[OpenWrt-Devel] [PATCH 7/8] ath79: fix for random WLAN MAC for WNR2000v3

[Michal]

From: Michal Cieslakiewicz <michal.cieslakiew...@wp.pl>

Fix for invalid/random WLAN MAC address in WNR2000v3. Permanent platform MAC
is calculated and assigned during system startup. WLAN MAC follows wired
Ethernet interface addresses.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiew...@wp.pl>
---
 .../ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c | 30 +++++++++++++++++-----
 1 file changed, 24 insertions(+), 6 deletions(-)

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c 
b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
index 205c2e7..ee6b449 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
@@ -181,7 +181,7 @@ static struct gpio_keys_button wnr2000v3_gpio_keys[] 
__initdata = {
        }
 };
 
-static void __init wnr_common_setup(void)
+static void __init wnr_common_setup(u8 *wmac_addr)
 {
        u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
 
@@ -200,12 +200,30 @@ static void __init wnr_common_setup(void)
        ath79_register_eth(1);
 
        ath79_register_m25p80(NULL);
-       ap91_pci_init(art + WNR2000V3_PCIE_CALDATA_OFFSET, NULL);
+       ap91_pci_init(art + WNR2000V3_PCIE_CALDATA_OFFSET, wmac_addr);
 }
 
 static void __init wnr2000v3_setup(void)
 {
-       wnr_common_setup();
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+       u8 wlan_mac_addr[6];
+       u8 *eth0_mac_addr = (u8 *) (art + WNR2000V3_MAC0_OFFSET);
+       u8 *eth1_mac_addr = (u8 *) (art + WNR2000V3_MAC1_OFFSET);
+
+       /*
+        * For WNR2000v3 ART flash area used for wlan MAC is usually empty 
(0xff)
+        * so ath9k driver uses random MAC instead each time module is loaded.
+        * To fix that, assign permanent wlan MAC equal to ethN's MAC plus 1,
+        * so network interfaces get sequential addresses.
+        */
+       memcpy(wlan_mac_addr, eth0_mac_addr, sizeof(wlan_mac_addr));
+       wlan_mac_addr[5] = (eth0_mac_addr[5] > eth1_mac_addr[5] ?
+                          eth0_mac_addr[5] : eth1_mac_addr[5]) + 1;
+
+       /* Avoid potential conflict in case: max(0xff,0x00)+1==0x00 */
+       if (!wlan_mac_addr[5]) wlan_mac_addr[5] = 1;
+
+       wnr_common_setup(wlan_mac_addr);
 
        ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000v3_leds_gpio),
                                 wnr2000v3_leds_gpio);
@@ -219,7 +237,7 @@ MIPS_MACHINE(ATH79_MACH_WNR2000_V3, "WNR2000V3", "NETGEAR 
WNR2000 V3", wnr2000v3
 
 static void __init wnr612v2_setup(void)
 {
-       wnr_common_setup();
+       wnr_common_setup(NULL);
 
        ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr612v2_leds_gpio),
                                 wnr612v2_leds_gpio);
@@ -229,7 +247,7 @@ MIPS_MACHINE(ATH79_MACH_WNR612_V2, "WNR612V2", "NETGEAR 
WNR612 V2", wnr612v2_set
 
 static void __init wnr1000v2_setup(void)
 {
-       wnr_common_setup();
+       wnr_common_setup(NULL);
 
        ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr1000v2_leds_gpio),
                                 wnr1000v2_leds_gpio);
@@ -247,7 +265,7 @@ static void __init wpn824n_setup(void)
                                  AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN |
                                  AR724X_GPIO_FUNC_CLK_OBS3_EN);
 
-       wnr_common_setup();
+       wnr_common_setup(NULL);
 
        ath79_register_leds_gpio(-1, ARRAY_SIZE(wpn824n_leds_gpio),
                                 wpn824n_leds_gpio);
-- 
2.6.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel