Hi John,
I don't why it did't reach. I sent it using git command and I got a copy that of email. I also kept you in cc list. Regards, Tatha On 25-12-2015 13:19, John Crispin wrote: > On 24/12/2015 17:55, Tathagata Das wrote: > >> Thank you for help John. >> >> I have followed those step and send the patch again. Please check. > > well, we never received that mail i am afraid. > > John > > On 24-12-2015 21:24, John Crispin wrote: > > hi > > first format the patch > > git format-patch HEAD~1 > > this will give you your patch as 0001-$some_name.patch > > then call this command to send the patch > > git send-email --to openwrt-devel@lists.openwrt.org > <mailto:openwrt-devel@lists.openwrt.org> 0001-my_fix.patch > > John > > On 24/12/2015 14:31, Tathagata Das wrote: > > I have tried with git -send-email option. But it says command not > supported. Could you send me the command? > > On 24-12-2015 18:48, John Crispin wrote: > > Hi, > > your mail client replaced all tabs with spaces. > > please consider using git to send patches. it will save you a lot of > time. > > John > > On 24/12/2015 11:21, Tathagata Das wrote: Add support for the Netgear D7800 > and build appropriate sysupgrade and > factory images. > > Known issues: > . USB ports are not working > . DSL is not added > > Signed-off-by: Tathagata Das <tathag...@alumnux.com > <mailto:tathag...@alumnux.com> > <mailto:tathag...@alumnux.com <mailto:tathag...@alumnux.com>>> > > ---- > > From 41487fc5f03abbd24c1a979c1c0e59a5f7da2898 Mon Sep 17 00:00:00 2001 From: > Tathagata Das <tathag...@alumnux.com > <mailto:tathag...@alumnux.com> > <mailto:tathag...@alumnux.com <mailto:tathag...@alumnux.com>>> > Date: Thu, 24 Dec 2015 09:44:01 +0530 > Subject: [PATCH] Added support for Netgear D7800 > Signed-off-by: Tathagata Das <tathag...@alumnux.com > <mailto:tathag...@alumnux.com> > <mailto:tathag...@alumnux.com <mailto:tathag...@alumnux.com>>> > > --- > .../linux/ipq806x/base-files/etc/board.d/01_leds | 1 + > .../ipq806x/base-files/etc/board.d/02_network | 1 + > target/linux/ipq806x/base-files/lib/ipq806x.sh | 3 + > .../ipq806x/base-files/lib/upgrade/platform.sh | 2 + > target/linux/ipq806x/image/Makefile | 13 +- > ...dd-Netgear-Nighthawk-X4-D7800-device-tree.patch | 381 > ++++++++++++++++++++ > target/linux/ipq806x/profiles/netgear.mk | 14 + > 7 files changed, 414 insertions(+), 1 deletions(-) > create mode 100644 > target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch > > diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds > b/target/linux/ipq806x/base-files/etc/board.d/01_leds > index 07b5b06..b32c1cc 100755 > --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds > +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds > @@ -11,6 +11,7 @@ board_config_update > board=$(ipq806x_board_name) > > case "$board" in > +d7800 |\ > r7500) > ucidef_set_led_usbdev "usb1" "USB 1" "r7500:white:usb1" "1-1" > ucidef_set_led_usbdev "usb2" "USB 2" "r7500:white:usb3" "3-1" > diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network > b/target/linux/ipq806x/base-files/etc/board.d/02_network > index 1302a55..6e18297 100755 > --- a/target/linux/ipq806x/base-files/etc/board.d/02_network > +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network > @@ -13,6 +13,7 @@ board=$(ipq806x_board_name) > > case "$board" in > ap148 |\ > +d7800 |\ > r7500) > ucidef_add_switch "switch0" \ > "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1 <mailto:6@eth1> > <mailto:6@eth1 <mailto:6@eth1>>" > "5:wan" "0@eth0 <mailto:0@eth0> <mailto:0@eth0 <mailto:0@eth0>>" > diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh > b/target/linux/ipq806x/base-files/lib/ipq806x.sh > index 5b27bde..be48b9f 100644 > --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh > +++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh > @@ -20,6 +20,9 @@ ipq806x_board_detect() { > *"DB149") > name="db149" > ;; > + *"D7800") > + name="d7800" > + ;; > *"R7500") > name="r7500" > ;; > diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh > b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh > index c0e19a1..2400376 100644 > --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh > +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh > @@ -7,6 +7,7 @@ platform_check_image() { > > case "$board" in > AP148 |\ > + d7800 |\ > r7500) > nand_do_platform_check $board $1 > return $?; > @@ -21,6 +22,7 @@ platform_pre_upgrade() { > > case "$board" in > AP148 |\ > + d7800 |\ > r7500) > nand_do_upgrade "$1" > ;; > diff --git a/target/linux/ipq806x/image/Makefile > b/target/linux/ipq806x/image/Makefile > index 14cf442..8f46af8 100644 > --- a/target/linux/ipq806x/image/Makefile > +++ b/target/linux/ipq806x/image/Makefile > @@ -121,6 +121,17 @@ define Device/R7500 > BOARD_NAME := r7500 > endef > > -TARGET_DEVICES += AP148 AP148-legacy DB149 R7500 > +define Device/D7800 > + $(call Device/DniImage) > + DEVICE_DTS := qcom-ipq8064-d7800 > + KERNEL_SIZE := 2097152 > + NETGEAR_BOARD_ID := D7800 > + NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4 > + BLOCKSIZE := 128KiB > + PAGESIZE := 2048 > + BOARD_NAME := d7800 > +endef > + > +TARGET_DEVICES += AP148 AP148-legacy DB149 R7500 D7800 > > $(eval $(call BuildImage)) > diff --git > a/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch > b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch > > new file mode 100644 > index 0000000..ecc1cff > --- /dev/null > +++ > b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch > > @@ -0,0 +1,381 @@ > +--- a/arch/arm/boot/dts/Makefile 2015-09-22 18:30:09.033530282 > +0530 > ++++ b/arch/arm/boot/dts/Makefile 2015-09-23 17:06:44.892947581 > +0530 > +@@ -362,6 +362,7 @@ > + qcom-ipq8064-ap148.dtb \ > + qcom-ipq8064-db149.dtb \ > + qcom-ipq8064-r7500.dtb \ > ++ qcom-ipq8064-d7800.dtb \ > + qcom-msm8660-surf.dtb \ > + qcom-msm8960-cdp.dtb \ > + qcom-msm8974-sony-xperia-honami.dtb > +--- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts 1970-01-01 > 05:30:00.000000000 +0530 > ++++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts 2015-09-23 > 17:06:45.336947567 +0530 > +@@ -0,0 +1,368 @@ > ++#include "qcom-ipq8064-v1.0.dtsi" > ++ > ++#include <dt-bindings/input/input.h> > ++ > ++/ { > ++ model = "Netgear Nighthawk X4 D7800"; > ++ compatible = "netgear,d7800", "qcom,ipq8064"; > ++ > ++ memory@0 { > ++ reg = <0x42000000 0xe000000>; > ++ device_type = "memory"; > ++ }; > ++ > ++ reserved-memory { > ++ #address-cells = <1>; > ++ #size-cells = <1>; > ++ ranges; > ++ rsvd@41200000 <mailto:rsvd@41200000> > <mailto:rsvd@41200000 <mailto:rsvd@41200000>> { > ++ reg = <0x41200000 0x300000>; > ++ no-map; > ++ }; > ++ }; > ++ > ++ aliases { > ++ serial0 = &uart4; > ++ mdio-gpio0 = &mdio0; > ++ }; > ++ > ++ chosen { > ++ bootargs = "rootfstype=squashfs noinitrd"; > ++ linux,stdout-path = "serial0:115200n8"; > ++ }; > ++ > ++ soc { > ++ pinmux@800000 <mailto:pinmux@800000> > <mailto:pinmux@800000 <mailto:pinmux@800000>> { > ++ i2c4_pins: i2c4_pinmux { > ++ pins = "gpio12", "gpio13"; > ++ function = "gsbi4"; > ++ bias-disable; > ++ }; > ++ > ++ pcie0_pins: pcie0_pinmux { > ++ mux { > ++ pins = "gpio3"; > ++ function = "pcie1_rst"; > ++ drive-strength = <12>; > ++ bias-disable; > ++ }; > ++ }; > ++ > ++ pcie1_pins: pcie1_pinmux { > ++ mux { > ++ pins = "gpio48"; > ++ function = "pcie2_rst"; > ++ drive-strength = <12>; > ++ bias-disable; > ++ }; > ++ }; > ++ > ++ nand_pins: nand_pins { > ++ mux { > ++ pins = "gpio34", "gpio35", "gpio36", > ++ "gpio37", "gpio38", "gpio39", > ++ "gpio40", "gpio41", "gpio42", > ++ "gpio43", "gpio44", "gpio45", > ++ "gpio46", "gpio47"; > ++ function = "nand"; > ++ drive-strength = <10>; > ++ bias-disable; > ++ }; > ++ pullups { > ++ pins = "gpio39"; > ++ bias-pull-up; > ++ }; > ++ hold { > ++ pins = "gpio40", "gpio41", "gpio42", > ++ "gpio43", "gpio44", "gpio45", > ++ "gpio46", "gpio47"; > ++ bias-bus-hold; > ++ }; > ++ }; > ++ > ++ mdio0_pins: mdio0_pins { > ++ mux { > ++ pins = "gpio0", "gpio1"; > ++ function = "gpio"; > ++ drive-strength = <8>; > ++ bias-disable; > ++ }; > ++ }; > ++ > ++ rgmii2_pins: rgmii2_pins { > ++ mux { > ++ pins = "gpio27", "gpio28", "gpio29", "gpio30", > "gpio31", "gpio32", > ++ "gpio51", "gpio52", "gpio59", "gpio60", > "gpio61", "gpio62" ; > ++ function = "rgmii2"; > ++ drive-strength = <8>; > ++ bias-disable; > ++ }; > ++ }; > ++ }; > ++ > ++ gsbi@16300000 <mailto:gsbi@16300000> > <mailto:gsbi@16300000 <mailto:gsbi@16300000>> { > ++ qcom,mode = <GSBI_PROT_I2C_UART>; > ++ status = "ok"; > ++ serial@16340000 <mailto:serial@16340000> > <mailto:serial@16340000 <mailto:serial@16340000>> { > ++ status = "ok"; > ++ }; > ++ /* > ++ * The i2c device on gsbi4 should not be enabled. > ++ * On ipq806x designs gsbi4 i2c is meant for exclusive > ++ * RPM usage. Turning this on in kernel manifests as > ++ * i2c failure for the RPM. > ++ */ > ++ }; > ++ > ++ sata-phy@1b400000 <mailto:sata-phy@1b400000> > <mailto:sata-phy@1b400000 <mailto:sata-phy@1b400000>> { > ++ status = "ok"; > ++ }; > ++ > ++ sata@29000000 <mailto:sata@29000000> > <mailto:sata@29000000 <mailto:sata@29000000>> { > ++ status = "ok"; > ++ }; > ++ > ++ phy@100f8800 <mailto:phy@100f8800> <mailto:phy@100f8800 > <mailto:phy@100f8800>> { /* USB3 port 1 > HS phy */ > ++ status = "ok"; > ++ }; > ++ > ++ phy@100f8830 <mailto:phy@100f8830> <mailto:phy@100f8830 > <mailto:phy@100f8830>> { /* USB3 port 1 > SS phy */ > ++ status = "ok"; > ++ }; > ++ > ++ phy@110f8800 <mailto:phy@110f8800> <mailto:phy@110f8800 > <mailto:phy@110f8800>> { /* USB3 port 0 > HS phy */ > ++ status = "ok"; > ++ }; > ++ > ++ phy@110f8830 <mailto:phy@110f8830> <mailto:phy@110f8830 > <mailto:phy@110f8830>> { /* USB3 port 0 > SS phy */ > ++ status = "ok"; > ++ }; > ++ > ++ usb30@0 { > ++ status = "ok"; > ++ }; > ++ > ++ usb30@1 { > ++ status = "ok"; > ++ }; > ++ > ++ pcie0: pci@1b500000 <mailto:pci@1b500000> > <mailto:pci@1b500000 <mailto:pci@1b500000>> { > ++ status = "ok"; > ++ reset-gpio = <&qcom_pinmux 3 0>; > ++ pinctrl-0 = <&pcie0_pins>; > ++ pinctrl-names = "default"; > ++ }; > ++ > ++ pcie1: pci@1b700000 <mailto:pci@1b700000> > <mailto:pci@1b700000 <mailto:pci@1b700000>> { > ++ status = "ok"; > ++ reset-gpio = <&qcom_pinmux 48 0>; > ++ pinctrl-0 = <&pcie1_pins>; > ++ pinctrl-names = "default"; > ++ }; > ++ > ++ nand@1ac00000 <mailto:nand@1ac00000> > <mailto:nand@1ac00000 <mailto:nand@1ac00000>> { > ++ status = "ok"; > ++ > ++ pinctrl-0 = <&nand_pins>; > ++ pinctrl-names = "default"; > ++ > ++ nand-ecc-strength = <4>; > ++ nand-bus-width = <8>; > ++ > ++ #address-cells = <1>; > ++ #size-cells = <1>; > ++ > ++ qcadata@0 { > ++ label = "qcadata"; > ++ reg = <0x0000000 0x0c80000>; > ++ read-only; > ++ }; > ++ > ++ APPSBL@c80000 <mailto:APPSBL@c80000> > <mailto:APPSBL@c80000 <mailto:APPSBL@c80000>> { > ++ label = "APPSBL"; > ++ reg = <0x0c80000 0x0500000>; > ++ read-only; > ++ }; > ++ > ++ APPSBLENV@1180000 <mailto:APPSBLENV@1180000> > <mailto:APPSBLENV@1180000 <mailto:APPSBLENV@1180000>> { > ++ label = "APPSBLENV"; > ++ reg = <0x1180000 0x0080000>; > ++ read-only; > ++ }; > ++ > ++ art: art@1200000 <mailto:art@1200000> > <mailto:art@1200000 <mailto:art@1200000>> { > ++ label = "art"; > ++ reg = <0x1200000 0x0140000>; > ++ read-only; > ++ }; > ++ > ++ artbak: art@1340000 <mailto:art@1340000> > <mailto:art@1340000 <mailto:art@1340000>> { > ++ label = "artbak"; > ++ reg = <0x1340000 0x0140000>; > ++ read-only; > ++ }; > ++ > ++ kernel@1480000 <mailto:kernel@1480000> > <mailto:kernel@1480000 <mailto:kernel@1480000>> { > ++ label = "kernel"; > ++ reg = <0x1480000 0x0200000>; > ++ }; > ++ > ++ ubi@1680000 <mailto:ubi@1680000> <mailto:ubi@1680000 > <mailto:ubi@1680000>> { > ++ label = "ubi"; > ++ reg = <0x1680000 0x1E00000>; > ++ }; > ++ > ++ netgear@3480000 <mailto:netgear@3480000> > <mailto:netgear@3480000 <mailto:netgear@3480000>> { > ++ label = "netgear"; > ++ reg = <0x3480000 0x4480000>; > ++ read-only; > ++ }; > ++ > ++ reserve@7900000 <mailto:reserve@7900000> > <mailto:reserve@7900000 <mailto:reserve@7900000>> { > ++ label = "reserve"; > ++ reg = <0x7900000 0x0700000>; > ++ read-only; > ++ }; > ++ > ++ firmware@1480000 <mailto:firmware@1480000> > <mailto:firmware@1480000 <mailto:firmware@1480000>> { > ++ label = "firmware"; > ++ reg = <0x1480000 0x2000000>; > ++ }; > ++ > ++ }; > ++ > ++ mdio0: mdio { > ++ compatible = "virtual,mdio-gpio"; > ++ #address-cells = <1>; > ++ #size-cells = <0>; > ++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; > ++ pinctrl-0 = <&mdio0_pins>; > ++ pinctrl-names = "default"; > ++ > ++ phy0: ethernet-phy@0 { > ++ device_type = "ethernet-phy"; > ++ reg = <0>; > ++ qca,ar8327-initvals = < > ++ 0x00004 0x7600000 /* PAD0_MODE */ > ++ 0x00008 0x1000000 /* PAD5_MODE */ > ++ 0x0000c 0x80 /* PAD6_MODE */ > ++ 0x000e4 0xaa545 /* MAC_POWER_SEL */ > ++ 0x000e0 0xc74164de /* SGMII_CTRL */ > ++ 0x0007c 