Hi, the patch is badly formatted. please read the SubmittingPatches howto. things to look out for are
* subject prefix * description that reflects hte actual patch content * your signed-off line is at the end of the patch. please put it above the tear line instead. you should consider using "git send-email" to submit patches. John On 24/12/2015 08:54, x...@wrtnode.com wrote: > Hi blogic > > this is a patch is add WRTnode2P and WRTnode2R support by OpenWrt > > commit d0f7a56ed622a488926bb1705686b950dea34cce > Author: xzmu <x...@wrtnode.com> > Date: Thu Dec 24 15:30:07 2015 +0800 > > add support for WRTnode2P and WRTnode2R > add led indicator support for WRTnode platform > > diff --git a/target/linux/ramips/base-files/etc/board.d/02_network > b/target/linux/ramips/base-files/etc/board.d/02_network > index d7d016b..816a1a7 100755 > --- a/target/linux/ramips/base-files/etc/board.d/02_network > +++ b/target/linux/ramips/base-files/etc/board.d/02_network > @@ -175,6 +175,8 @@ ramips_setup_interfaces() > hg255d | \ > rt-n14u | \ > wrtnode | \ > + wrtnode2p | \ > + wrtnode2r | \ > wt3020 | \ > ur-326n4g | \ > zbt-wa05) > diff --git a/target/linux/ramips/base-files/etc/diag.sh > b/target/linux/ramips/base-files/etc/diag.sh > index a7e2501..d596b8a 100644 > --- a/target/linux/ramips/base-files/etc/diag.sh > +++ b/target/linux/ramips/base-files/etc/diag.sh > @@ -253,6 +253,11 @@ get_status_led() { > zte-q7) > status_led="zte:red:status" > ;; > + wrtnode2r | \ > + wrtnode2p | \ > + wrtnode) > + status_led="wrtnode:blue:indicator" > + ;; > esac > } > > diff --git a/target/linux/ramips/base-files/lib/ramips.sh > b/target/linux/ramips/base-files/lib/ramips.sh > index 4141ddd..6c74412 100755 > --- a/target/linux/ramips/base-files/lib/ramips.sh > +++ b/target/linux/ramips/base-files/lib/ramips.sh > @@ -391,6 +391,12 @@ ramips_board_detect() { > *"WRTNODE") > name="wrtnode" > ;; > + *"WRTnode2R") > + name="wrtnode2r" > + ;; > + *"WRTnode2P") > + name="wrtnode2p" > + ;; > *"Wansview NCS601W") > name="ncs601w" > ;; > diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh > b/target/linux/ramips/base-files/lib/upgrade/platform.sh > index 2f64d8c..0fc5c26 100755 > --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh > +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh > @@ -119,6 +119,8 @@ platform_check_image() { > wr6202 |\ > wr8305rt |\ > wrtnode |\ > + wrtnode2r |\ > + wrtnode2p |\ > wt1520 |\ > wt3020 |\ > x5 |\ > diff --git a/target/linux/ramips/dts/WRTNODE2P.dts > b/target/linux/ramips/dts/WRTNODE2P.dts > new file mode 100644 > index 0000000..59866dd > --- /dev/null > +++ b/target/linux/ramips/dts/WRTNODE2P.dts > @@ -0,0 +1,99 @@ > +/dts-v1/; > + > +/include/ "mt7628an.dtsi" > + > +/ { > + compatible = "mediatek,wrtnode2p", "mediatek,mt7628an-soc"; > + model = "WRTnode2P"; > + > + chosen { > + bootargs = "console=ttyS0,115200"; > + }; > + > + pinctrl { > + state_default: pinctrl0 { > + gpio { > + ralink,group = "i2c", "gpio", "jtag"; > + ralink,function = "gpio"; > + }; > + }; > + }; > + > + palmbus@10000000 { > + spi@b00 { > + status = "okay"; > + > + m25p80@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "w25q256"; > + reg = <0 0>; > + linux,modalias = "m25p80", "w25q256"; > + spi-max-frequency = <10000000>; > + m25p,chunked-io = <32>; > + > + partition@0 { > + label = "u-boot"; > + reg = <0x0 0x30000>; > + read-only; > + }; > + > + partition@30000 { > + label = "u-boot-env"; > + reg = <0x30000 0x10000>; > + read-only; > + }; > + > + factory: partition@40000 { > + label = "factory"; > + reg = <0x40000 0x10000>; > + read-only; > + }; > + > + partition@50000 { > + label = "firmware"; > + reg = <0x50000 0x1fb0000>; > + }; > + }; > + }; > + > + uart1@d00 { > + status = "okay"; > + }; > + > + }; > + > + ethernet@10100000 { > + mtd-mac-address = <&factory 0x4>; > + ralink,port-map = "llllw"; > + }; > + > + sdhci@10130000 { > + status = "okay"; > + }; > + > + pcie@10140000 { > + status = "okay"; > + }; > + > + gpio-leds { > + compatible = "gpio-leds"; > + indicator { > + label = "wrtnode:blue:indicator"; > + gpios = <&gpio1 9 1>; > + }; > + }; > + > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + #address-cells = <1>; > + #size-cells = <0>; > + poll-interval = <20>; > + reset { > + label = "reset"; > + gpios = <&gpio0 5 1>; > + linux,code = <0x198>; > + }; > + }; > +}; > + > diff --git a/target/linux/ramips/dts/WRTNODE2R.dts > b/target/linux/ramips/dts/WRTNODE2R.dts > new file mode 100644 > index 0000000..7f383ad > --- /dev/null > +++ b/target/linux/ramips/dts/WRTNODE2R.dts > @@ -0,0 +1,114 @@ > +/dts-v1/; > + > +/include/ "mt7628an.dtsi" > + > +/ { > + compatible = "mediatek,wrtnode2r", "mediatek,mt7628an-soc"; > + model = "WRTnode2R"; > + > + chosen { > + bootargs = "console=ttyS0,115200"; > + }; > + > + pinctrl { > + state_default: pinctrl0 { > + gpio { > + ralink,group = "i2c", "gpio", "wled_an"; > + ralink,function = "gpio"; > + }; > + }; > + }; > + > + palmbus@10000000 { > + spi@b00 { > + status = "okay"; > + > + m25p80@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "w25q256"; > + reg = <0 0>; > + linux,modalias = "m25p80", "w25q256"; > + spi-max-frequency = <10000000>; > + m25p,chunked-io = <32>; > + > + partition@0 { > + label = "u-boot"; > + reg = <0x0 0x30000>; > + read-only; > + }; > + > + partition@30000 { > + label = "u-boot-env"; > + reg = <0x30000 0x10000>; > + read-only; > + }; > + > + factory: partition@40000 { > + label = "factory"; > + reg = <0x40000 0x10000>; > + read-only; > + }; > + > + partition@50000 { > + label = "firmware"; > + reg = <0x50000 0x1fb0000>; > + }; > + }; > + > + > + spidev@1 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "spidev"; > + reg = <1 0>; > + linux,modalias = "spidev", "spidev"; > + spi-max-frequency = <10000000>; > + }; > + }; > + > + uart1@d00 { > + status = "okay"; > + }; > + > + i2c@900 { > + status = "okay"; > + }; > + > + }; > + > + ethernet@10100000 { > + mtd-mac-address = <&factory 0x4>; > + ralink,port-map = "llllw"; > + }; > + > + sdhci@10130000 { > + status = "okay"; > + }; > + > + pcie@10140000 { > + status = "okay"; > + }; > + > + gpio-leds { > + compatible = "gpio-leds"; > + indicator { > + label = "wrtnode:blue:indicator"; > + gpios = <&gpio1 12 1>; > + }; > + }; > + > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + #address-cells = <1>; > + #size-cells = <0>; > + poll-interval = <20>; > + reset { > + label = "reset"; > + gpios = <&gpio0 5 1>; > + linux,code = <0x198>; > + }; > + }; > + > +}; > + > > > Signed-off-by: xzmu <x...@wrtnode.com> > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel