On 15/10/2015 17:49, Andrew Gaylo wrote: > from: Andrew Gaylo <ad...@clisystems.com> > > This submission is for support of the NixCore X1 board at > http://nixcores.com. This board uses the RT5350 Ralink processor > already supported by a number of boards in the OpenWRT repository. > > Signed-off-by: Andrew Gaylo <ad...@clisystems.com>
i think the dts file is missing > --- > diff -uprN > openwrt_vanilla/target/linux/ramips/base-files/etc/board.d/02_network > openwrt_submit/target/linux/ramips/base-files/etc/board.d/02_network > --- > openwrt_vanilla/target/linux/ramips/base-files/etc/board.d/02_network > 2015-10-13 11:10:15.784957130 -0600 > +++ > openwrt_submit/target/linux/ramips/base-files/etc/board.d/02_network > 2015-10-15 08:35:48.341341581 -0600 > @@ -217,7 +217,7 @@ ramips_setup_interfaces() > ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4" > ucidef_add_switch_vlan "switch0" "2" "0t 5" > ;; > - > + nixcorex1 |\ > vocore) > ucidef_set_interface_lan "eth0.1" > ucidef_add_switch "switch0" "1" "1" > diff -uprN openwrt_vanilla/target/linux/ramips/base-files/lib/ramips.sh > openwrt_submit/target/linux/ramips/base-files/lib/ramips.sh > --- openwrt_vanilla/target/linux/ramips/base-files/lib/ramips.sh > 2015-10-13 11:10:15.784957130 -0600 > +++ openwrt_submit/target/linux/ramips/base-files/lib/ramips.sh > 2015-10-15 08:36:21.021340613 -0600 > @@ -232,6 +232,9 @@ ramips_board_detect() { > *"Nexx WT3020") > name="wt3020" > ;; > + *"NixcoreX1") > + name="nixcorex1" > + ;; > *"NW718") > name="nw718" > ;; > diff -uprN > openwrt_vanilla/target/linux/ramips/base-files/lib/upgrade/platform.sh > openwrt_submit/target/linux/ramips/base-files/lib/upgrade/platform.sh > --- > openwrt_vanilla/target/linux/ramips/base-files/lib/upgrade/platform.sh > 2015-10-13 > 11:10:15.784957130 -0600 > +++ > openwrt_submit/target/linux/ramips/base-files/lib/upgrade/platform.sh > 2015-10-15 08:37:00.029339459 -0600 > @@ -72,6 +72,7 @@ platform_check_image() { > mr-102n | \ > mzk-w300nh2 | \ > nbg-419n | \ > + nixcorex1 | \ > nw718 | \ > omni-emb | \ > omni-emb-hpm | \ > diff -uprN openwrt_vanilla/target/linux/ramips/image/Makefile > openwrt_submit/target/linux/ramips/image/Makefile > --- openwrt_vanilla/target/linux/ramips/image/Makefile 2015-10-13 > 11:10:15.788957130 -0600 > +++ openwrt_submit/target/linux/ramips/image/Makefile 2015-10-15 > 08:37:25.885338693 -0600 > @@ -569,6 +569,8 @@ Image/Build/Profile/MZKW300NH2=$(call Bu > > Image/Build/Profile/NCS601W=$(call > BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W) > > +Image/Build/Profile/NIXCORE-X1=$(call > BuildFirmware/Default8M/$(1),$(1),nixcorex1,NIXCORE-X1) > + > nw718_mtd_size=3801088 > Image/Build/Profile/NW718=$(call > BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory) > > > @@ -741,6 +743,7 @@ define Image/Build/Profile/Default > $(call Image/Build/Profile/MZKW300NH2,$(1)) > $(call Image/Build/Profile/NBG-419N,$(1)) > $(call Image/Build/Profile/NCS601W,$(1)) > + $(call Image/Build/Profile/NIXCORE-X1,$(1)) > $(call Image/Build/Profile/NW718,$(1)) > $(call Image/Build/Profile/OMNI-EMB,$(1)) > $(call Image/Build/Profile/OMNI-PLUG,$(1)) > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel