I have one as well torn apart on hooked to serial; I started a port but couldn't figure out how to get the bootloader to write my image via tftp to flash. I tricked it by modifying the magic header, so the tftp portion would happen but then It looked like it ran a ubnt script within their custom u-boot build; which did some sort of RSA check and failed.
I ended up using dd on the stock UniFi firmware and just forcing it to write to the kernel0 partition; Even with boot ${address_of_kernel}; I would get an error and it would automatically boot into the backup partition. I didn't want to brick my board completely; so I left kernel1 in-tact so I could always have a way to revert it. Let me know if you find any information; :-) I can't wait to help. -- Davey On Thu, Dec 10, 2015 at 10:14 AM, Andrew Margarit | Cucumber WiFI <and...@polkaspots.com> wrote: > I'm digging for the same info :) > Have one near me so can give a hand out with the profile. > > Andrew > > > On 10/12/15 17:06, David Hutchison wrote: >> >> I would like to know as well, >> >> It looks like they made a lot of progress; are patchsets available to >> build the "openwrt-ar71xx-generic-ubnt-unifiac-squashfs-sysupgrade.bin" >> ? >> >> Any information would be much appreciated. >> >> -- Davey >> >> On Wed, Dec 9, 2015 at 9:33 AM, Andrew Margarit | Cucumber WiFI >> <and...@polkaspots.com> wrote: >>> >>> Does anyone know who's maintaining this page? >>> >>> https://wiki.openwrt.org/toh/ubiquiti/unifiac >>> >>> Want to give out a hand with that porting. >>> >>> Cheers, >>> A >>> _______________________________________________ >>> openwrt-devel mailing list >>> openwrt-devel@lists.openwrt.org >>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel