work I used default gcc 4.8 to eliminate compile issues (backporting gcc5 patches to uboot 2013 works) Please test the update on your 3 boards working bootlog - as written before 2015.07 does not react/print anything: U-Boot SPL 2015.04 (Sep 18 2015 - 08:05:03) SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! reading u-boot.img reading u-boot.img U-Boot 2015.04 (Sep 18 2015 - 08:05:03) OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 *** Warning - bad CRC, using default environment Beagle Rev C4 Timed out in wait_for_event: status=0000 Check if pads/pull-ups of bus 1 are properly configured No EEPROM on expansion board Die ID #2f92000400000000040365fa16001013 Net: usb_ether Error: usb_ether address not set. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device gpio: pin 173 (gpio 173) value is 1 gpio: pin 7 (gpio 7) value is 0 SD/MMC found on device 0 reading uEnv.txt 488 bytes read in 5 ms (94.7 KiB/s) Loaded environment from uEnv.txt Importing environment from mmc ... Running uenvcmd ... reading openwrt-omap-zImage 2081208 bytes read in 160 ms (12.4 MiB/s) reading omap3-beagle.dtb 61168 bytes read in 12 ms (4.9 MiB/s) Kernel image @ 0x80200000 [ 0x000000 - 0x1fc1b8 ] ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f91eef Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.18.21 (tenchi@tenchi-htpc) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46986) ) #1 SMP Fri Sep 18 08:08:04 CEST 2015 [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: TI OMAP3 BeagleBoard ... Greetings, Dirk _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel