Done, Thanks for the comment, please take a look at V2
在 15/9/28 下午7:25,“Piotr Dymacz”<pep...@gmail.com> 写入: >Hello, > >Please, take a look at other dts files in ramips target and follow the >general convention, like: >- use only model name for dts filename >- keep empty lines between nodes and between nodes and properties (ex. [1]) > >[1] >https://dev.openwrt.org/browser/trunk/target/linux/ramips/dts/WIZFI630A.dts#L126 > >Cheers, >Piotr > >2015-09-28 12:45 GMT+02:00 Comman Kang <kan...@163.com>: >> HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. >> These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). >> This patch adds support for them. >> >> The original author is Justin Liu (rss...@gmail.com). I ported the patch to >> trunk and submitted it here with his approval. >> >> Signed-off-by: Xiaoning Kang <kan...@163.com> >> >> >> >> diff --git a/target/linux/ramips/dts/HiWiFi-HC5661.dts >> b/target/linux/ramips/dts/HiWiFi-HC5661.dts >> new file mode 100644 >> index 0000000..f3ca70c >> --- /dev/null >> +++ b/target/linux/ramips/dts/HiWiFi-HC5661.dts >> @@ -0,0 +1,162 @@ >> +/dts-v1/; >> + >> +/include/ "mt7620a.dtsi" >> + >> +/ { >> + compatible = "HiWiFi-HC5661", "ralink,mt7620a-soc"; >> + model = "HiWiFi HC5661"; >> + >> + chosen { >> + bootargs = "console=ttyS0,115200"; >> + }; >> + >> + palmbus@10000000 { >> + sysc@0 { >> + ralink,gpiomux = "i2c", "jtag"; >> + ralink,uartmux = "gpio"; >> + ralink,wdtmux = <1>; >> + }; >> + gpio0: gpio@600 { >> + status = "okay"; >> + }; >> + gpio2: gpio@660 { >> + status = "okay"; >> + }; >> + gpio3: gpio@688 { >> + status = "okay"; >> + }; >> + >> + spi@b00 { >> + status = "okay"; >> + >> + m25p80@0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "w25q128"; >> + reg = <0 0>; >> + linux,modalias = "m25p80", "w25q128"; >> + spi-max-frequency = <10000000>; >> + >> + partition@0 { >> + label = "u-boot"; >> + reg = <0x0 0x30000>; >> + }; >> + >> + partition@30000 { >> + label = "u-boot-env"; >> + reg = <0x30000 0x10000>; >> + read-only; >> + }; >> + >> + factory: partition@40000 { >> + label = "factory"; >> + reg = <0x40000 0x10000>; >> + }; >> + >> + partition@50000 { >> + label = "firmware"; >> + reg = <0x50000 0xf80000>; >> + }; >> + >> + partition@fd0000 { >> + label = "hwf_config"; >> + reg = <0xfd0000 0x10000>; >> + }; >> + >> + bdinfo: partition@fe0000 { >> + label = "bdinfo"; >> + reg = <0xfe0000 0x10000>; >> + }; >> + >> + partition@ff0000 { >> + label = "backup"; >> + reg = <0xff0000 0x10000>; >> + }; >> + }; >> + }; >> + }; >> + >> + ehci@101c0000 { >> + status = "okay"; >> + }; >> + >> + ohci@101c1000 { >> + status = "okay"; >> + }; >> + >> + ethernet@10100000 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&ephy_pins>; >> + mtd-mac-address = <&factory 0x4>; >> + ralink,port-map = "wllll"; >> + }; >> + >> + sdhci@10130000 { >> + status = "okay"; >> + }; >> + >> + wmac@10180000 { >> + ralink,mtd-eeprom = <&factory 0>; >> + }; >> + >> + pcie@10140000 { >> + status = "okay"; >> + }; >> + >> + pinctrl { >> + state_default: pinctrl0 { >> + gpio { >> + ralink,group = "uartf", "wled", "nd_sd"; >> + ralink,function = "gpio"; >> + }; >> + pa { >> + ralink,group = "pa"; >> + ralink,function = "pa"; >> + }; >> + }; >> + }; >> + >> + gpio-leds { >> + compatible = "gpio-leds"; >> + system { >> + label = "hiwifi-5661:blue:system"; >> + gpios = <&gpio0 9 1>; >> + }; >> + internet { >> + label = "hiwifi-5661:blue:internet"; >> + gpios = <&gpio0 11 1>; >> + }; >> + wlan2p4 { >> + label = "hiwifi-5661:blue:wlan-2p4"; >> + gpios = <&gpio3 0 1>; >> + }; >> + wlan5p { >> + label = "hiwifi-5661:blue:wlan-5p"; >> + gpios = <&gpio0 7 1>; >> + }; >> + }; >> + >> + gpio-keys-polled { >> + compatible = "gpio-keys-polled"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + poll-interval = <20>; >> + reset { >> + label = "reset"; >> + gpios = <&gpio0 12 1>; >> + linux,code = <0x198>; >> + }; >> + }; >> + >> + gpio_export { >> + compatible = "gpio-export"; >> + #size-cells = <0>; >> + usbpower { >> + gpio-export,name = "usbpower"; >> + gpio-export,output = <1>; >> + gpios = <&gpio0 13 0>; >> + }; >> + }; >> + >> +}; >> + >> diff --git a/target/linux/ramips/dts/HiWiFi-HC5761.dts >> b/target/linux/ramips/dts/HiWiFi-HC5761.dts >> new file mode 100644 >> index 0000000..1340751 >> --- /dev/null >> +++ b/target/linux/ramips/dts/HiWiFi-HC5761.dts >> @@ -0,0 +1,162 @@ >> +/dts-v1/; >> + >> +/include/ "mt7620a.dtsi" >> + >> +/ { >> + compatible = "HiWiFi-HC5761", "ralink,mt7620a-soc"; >> + model = "HiWiFi HC5761"; >> + >> + chosen { >> + bootargs = "console=ttyS0,115200"; >> + }; >> + >> + palmbus@10000000 { >> + sysc@0 { >> + ralink,gpiomux = "i2c", "jtag"; >> + ralink,uartmux = "gpio"; >> + ralink,wdtmux = <1>; >> + }; >> + gpio0: gpio@600 { >> + status = "okay"; >> + }; >> + gpio2: gpio@660 { >> + status = "okay"; >> + }; >> + gpio3: gpio@688 { >> + status = "okay"; >> + }; >> + >> + spi@b00 { >> + status = "okay"; >> + >> + m25p80@0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "w25q128"; >> + reg = <0 0>; >> + linux,modalias = "m25p80", "w25q128"; >> + spi-max-frequency = <10000000>; >> + >> + partition@0 { >> + label = "u-boot"; >> + reg = <0x0 0x30000>; >> + }; >> + >> + partition@30000 { >> + label = "u-boot-env"; >> + reg = <0x30000 0x10000>; >> + read-only; >> + }; >> + >> + factory: partition@40000 { >> + label = "factory"; >> + reg = <0x40000 0x10000>; >> + }; >> + >> + partition@50000 { >> + label = "firmware"; >> + reg = <0x50000 0xf80000>; >> + }; >> + >> + partition@fd0000 { >> + label = "hwf_config"; >> + reg = <0xfd0000 0x10000>; >> + }; >> + >> + bdinfo: partition@fe0000 { >> + label = "bdinfo"; >> + reg = <0xfe0000 0x10000>; >> + }; >> + >> + partition@ff0000 { >> + label = "backup"; >> + reg = <0xff0000 0x10000>; >> + }; >> + }; >> + }; >> + }; >> + >> + ehci@101c0000 { >> + status = "okay"; >> + }; >> + >> + ohci@101c1000 { >> + status = "okay"; >> + }; >> + >> + ethernet@10100000 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&ephy_pins>; >> + mtd-mac-address = <&factory 0x4>; >> + ralink,port-map = "wllll"; >> + }; >> + >> + sdhci@10130000 { >> + status = "okay"; >> + }; >> + >> + wmac@10180000 { >> + ralink,mtd-eeprom = <&factory 0>; >> + }; >> + >> + pcie@10140000 { >> + status = "okay"; >> + }; >> + >> + pinctrl { >> + state_default: pinctrl0 { >> + gpio { >> + ralink,group = "uartf", "wled", "nd_sd"; >> + ralink,function = "gpio"; >> + }; >> + pa { >> + ralink,group = "pa"; >> + ralink,function = "pa"; >> + }; >> + }; >> + }; >> + >> + gpio-leds { >> + compatible = "gpio-leds"; >> + system { >> + label = "hiwifi-5761:blue:system"; >> + gpios = <&gpio0 9 1>; >> + }; >> + internet { >> + label = "hiwifi-5761:blue:internet"; >> + gpios = <&gpio0 11 1>; >> + }; >> + wlan2p4 { >> + label = "hiwifi-5761:blue:wlan-2p4"; >> + gpios = <&gpio3 0 1>; >> + }; >> + wlan5p { >> + label = "hiwifi-5761:blue:wlan-5p"; >> + gpios = <&gpio0 7 1>; >> + }; >> + }; >> + >> + gpio-keys-polled { >> + compatible = "gpio-keys-polled"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + poll-interval = <20>; >> + reset { >> + label = "reset"; >> + gpios = <&gpio0 12 1>; >> + linux,code = <0x198>; >> + }; >> + }; >> + >> + gpio_export { >> + compatible = "gpio-export"; >> + #size-cells = <0>; >> + usbpower { >> + gpio-export,name = "usbpower"; >> + gpio-export,output = <1>; >> + gpios = <&gpio0 13 0>; >> + }; >> + }; >> + >> +}; >> + >> diff --git a/target/linux/ramips/dts/HiWiFi-HC5861.dts >> b/target/linux/ramips/dts/HiWiFi-HC5861.dts >> new file mode 100644 >> index 0000000..2d68e69 >> --- /dev/null >> +++ b/target/linux/ramips/dts/HiWiFi-HC5861.dts >> @@ -0,0 +1,203 @@ >> +/dts-v1/; >> + >> +/include/ "mt7620a.dtsi" >> + >> +/ { >> + compatible = "HiWiFi-HC5861", "ralink,mt7620a-soc"; >> + model = "HiWiFi HC5861"; >> + >> + chosen { >> + bootargs = "console=ttyS0,115200"; >> + }; >> + >> + palmbus@10000000 { >> + sysc@0 { >> + ralink,gpiomux = "i2c", "jtag"; >> + ralink,uartmux = "gpio"; >> + ralink,wdtmux = <1>; >> + }; >> + gpio0: gpio@600 { >> + status = "okay"; >> + }; >> + gpio2: gpio@660 { >> + status = "okay"; >> + }; >> + gpio3: gpio@688 { >> + status = "okay"; >> + }; >> + >> + spi@b00 { >> + status = "okay"; >> + >> + m25p80@0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "w25q128"; >> + reg = <0 0>; >> + linux,modalias = "m25p80", "w25q128"; >> + spi-max-frequency = <10000000>; >> + >> + partition@0 { >> + label = "u-boot"; >> + reg = <0x0 0x30000>; >> + }; >> + >> + partition@30000 { >> + label = "u-boot-env"; >> + reg = <0x30000 0x10000>; >> + read-only; >> + }; >> + >> + factory: partition@40000 { >> + label = "factory"; >> + reg = <0x40000 0x10000>; >> + }; >> + >> + partition@50000 { >> + label = "firmware"; >> + reg = <0x50000 0xf80000>; >> + }; >> + >> + partition@fd0000 { >> + label = "hwf_config"; >> + reg = <0xfd0000 0x10000>; >> + }; >> + >> + bdinfo: partition@fe0000 { >> + label = "bdinfo"; >> + reg = <0xfe0000 0x10000>; >> + }; >> + >> + partition@ff0000 { >> + label = "backup"; >> + reg = <0xff0000 0x10000>; >> + }; >> + }; >> + }; >> + }; >> + >> + ehci@101c0000 { >> + status = "okay"; >> + }; >> + >> + ohci@101c1000 { >> + status = "okay"; >> + }; >> + >> + ethernet@10100000 { >> + status = "okay"; >> + mtd-mac-address = <&factory 0x4>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; >> + >> + ralink,port-map = "wllll"; >> + >> + port@4 { >> + status = "okay"; >> + phy-handle = <&phy4>; >> + phy-mode = "rgmii"; >> + }; >> + >> + port@5 { >> + status = "okay"; >> + phy-handle = <&phy5>; >> + phy-mode = "rgmii"; >> + }; >> + >> + mdio-bus { >> + status = "okay"; >> + >> + phy4: ethernet-phy@4 { >> + reg = <4>; >> + phy-mode = "rgmii"; >> + }; >> + >> + phy5: ethernet-phy@5 { >> + reg = <5>; >> + phy-mode = "rgmii"; >> + }; >> + }; >> + }; >> + >> + gsw@10110000 { >> + ralink,port4 = "gmac"; >> + }; >> + >> + sdhci@10130000 { >> + status = "okay"; >> + }; >> + >> + wmac@10180000 { >> + ralink,mtd-eeprom = <&factory 0>; >> + }; >> + >> + pcie@10140000 { >> + status = "okay"; >> + }; >> + >> + pinctrl { >> + state_default: pinctrl0 { >> + gpio { >> + ralink,group = "uartf", "wled", "nd_sd"; >> + ralink,function = "gpio"; >> + }; >> + pa { >> + ralink,group = "pa"; >> + ralink,function = "pa"; >> + }; >> + }; >> + }; >> + >> + gpio-leds { >> + compatible = "gpio-leds"; >> + system { >> + label = "hiwifi-5861:blue:system"; >> + gpios = <&gpio0 9 1>; >> + }; >> + wlan2p4 { >> + label = "hiwifi-5861:blue:wlan-2p4"; >> + gpios = <&gpio0 11 1>; >> + }; >> + internet { >> + label = "hiwifi-5861:blue:internet"; >> + gpios = <&gpio3 0 1>; >> + }; >> + wlan5p { >> + label = "hiwifi-5861:blue:wlan-5p"; >> + gpios = <&gpio0 7 1>; >> + }; >> + turbo { >> + label = "hiwifi-5861:blue:turbo"; >> + gpios = <&gpio0 10 1>; >> + }; >> + }; >> + >> + gpio-keys-polled { >> + compatible = "gpio-keys-polled"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + poll-interval = <20>; >> + reset { >> + label = "reset"; >> + gpios = <&gpio0 12 1>; >> + linux,code = <0x198>; >> + }; >> + }; >> + >> + gpio_export { >> + compatible = "gpio-export"; >> + #size-cells = <0>; >> + usbpower { >> + gpio-export,name = "usbpower"; >> + gpio-export,output = <0>; >> + gpios = <&gpio0 13 0>; >> + }; >> + sdpower { >> + gpio-export,name = "sdpower"; >> + gpio-export,output = <0>; >> + gpios = <&gpio0 8 0>; >> + }; >> + }; >> + >> +}; >> + >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel