Thanks Jonas. Tested and working OK. It would be nice if the patch is also backported to Chaos Calmer revision.
Regards. 2016-01-18 14:16 GMT+01:00 Jonas Gorski <j...@openwrt.org>: > Hi, > > On 12 December 2015 at 14:10, dani <dgcb...@gmail.com> wrote: > > Currently ephy-reset, which uses a GPIO for enabling external ethernet > phys, is broken. > > This patch fix the problem. > > > > This problem causes in boards with external phys with a reset pin > connected to gpio, are > > initialized without lan interfaces. > > > > The line > > ephy_reset.table[0].chip_label = gpio_chip_labels[hw_gpio / 32]; > > always returns bcm63xx-gpio.1. As a result of this, reset pins connected > to gpios <32 > > will return messages "gpio X out of range", and ethernet fails to > initialize. > > > > The array *gpio_chip_labels[] should be initialized with different names > for each element, > > otherwise sprintf will copy the label of the gpio chip for both elements > at the same time. > > And the name of both elements of the array will be the same. > > > > Using a different name on the second array element solves the problem. > > Signed-off-by: Daniel Gonzalez <dgcb...@gmail.com> > > I added a slightly different approach in r48303, can you verify it > works for you? > > > Jonas >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
