On 2015-12-25 19:08, Josh Bendavid wrote: > There is a patch added here to ath10k to bypass some checks on > startup. I believe this is related to the calibration data being > provided in external files (dumped from the ART mtd partition at init > time) rather than directly from the pcie board. The patch and related > discussion is from here: > http://lists.infradead.org/pipermail/ath10k/2015-November/006489.html. > This has also been discussed a bit further on the ath10k list here: > http://lists.infradead.org/pipermail/ath10k/2015-December/006613.html. > > Signed-off-by: Josh Bendavid <joshbenda...@gmail.com> I think the check should only be skipped if loading calibration data succeeded. Actually, in that case it should not even try to fetch the board id.
- Felix _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel