Hi. > In r48800 this file seems to have been replaced by > /etc/board.d/02_network instead. Unfortunately "raw" uci commands does > not work since its generating /etc/board.json instead? Am I correct? > > If I do this then "dhcp" is ignored and the interface is set to static > anyway: > ucidef_set_interface_lan "eth0" "dhcp"
This sounds like a bug to me, it is supposed to work. Please post your used board.d script and the resulting board.json. > How to convert the wireless and the hostname I have no idea? You can still use uci-defaults for that. > Next is led. I had this in /etc/uci-defaults/02_network: > ucidef_set_led_netdev "lan_act" "LANACT" "tellstick:green:lan" "eth0" > ucidef_set_led_netdev "lan_link" "LANLINK" "tellstick:orange:lan" "eth0" > uci set system.led_lan_act.mode='tx rx' > uci set system.led_lan_link.mode='link' I added support for passing the mode with https://dev.openwrt.org/changeset/48806 so your lines should become: ucidef_set_led_netdev "lan_act" "LANACT" "tellstick:green:lan" \ "eth0" "tx rx" ucidef_set_led_netdev "lan_link" "LANLINK" "tellstick:orange:lan" \ "eth0" "link" ~ Jow _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