0x4e /* PORT0_STATUS */ > ++ 0x00094 0x4e /* PORT6_STATUS */ > ++ >; > ++ }; > ++ > ++ phy4: ethernet-phy@4 { > ++ device_type = "ethernet-phy"; > ++ reg = <4>; > ++ }; > ++ }; > ++ > ++ gmac1: ethernet@37200000 <mailto:ethernet@37200000> > <mailto:ethernet@37200000 <mailto:ethernet@37200000>> { > ++ status = "ok"; > ++ phy-mode = "rgmii"; > ++ phy-handle = <&phy4>; > ++ qcom,id = <1>; > ++ > ++ pinctrl-0 = <&rgmii2_pins>; > ++ pinctrl-names = "default"; > ++ > ++ mtd-mac-address = <&art 6>; > ++ }; > ++ > ++ gmac2: ethernet@37400000 <mailto:ethernet@37400000> > <mailto:ethernet@37400000 <mailto:ethernet@37400000>> { > ++ status = "ok"; > ++ phy-mode = "sgmii"; > ++ qcom,id = <2>; > ++ > ++ mtd-mac-address = <&art 0>; > ++ > ++ fixed-link { > ++ speed = <1000>; > ++ full-duplex; > ++ }; > ++ }; > ++ }; > ++ > ++ gpio-keys { > ++ compatible = "gpio-keys"; > ++ > ++ wifi { > ++ label = "wifi"; > ++ gpios = <&qcom_pinmux 6 1>; > ++ linux,code = <KEY_WLAN>; > ++ }; > ++ > ++ reset { > ++ label = "reset"; > ++ gpios = <&qcom_pinmux 54 1>; > ++ linux,code = <KEY_RESTART>; > ++ }; > ++ > ++ wps { > ++ label = "wps"; > ++ gpios = <&qcom_pinmux 65 1>; > ++ linux,code = <KEY_WPS_BUTTON>; > ++ }; > ++ }; > ++ > ++ gpio-leds { > ++ compatible = "gpio-leds"; > ++ > ++ usb1 { > ++ label = "d7800:amber:usb1"; > ++ gpios = <&qcom_pinmux 7 0>; > ++ }; > ++ > ++ usb3 { > ++ label = "d7800:amber:usb3"; > ++ gpios = <&qcom_pinmux 8 0>; > ++ }; > ++ > ++ status { > ++ label = "d7800:amber:status"; > ++ gpios = <&qcom_pinmux 9 0>; > ++ }; > ++ > ++ internet { > ++ label = "d7800:white:internet"; > ++ gpios = <&qcom_pinmux 22 0>; > ++ }; > ++ > ++ wan { > ++ label = "d7800:white:wan"; > ++ gpios = <&qcom_pinmux 23 0>; > ++ }; > ++ > ++ wps { > ++ label = "d7800:white:wps"; > ++ gpios = <&qcom_pinmux 24 0>; > ++ }; > ++ > ++ esata { > ++ label = "d7800:white:esata"; > ++ gpios = <&qcom_pinmux 26 0>; > ++ }; > ++ > ++ power { > ++ label = "d7800:white:power"; > ++ gpios = <&qcom_pinmux 53 0>; > ++ default-state = "on"; > ++ }; > ++ > ++ rfkill { > ++ label = "d7800:white:rfkill"; > ++ gpios = <&qcom_pinmux 64 0>; > ++ }; > ++ > ++ wifi5g { > ++ label = "d7800:white:wifi5g"; > ++ gpios = <&qcom_pinmux 67 0>; > ++ }; > ++ }; > ++}; > ++ > ++&adm_dma { > ++ status = "ok"; > ++}; > diff --git a/target/linux/ipq806x/profiles/netgear.mk > b/target/linux/ipq806x/profiles/netgear.mk > index 3402f45..e1e7ed2 100644 > --- a/target/linux/ipq806x/profiles/netgear.mk > +++ b/target/linux/ipq806x/profiles/netgear.mk > @@ -17,4 +17,18 @@ endef > define Profile/R7500/Description > Package set for the Netgear Nighthawk X4 R7500. > endef > + > +define Profile/D7800 > + NAME:=Netgear Nighthawk X4 D7800 > + PACKAGES:= \ > + kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \ > + kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \ > + kmod-ath10k wpad-mini ath10k-firmware-qca99x0 > +endef > + > +define Profile/D7800/Description > + Package set for the Netgear Nighthawk X4 D7800. > +endef > + > $(eval $(call Profile,R7500)) > +$(eval $(call Profile,D7800)) _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel [1] Links: ------ [1] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel